Re: [PATCH v6 7/7] drm/mediatek: Add mt8195 DisplayPort driver
From: Guillaume Ranquet
Date: Thu Dec 02 2021 - 10:31:11 EST
Hi Chun-Kuang.
Quoting Chun-Kuang Hu (2021-11-25 16:27:45)
> Hi, Guillaume:
>
> This is a big patch, so I give some comment first.
>
> Guillaume Ranquet <granquet@xxxxxxxxxxxx> 於 2021年11月10日 週三 下午9:06寫道：
> >
> > From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> >
> > This patch adds a DisplayPort driver for the Mediatek mt8195 SoC and a
> > according phy driver mediatek-dp-phy.
> >
> > It supports both functional units on the mt8195, the embedded
> > DisplayPort as well as the external DisplayPort units. It offers
> > hot-plug-detection, audio up to 8 channels, and DisplayPort 1.4 with up
> > to 4 lanes.
> >
> > The driver creates a child device for the phy. The child device will
> > never exist without the parent being active. As they are sharing a
> > register range, the parent passes a regmap pointer to the child so that
> > both can work with the same register range. The phy driver sets device
> > data that is read by the parent to get the phy device that can be used
> > to control the phy properties.
> >
> > This driver is based on an initial version by
> > Jason-JH.Lin <jason-jh.lin@xxxxxxxxxxxx>.
> >
> > Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> > Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> > Reported-by: kernel test robot <lkp@xxxxxxxxx>
> > ---
> > drivers/gpu/drm/drm_edid.c | 2 +-
>
> Separate this to another patch.
>
> > drivers/gpu/drm/mediatek/Kconfig | 7 +
> > drivers/gpu/drm/mediatek/Makefile | 2 +
> > drivers/gpu/drm/mediatek/mtk_dp.c | 3094 +++++++++++++++++++++++
> > drivers/gpu/drm/mediatek/mtk_dp_reg.h | 568 +++++
> > drivers/gpu/drm/mediatek/mtk_dpi.c | 111 +-
>
> Ditto.
>
> > drivers/gpu/drm/mediatek/mtk_dpi_regs.h | 26 +
>
> Ditto.
>
> > drivers/gpu/drm/mediatek/mtk_drm_drv.c | 1 +
>
> Ditto
>
> > drivers/gpu/drm/mediatek/mtk_drm_drv.h | 1 +
>
> Ditto
>
yes my bad, I've made a bunch of fixup which ended up in the wrong place.
It will be fixed for the next version.
> > 9 files changed, 3799 insertions(+), 13 deletions(-)
> > create mode 100644 drivers/gpu/drm/mediatek/mtk_dp.c
> > create mode 100644 drivers/gpu/drm/mediatek/mtk_dp_reg.h
> >
> > diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
> > index 500279a82167a..bfd98b50ceb5b 100644
> > --- a/drivers/gpu/drm/drm_edid.c
> > +++ b/drivers/gpu/drm/drm_edid.c
> > @@ -5183,7 +5183,7 @@ static void drm_parse_hdmi_deep_color_info(struct drm_connector *connector,
> > * modes and forbids YCRCB422 support for all video modes per
> > * HDMI 1.3 spec.
> > */
> > - info->color_formats = DRM_COLOR_FORMAT_RGB444;
> > + info->color_formats |= DRM_COLOR_FORMAT_RGB444;
> >
> > /* YCRCB444 is optional according to spec. */
> > if (hdmi[6] & DRM_EDID_HDMI_DC_Y444) {
> > diff --git a/drivers/gpu/drm/mediatek/Kconfig b/drivers/gpu/drm/mediatek/Kconfig
> > index 2976d21e9a34a..029b94c716131 100644
> > --- a/drivers/gpu/drm/mediatek/Kconfig
> > +++ b/drivers/gpu/drm/mediatek/Kconfig
> > @@ -28,3 +28,10 @@ config DRM_MEDIATEK_HDMI
> > select PHY_MTK_HDMI
> > help
> > DRM/KMS HDMI driver for Mediatek SoCs
> > +
> > +config MTK_DPTX_SUPPORT
> > + tristate "DRM DPTX Support for Mediatek SoCs"
> > + depends on DRM_MEDIATEK
> > + select PHY_MTK_DP
> > + help
> > + DRM/KMS Display Port driver for Mediatek SoCs.
