RE: [EXT] Re: [PATCH v13 08/13] media: amphion: add v4l2 m2m vpu decoder stateful driver

[Ming Qian]

> -----Original Message-----
> From: Ming Qian
> Sent: Friday, December 3, 2021 1:43 PM
> To: Nicolas Dufresne <nicolas@xxxxxxxxxxxx>; mchehab@xxxxxxxxxx;
> shawnguo@xxxxxxxxxx; robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx
> Cc: hverkuil-cisco@xxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> dl-linux-imx <linux-imx@xxxxxxx>; Aisheng Dong <aisheng.dong@xxxxxxx>;
> linux-media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx;
> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Subject: RE: [EXT] Re: [PATCH v13 08/13] media: amphion: add v4l2 m2m vpu
> decoder stateful driver
> 
> > -----Original Message-----
> > From: Nicolas Dufresne [mailto:nicolas@xxxxxxxxxxxx]
> > Sent: Friday, December 3, 2021 12:56 PM
> > To: Ming Qian <ming.qian@xxxxxxx>; mchehab@xxxxxxxxxx;
> > shawnguo@xxxxxxxxxx; robh+dt@xxxxxxxxxx; s.hauer@xxxxxxxxxxxxxx
> > Cc: hverkuil-cisco@xxxxxxxxx; kernel@xxxxxxxxxxxxxx;
> > festevam@xxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>; Aisheng Dong
> > <aisheng.dong@xxxxxxx>; linux-media@xxxxxxxxxxxxxxx;
> > linux-kernel@xxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Subject: [EXT] Re: [PATCH v13 08/13] media: amphion: add v4l2 m2m vpu
> > decoder stateful driver
> >
> > Caution: EXT Email
> >
> > Le mardi 30 novembre 2021 à 17:48 +0800, Ming Qian a écrit :
> > > This consists of video decoder implementation plus decoder controls.
> > >
> > > Signed-off-by: Ming Qian <ming.qian@xxxxxxx>
> > > Signed-off-by: Shijie Qin <shijie.qin@xxxxxxx>
> > > Signed-off-by: Zhou Peng <eagle.zhou@xxxxxxx>
> > > ---
> > >  drivers/media/platform/amphion/vdec.c | 1680
> > +++++++++++++++++++++++++
> 
> 
> > > +
> > > +static void vdec_init_fmt(struct vpu_inst *inst) {
> > > +     struct vdec_t *vdec = inst->priv;
> > > +     const struct vpu_format *fmt;
> > > +     int i;
> > > +
> > > +     fmt = vpu_helper_find_format(inst, inst->cap_format.type,
> > vdec->codec_info.pixfmt);
> > > +     inst->out_format.width = vdec->codec_info.width;
> > > +     inst->out_format.height = vdec->codec_info.height;
> > > +     inst->cap_format.width = vdec->codec_info.decoded_width;
> > > +     inst->cap_format.height = vdec->codec_info.decoded_height;
> > > +     inst->cap_format.pixfmt = vdec->codec_info.pixfmt;
> > > +     if (fmt) {
> > > +             inst->cap_format.num_planes = fmt->num_planes;
> > > +             inst->cap_format.flags = fmt->flags;
> > > +     }
> > > +     for (i = 0; i < inst->cap_format.num_planes; i++) {
> > > +             inst->cap_format.bytesperline[i] =
> > vdec->codec_info.bytesperline[i];
> > > +             inst->cap_format.sizeimage[i] =
> > vdec->codec_info.sizeimage[i];
> > > +     }
> > > +     if (vdec->codec_info.progressive)
> > > +             inst->cap_format.field = V4L2_FIELD_NONE;
> > > +     else
> > > +             inst->cap_format.field = V4L2_FIELD_INTERLACED;
> >
> > As a followup, this should be conditional to the chosen pixel format.
> > If I understood correct, you produce interlaced is only produce for
> > linear NV12, for tiled the fields are outputed seperated in their
> > respective v4l2_buffer. Note sure where yet, but the V4L2 spec
> > requires you to pair the fields by using the same seq_num on both.
> 
> The amphion vpu will store the two fields into one v4l2_buf, So I'll change
> V4L2_FIELD_INTERLACED to V4L2_FIELD_SEQ_TB
> 

Hi Nicolas,
    Seems gstreamer doesn't support V4L2_FIELD_SEQ_TB yet.

  switch (fmt.fmt.pix.field) {
    case V4L2_FIELD_ANY:
    case V4L2_FIELD_NONE:
      interlace_mode = GST_VIDEO_INTERLACE_MODE_PROGRESSIVE;
      break;
    case V4L2_FIELD_INTERLACED:
    case V4L2_FIELD_INTERLACED_TB:
    case V4L2_FIELD_INTERLACED_BT:
      interlace_mode = GST_VIDEO_INTERLACE_MODE_INTERLEAVED;
      break;
    case V4L2_FIELD_ALTERNATE:
      interlace_mode = GST_VIDEO_INTERLACE_MODE_ALTERNATE;
      break;
    default:
      goto unsupported_field;
  }

> >
> > > +     if (vdec->codec_info.color_primaries ==
> V4L2_COLORSPACE_DEFAULT)
> > > +             vdec->codec_info.color_primaries =
> > V4L2_COLORSPACE_REC709;
> > > +     if (vdec->codec_info.transfer_chars == V4L2_XFER_FUNC_DEFAULT)
> > > +             vdec->codec_info.transfer_chars = V4L2_XFER_FUNC_709;
> > > +     if (vdec->codec_info.matrix_coeffs == V4L2_YCBCR_ENC_DEFAULT)
> > > +             vdec->codec_info.matrix_coeffs = V4L2_YCBCR_ENC_709;
> > > +     if (vdec->codec_info.full_range == V4L2_QUANTIZATION_DEFAULT)
> > > +             vdec->codec_info.full_range =
> > V4L2_QUANTIZATION_LIM_RANGE;
> > > +}
> > > +