Re: [PATCH resend] gpio: aggregator: Add interrupt support

From: Bartosz Golaszewski
Date: Fri Dec 03 2021 - 09:58:32 EST


On Fri, Dec 3, 2021 at 3:56 PM Bartosz Golaszewski <brgl@xxxxxxxx> wrote:
>
> On Fri, Dec 3, 2021 at 3:06 PM Geert Uytterhoeven
> <geert+renesas@xxxxxxxxx> wrote:
> >
> > Currently the GPIO Aggregator does not support interrupts. This means
> > that kernel drivers going from a GPIO to an IRQ using gpiod_to_irq(),
> > and userspace applications using line events do not work.
> >
> > Add interrupt support by providing a gpio_chip.to_irq() callback, which
> > just calls into the parent GPIO controller.
> >
> > Note that this does not implement full interrupt controller (irq_chip)
> > support, so using e.g. gpio-keys with "interrupts" instead of "gpios"
> > still does not work.
> >
> > Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
> > ---
> > I would prefer to avoid implementing irq_chip support, until there is a
> > real use case for this.
> >
> > This has been tested with gpio-keys and gpiomon on the Koelsch
> > development board:
> >
> > - gpio-keys, using a DT overlay[1]:
> >
> > $ overlay add r8a7791-koelsch-keyboard-controlled-led
> > $ echo gpio-aggregator > /sys/devices/platform/frobnicator/driver_override
> > $ echo frobnicator > /sys/bus/platform/drivers/gpio-aggregator/bind
> >
> > $ gpioinfo frobnicator
> > gpiochip12 - 3 lines:
> > line 0: "light" "light" output active-high [used]
> > line 1: "on" "On" input active-low [used]
> > line 2: "off" "Off" input active-low [used]
> >
> > $ echo 255 > /sys/class/leds/light/brightness
> > $ echo 0 > /sys/class/leds/light/brightness
> >
> > $ evtest /dev/input/event0
> >
> > - gpiomon, using the GPIO sysfs API:
> >
> > $ echo keyboard > /sys/bus/platform/drivers/gpio-keys/unbind
> > $ echo e6055800.gpio 2,6 > /sys/bus/platform/drivers/gpio-aggregator/new_device
> > $ gpiomon gpiochip12 0 1
> >
> > [1] "ARM: dts: koelsch: Add overlay for keyboard-controlled LED"
> > https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers.git/commit/?h=topic/renesas-overlays&id=c78d817869e63a3485bb4ab98aeea6ce368a396e
> > ---
> > drivers/gpio/gpio-aggregator.c | 11 ++++++++++-
> > 1 file changed, 10 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpio/gpio-aggregator.c b/drivers/gpio/gpio-aggregator.c
> > index e9671d1660ef4b40..869dc952cf45218b 100644
> > --- a/drivers/gpio/gpio-aggregator.c
> > +++ b/drivers/gpio/gpio-aggregator.c
> > @@ -371,6 +371,13 @@ static int gpio_fwd_set_config(struct gpio_chip *chip, unsigned int offset,
> > return gpiod_set_config(fwd->descs[offset], config);
> > }
> >
> > +static int gpio_fwd_to_irq(struct gpio_chip *chip, unsigned int offset)
> > +{
> > + struct gpiochip_fwd *fwd = gpiochip_get_data(chip);
> > +
> > + return gpiod_to_irq(fwd->descs[offset]);
> > +}
> > +
> > /**
> > * gpiochip_fwd_create() - Create a new GPIO forwarder
> > * @dev: Parent device pointer
> > @@ -411,7 +418,8 @@ static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
> > for (i = 0; i < ngpios; i++) {
> > struct gpio_chip *parent = gpiod_to_chip(descs[i]);
> >
> > - dev_dbg(dev, "%u => gpio-%d\n", i, desc_to_gpio(descs[i]));
> > + dev_dbg(dev, "%u => gpio %d irq %d\n", i,
> > + desc_to_gpio(descs[i]), gpiod_to_irq(descs[i]));
> >
> > if (gpiod_cansleep(descs[i]))
> > chip->can_sleep = true;
> > @@ -429,6 +437,7 @@ static struct gpiochip_fwd *gpiochip_fwd_create(struct device *dev,
> > chip->get_multiple = gpio_fwd_get_multiple_locked;
> > chip->set = gpio_fwd_set;
> > chip->set_multiple = gpio_fwd_set_multiple_locked;
> > + chip->to_irq = gpio_fwd_to_irq;
> > chip->base = -1;
> > chip->ngpio = ngpios;
> > fwd->descs = descs;
> > --
> > 2.25.1
> >
>
> Applied, thanks!
>
> Bart

Eek, missed the explanation.

I think this is fine. For user-space eventual switch to a real
irq_chip won't break anything so let's take it.

Bart