> > diff --git a/drivers/gpu/drm/mediatek/Makefile b/drivers/gpu/drm/mediatek/Makefile
> > index 29098d7c8307c..d86a6406055e6 100644
> > --- a/drivers/gpu/drm/mediatek/Makefile
> > +++ b/drivers/gpu/drm/mediatek/Makefile
> > @@ -21,3 +21,5 @@ mediatek-drm-hdmi-objs := mtk_cec.o \
> > mtk_hdmi_ddc.o
> >
> > obj-$(CONFIG_DRM_MEDIATEK_HDMI) += mediatek-drm-hdmi.o
> > +
> > +obj-$(CONFIG_MTK_DPTX_SUPPORT) += mtk_dp.o
> > diff --git a/drivers/gpu/drm/mediatek/mtk_dp.c b/drivers/gpu/drm/mediatek/mtk_dp.c
> > new file mode 100644
> > index 0000000000000..83087219d5a5e
> > --- /dev/null
> > +++ b/drivers/gpu/drm/mediatek/mtk_dp.c
> > @@ -0,0 +1,3094 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2019 MediaTek Inc.
> > + * Copyright (c) 2021 BayLibre
> > + */
> > +
> > +#include <drm/drm_atomic_helper.h>
> > +#include <drm/drm_bridge.h>
> > +#include <drm/drm_crtc.h>
> > +#include <drm/drm_dp_helper.h>
> > +#include <drm/drm_edid.h>
> > +#include <drm/drm_of.h>
> > +#include <drm/drm_panel.h>
> > +#include <drm/drm_print.h>
> > +#include <drm/drm_probe_helper.h>
> > +#include <linux/arm-smccc.h>
> > +#include <linux/clk.h>
> > +#include <linux/delay.h>
> > +#include <linux/errno.h>
> > +#include <linux/kernel.h>
> > +#include <linux/nvmem-consumer.h>
> > +#include <linux/of.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/of_platform.h>
> > +#include <linux/phy/phy.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/pm_runtime.h>
> > +#include <linux/regmap.h>
> > +#include <sound/hdmi-codec.h>
> > +#include <video/videomode.h>
> > +
> > +#include "mtk_dp_reg.h"
> > +
> > +#define MTK_DP_AUX_WAIT_REPLY_COUNT 20
> > +#define MTK_DP_CHECK_SINK_CAP_TIMEOUT_COUNT 3
> > +
> > +#define MTK_DP_MAX_LANES 4
> > +#define MTK_DP_MAX_LINK_RATE MTK_DP_LINKRATE_HBR3
> > +
> > +#define MTK_DP_TBC_BUF_READ_START_ADDR 0x08
> > +
> > +#define MTK_DP_TRAIN_RETRY_LIMIT 8
> > +#define MTK_DP_TRAIN_MAX_ITERATIONS 5
> > +
> > +#define MTK_DP_AUX_WRITE_READ_WAIT_TIME_US 20
> > +
> > +#define MTK_DP_DP_VERSION_11 0x11
> > +
> > +enum mtk_dp_state {
> > + MTK_DP_STATE_INITIAL,
> > + MTK_DP_STATE_IDLE,
> > + MTK_DP_STATE_PREPARE,
> > + MTK_DP_STATE_NORMAL,
> > +};
> > +
> > +enum mtk_dp_train_state {
> > + MTK_DP_TRAIN_STATE_STARTUP = 0,
> > + MTK_DP_TRAIN_STATE_CHECKCAP,
> > + MTK_DP_TRAIN_STATE_CHECKEDID,
> > + MTK_DP_TRAIN_STATE_TRAINING_PRE,
> > + MTK_DP_TRAIN_STATE_TRAINING,
> > + MTK_DP_TRAIN_STATE_CHECKTIMING,
> > + MTK_DP_TRAIN_STATE_NORMAL,
> > + MTK_DP_TRAIN_STATE_POWERSAVE,
> > + MTK_DP_TRAIN_STATE_DPIDLE,
> > +};
> > +
> > +struct mtk_dp_timings {
> > + struct videomode vm;
> > +
> > + u16 htotal;
> > + u16 vtotal;
> > + u8 frame_rate;
> > + u32 pix_rate_khz;
> > +};
> > +
> > +struct mtk_dp_train_info {
