Re: [PATCH v2 1/4] Input: Add driver for Cypress Generation 5 touchscreen

[Andreas Kemnade]

Hi,

On Sun, 12 Dec 2021 21:45:48 -0800
Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx> wrote:

[...]
> > > This is also likely unsafe if controller is not completely shut off and
> > > is capable of generating interrupts given input device is not yet
> > > allocated.  
> > 
> > I have dropped the `IRQF_TRIGGER_FALLING |`
> > 
> > I have tried to use level interrupts, but I can't get the device
> > working with them.  
> 
> That is weird, does the interrupt controller support level interrupts?
> 
I have set level interrupts via the devicetree,
things seem to work on Kobo Clara HD:
/proc/interrupts
203:      37402  gpio-mxc   6 Level     tt21000

       touchscreen@24 {
                compatible = "cypress,tt21000";
                reg = <0x24>;
                pinctrl-names = "default","sleep";
                pinctrl-0 = <&pinctrl_cyttsp5_gpio>;
                pinctrl-1 = <&pinctrl_cyttsp5_gpio_sleep>;
                interrupt-parent = <&gpio5>;
                interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
                reset-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
        };

Regards,
Andreas