Re: [PATCH v2 2/5] iommu/mediatek: Always check runtime PM status in tlb flush range callback

[Yong Wu]

On Wed, 2021-12-08 at 14:07 +0200, Dafna Hirschfeld wrote:
> From: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> 
> In case of v4l2_reqbufs() it is possible, that a TLB flush is done
> without runtime PM being enabled. In that case the "Partial TLB flush
> timed out, falling back to full flush" warning is printed.
> 
> Commit c0b57581b73b ("iommu/mediatek: Add power-domain operation")
> introduced has_pm as optimization to avoid checking runtime PM
> when there is no power domain attached. But without the PM domain
> there is still the device driver's runtime PM suspend handler, which
> disables the clock. Thus flushing should also be avoided when there
> is no PM domain involved.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@xxxxxxxxxxxxx>
> Reviewed-by: Dafna Hirschfeld <dafna.hirschfeld@xxxxxxxxxxxxx>

Reviewed-by: Yong Wu <yong.wu@xxxxxxxxxxxx>

> ---
>  drivers/iommu/mtk_iommu.c | 10 +++-------
>  1 file changed, 3 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 342aa562ab6a..dd2c08c54df4 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -225,16 +225,13 @@ static void
> mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  					   size_t granule,
>  					   struct mtk_iommu_data *data)
>  {
> -	bool has_pm = !!data->dev->pm_domain;
>  	unsigned long flags;
>  	int ret;
>  	u32 tmp;
>  
>  	for_each_m4u(data) {
> -		if (has_pm) {
> -			if (pm_runtime_get_if_in_use(data->dev) <= 0)
> -				continue;
> -		}
> +		if (pm_runtime_get_if_in_use(data->dev) <= 0)
> +			continue;
>  
>  		spin_lock_irqsave(&data->tlb_lock, flags);
>  		writel_relaxed(F_INVLD_EN1 | F_INVLD_EN0,
> @@ -259,8 +256,7 @@ static void
> mtk_iommu_tlb_flush_range_sync(unsigned long iova, size_t size,
>  		writel_relaxed(0, data->base + REG_MMU_CPE_DONE);
>  		spin_unlock_irqrestore(&data->tlb_lock, flags);
>  
> -		if (has_pm)
> -			pm_runtime_put(data->dev);
> +		pm_runtime_put(data->dev);
>  	}
>  }
>