> > + bool tps3;
> > + bool tps4;
> > + bool sink_ssc;
> > + bool cable_plugged_in;
> > + bool cable_state_change;
> > + bool cr_done;
> > + bool eq_done;
> > +
> > + // link_rate is in multiple of 0.27Gbps
> > + int link_rate;
> > + int lane_count;
> > +
> > + int irq_status;
> > + int check_cap_count;
> > +};
> > +
> > +// Same values as used by the DP Spec for MISC0 bits 1 and 2
> > +enum mtk_dp_color_format {
> > + MTK_DP_COLOR_FORMAT_RGB_444 = 0,
> > + MTK_DP_COLOR_FORMAT_YUV_422 = 1,
> > + MTK_DP_COLOR_FORMAT_YUV_444 = 2,
> > + MTK_DP_COLOR_FORMAT_YUV_420 = 3,
> > + MTK_DP_COLOR_FORMAT_YONLY = 4,
> > + MTK_DP_COLOR_FORMAT_RAW = 5,
> > + MTK_DP_COLOR_FORMAT_RESERVED = 6,
> > + MTK_DP_COLOR_FORMAT_DEFAULT = MTK_DP_COLOR_FORMAT_RGB_444,
> > + MTK_DP_COLOR_FORMAT_UNKNOWN = 15,
> > +};
> > +
> > +// Multiple of 0.27Gbps
> > +enum mtk_dp_linkrate {
> > + MTK_DP_LINKRATE_RBR = 0x6,
> > + MTK_DP_LINKRATE_HBR = 0xA,
> > + MTK_DP_LINKRATE_HBR2 = 0x14,
> > + MTK_DP_LINKRATE_HBR25 = 0x19,
> > + MTK_DP_LINKRATE_HBR3 = 0x1E,
> > +};
> > +
> > +// Same values as used for DP Spec MISC0 bits 5,6,7
> > +enum mtk_dp_color_depth {
> > + MTK_DP_COLOR_DEPTH_6BIT = 0,
> > + MTK_DP_COLOR_DEPTH_8BIT = 1,
> > + MTK_DP_COLOR_DEPTH_10BIT = 2,
> > + MTK_DP_COLOR_DEPTH_12BIT = 3,
> > + MTK_DP_COLOR_DEPTH_16BIT = 4,
> > + MTK_DP_COLOR_DEPTH_UNKNOWN = 5,
> > +};
> > +
> > +struct mtk_dp_audio_cfg {
> > + int sample_rate;
> > + int word_length_bits;
> > + int channels;
> > +};
> > +
> > +struct mtk_dp_info {
> > + enum mtk_dp_color_depth depth;
> > + enum mtk_dp_color_format format;
> > + struct mtk_dp_audio_cfg audio_caps;
> > + struct mtk_dp_timings timings;
> > +};
> > +
> > +struct dp_cal_data {
> > + unsigned int glb_bias_trim;
> > + unsigned int clktx_impse;
> > +
> > + unsigned int ln0_tx_impsel_pmos;
> > + unsigned int ln0_tx_impsel_nmos;
> > + unsigned int ln1_tx_impsel_pmos;
> > + unsigned int ln1_tx_impsel_nmos;
> > + unsigned int ln2_tx_impsel_pmos;
> > + unsigned int ln2_tx_impsel_nmos;
> > + unsigned int ln3_tx_impsel_pmos;
> > + unsigned int ln3_tx_impsel_nmos;
> > +};
> > +
> > +struct mtk_dp {
> > + struct device *dev;
> > + struct platform_device *phy_dev;
> > + struct phy *phy;
> > + struct dp_cal_data cal_data;
> > +
> > + struct drm_device *drm_dev;
> > + struct drm_bridge bridge;
> > + struct drm_bridge *next_bridge;
> > + struct drm_dp_aux aux;
> > +
> > + struct mutex edid_lock;
> > + struct edid *edid;
> > +
> > + u8 rx_cap[DP_RECEIVER_CAP_SIZE];
> > +
> > + struct mtk_dp_info info;
> > + enum mtk_dp_state state;
> > +
> > + struct mtk_dp_train_info train_info;
> > + enum mtk_dp_train_state train_state;
> > + unsigned int input_fmt;
> > +
> > + struct regmap *regs;
> > + struct clk *dp_tx_clk;
> > +
> > + bool enabled;
> > + bool audio_enable;
> > +
> > + bool has_fec;
> > + struct mutex dp_lock;
> > +
> > + struct mutex update_plugged_status_lock;
> > +
> > + hdmi_codec_plugged_cb plugged_cb;
> > + struct device *codec_dev;
> > + u8 connector_eld[MAX_ELD_BYTES];
> > +};
> > +
> > +enum mtk_dp_sdp_type {
> > + MTK_DP_SDP_NONE = 0x00,
> > + MTK_DP_SDP_ACM = 0x01,
> > + MTK_DP_SDP_ISRC = 0x02,
> > + MTK_DP_SDP_AVI = 0x03,
> > + MTK_DP_SDP_AUI = 0x04,
> > + MTK_DP_SDP_SPD = 0x05,
> > + MTK_DP_SDP_MPEG = 0x06,
> > + MTK_DP_SDP_NTSC = 0x07,
> > + MTK_DP_SDP_VSP = 0x08,
> > + MTK_DP_SDP_VSC = 0x09,
> > + MTK_DP_SDP_EXT = 0x0A,
> > + MTK_DP_SDP_PPS0 = 0x0B,
> > + MTK_DP_SDP_PPS1 = 0x0C,
> > + MTK_DP_SDP_PPS2 = 0x0D,
> > + MTK_DP_SDP_PPS3 = 0x0E,
> > + MTK_DP_SDP_DRM = 0x10,
> > + MTK_DP_SDP_MAX_NUM
> > +};
> > +
> > +struct mtk_dp_sdp_packet {
> > + enum mtk_dp_sdp_type type;
> > + struct dp_sdp sdp;
> > +};
> > +
> > +#define MTK_DP_IEC_CHANNEL_STATUS_LEN 5
> > +union mtk_dp_audio_channel_status {
> > + struct {
> > + u8 rev : 1;
> > + u8 is_lpcm : 1;
> > + u8 copy_right : 1;
> > + u8 additional_format_info : 3;
> > + u8 channel_status_mode : 2;
> > + u8 category_code;
> > + u8 src_num : 4;
> > + u8 channel_num : 4;
> > + u8 sampling_freq : 4;
> > + u8 clk_accuracy : 2;
> > + u8 rev2 : 2;
> > + u8 word_len : 4;
> > + u8 original_sampling_freq : 4;
> > + } iec;
> > +
> > + u8 buf[MTK_DP_IEC_CHANNEL_STATUS_LEN];
> > +};
> > +
> > +static struct regmap_config mtk_dp_regmap_config = {
> > + .reg_bits = 32,
> > + .val_bits = 32,
> > + .reg_stride = 4,
> > + .max_register = SEC_OFFSET + 0x90,
> > + .name = "mtk-dp-registers",
> > +};
> > +
> > +static bool mtk_dp_is_edp(struct mtk_dp *mtk_dp)
>
> Separate edp and displayport into two patches. For example, the first
> patch support edp only, and the second patch add displayport function.
>
I have made the opposite as it seemed a bit more logical from how it's coded
now.
I've made a single patch with DP and a new one adding eDP support on top of it.
The change is quite small, adding the eDP on top of DP:
drivers/gpu/drm/mediatek/mtk_dp.c | 103
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-----------------------------
1 file changed, 74 insertions(+), 29 deletions(-)
> > +{
> > + return mtk_dp->next_bridge != NULL;
> > +}
> > +
>
> [snip]
>
> > +
> > +static struct edid *mtk_dp_get_edid(struct drm_bridge *bridge,
> > + struct drm_connector *connector)
> > +{
> > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> > + bool enabled = mtk_dp->enabled;
> > + struct edid *new_edid = NULL;
> > +
> > + if (!enabled)
> > + drm_bridge_chain_pre_enable(bridge);
>
> In mtk_hdmi_bridge_get_edid(), there does not check the power. Why in
> this function need this?
> Does mtk hdmi driver has a bug?
>
I don't know, but I will be asking around.
> > +
> > + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER, DP_SET_POWER_D0);
> > + usleep_range(2000, 5000);
> > +
> > + if (mtk_dp_plug_state(mtk_dp))
> > + new_edid = drm_get_edid(connector, &mtk_dp->aux.ddc);
> > +
> > + if (!enabled)
> > + drm_bridge_chain_post_disable(bridge);
> > +
> > + mutex_lock(&mtk_dp->edid_lock);
> > + kfree(mtk_dp->edid);
> > + mtk_dp->edid = NULL;
> > +
> > + if (!new_edid) {
> > + mutex_unlock(&mtk_dp->edid_lock);
> > + return NULL;
> > + }
> > +
> > + mtk_dp->edid = drm_edid_duplicate(new_edid);
> > + mutex_unlock(&mtk_dp->edid_lock);
> > +
> > + return new_edid;
> > +}
> > +
> > +static ssize_t mtk_dp_aux_transfer(struct drm_dp_aux *mtk_aux,
> > + struct drm_dp_aux_msg *msg)
> > +{
> > + ssize_t err = -EAGAIN;
> > + struct mtk_dp *mtk_dp;
> > + bool is_read;
> > + u8 request;
> > + size_t accessed_bytes = 0;
> > + int retry = 3, ret = 0;
> > +
> > + mtk_dp = container_of(mtk_aux, struct mtk_dp, aux);
> > +
> > + if (!mtk_dp->train_info.cable_plugged_in ||
> > + mtk_dp->train_info.irq_status & MTK_DP_HPD_DISCONNECT) {
> > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_CHECKCAP;
> > + err = -EAGAIN;
> > + goto err;
> > + }
> > +
> > + switch (msg->request) {
> > + case DP_AUX_I2C_MOT:
> > + case DP_AUX_I2C_WRITE:
> > + case DP_AUX_NATIVE_WRITE:
> > + case DP_AUX_I2C_WRITE_STATUS_UPDATE:
> > + case DP_AUX_I2C_WRITE_STATUS_UPDATE | DP_AUX_I2C_MOT:
> > + request = msg->request & ~DP_AUX_I2C_WRITE_STATUS_UPDATE;
> > + is_read = false;
> > + break;
> > + case DP_AUX_I2C_READ:
> > + case DP_AUX_NATIVE_READ:
> > + case DP_AUX_I2C_READ | DP_AUX_I2C_MOT:
> > + request = msg->request;
> > + is_read = true;
> > + break;
> > + default:
> > + drm_err(mtk_aux->drm_dev, "invalid aux cmd = %d\n",
> > + msg->request);
> > + err = -EINVAL;
> > + goto err;
>
> Directly return here.
>
Hmm, not sure yet, it seems I still need to prime msg->reply anyway.
Though the error handling can be simplified a bit.
> > + }
> > +
> > + if (msg->size == 0) {
> > + mtk_dp_aux_do_transfer(mtk_dp, is_read, request,
> > + msg->address + accessed_bytes,
> > + msg->buffer + accessed_bytes, 0);
> > + } else {
> > + while (accessed_bytes < msg->size) {
> > + size_t to_access =
> > + min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES,
> > + msg->size - accessed_bytes);
> > + retry = 3;
> > + while (retry--) {
> > + ret = mtk_dp_aux_do_transfer(
> > + mtk_dp, is_read, request,
> > + msg->address + accessed_bytes,
> > + msg->buffer + accessed_bytes,
> > + to_access);
> > + if (ret == 0)
> > + break;
> > + udelay(50);
> > + }
> > + if (!retry && ret) {
> > + drm_info(mtk_dp->drm_dev,
> > + "Failed to do AUX transfer: %d\n",
> > + ret);
> > + break;
> > + }
> > + accessed_bytes += to_access;
> > + }
> > + }
> > +err:
> > + if (!ret) {
> > + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
> > + ret = msg->size;
> > + } else {
> > + msg->reply = DP_AUX_NATIVE_REPLY_NACK | DP_AUX_I2C_REPLY_NACK;
> > + return err;
> > + }
> > +
> > + msg->reply = DP_AUX_NATIVE_REPLY_ACK | DP_AUX_I2C_REPLY_ACK;
> > + return msg->size;
> > +}
> > +
> > +static void mtk_dp_aux_init(struct mtk_dp *mtk_dp)
> > +{
> > + drm_dp_aux_init(&mtk_dp->aux);
> > + mtk_dp->aux.name = "aux_mtk_dp";
> > + mtk_dp->aux.transfer = mtk_dp_aux_transfer;
> > +}
> > +
> > +static void mtk_dp_poweroff(struct mtk_dp *mtk_dp)
> > +{
> > + mutex_lock(&mtk_dp->dp_lock);
> > +
> > + mtk_dp_hwirq_enable(mtk_dp, false);
> > + mtk_dp_power_disable(mtk_dp);
> > + phy_exit(mtk_dp->phy);
> > + clk_disable_unprepare(mtk_dp->dp_tx_clk);
> > +
> > + mutex_unlock(&mtk_dp->dp_lock);
> > +}
> > +
> > +static int mtk_dp_poweron(struct mtk_dp *mtk_dp)
> > +{
> > + int ret = 0;
> > +
> > + mutex_lock(&mtk_dp->dp_lock);
> > +
> > + ret = clk_prepare_enable(mtk_dp->dp_tx_clk);
> > + if (ret < 0) {
> > + dev_err(mtk_dp->dev, "Fail to enable clock: %d\n", ret);
> > + goto err;
> > + }
> > + ret = phy_init(mtk_dp->phy);
> > + if (ret) {
> > + dev_err(mtk_dp->dev, "Failed to initialize phy: %d\n", ret);
> > + goto err_phy_init;
> > + }
> > + ret = mtk_dp_phy_configure(mtk_dp, MTK_DP_LINKRATE_RBR, 1);
> > + if (ret) {
> > + dev_err(mtk_dp->dev, "Failed to configure phy: %d\n", ret);
> > + goto err_phy_config;
> > + }
> > +
> > + mtk_dp_init_port(mtk_dp);
> > + mtk_dp_power_enable(mtk_dp);
> > + mtk_dp_hwirq_enable(mtk_dp, true);
> > +
> > +err_phy_config:
> > + phy_exit(mtk_dp->phy);
> > +err_phy_init:
> > + clk_disable_unprepare(mtk_dp->dp_tx_clk);
> > +err:
> > + mutex_unlock(&mtk_dp->dp_lock);
> > + return ret;
> > +}
> > +
> > +static int mtk_dp_bridge_attach(struct drm_bridge *bridge,
> > + enum drm_bridge_attach_flags flags)
> > +{
> > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> > + int ret;
> > +
> > + if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR)) {
> > + dev_err(mtk_dp->dev, "Driver does not provide a connector!");
> > + return -EINVAL;
> > + }
> > +
> > + ret = mtk_dp_poweron(mtk_dp);
>
> Move the power on to mtk_dp_bridge_atomic_enable().
>
> > + if (ret)
> > + return ret;
> > +
> > + if (mtk_dp->next_bridge) {
> > + ret = drm_bridge_attach(bridge->encoder, mtk_dp->next_bridge,
> > + &mtk_dp->bridge, flags);
> > + if (ret) {
> > + drm_warn(mtk_dp->drm_dev,
> > + "Failed to attach external bridge: %d\n", ret);
> > + goto err_bridge_attach;
> > + }
> > + }
> > +
> > + mtk_dp->drm_dev = bridge->dev;
> > +
> > + return 0;
> > +
> > +err_bridge_attach:
> > + mtk_dp_poweroff(mtk_dp);
> > + return ret;
> > +}
> > +
> > +static void mtk_dp_bridge_detach(struct drm_bridge *bridge)
> > +{
> > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> > +
> > + mtk_dp->drm_dev = NULL;
> > +
> > + mtk_dp_poweroff(mtk_dp);
> > +}
> > +
> > +static void mtk_dp_bridge_atomic_disable(struct drm_bridge *bridge,
> > + struct drm_bridge_state *old_state)
> > +{
> > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> > +
> > + mtk_dp_video_mute(mtk_dp, true);
> > + mtk_dp_audio_mute(mtk_dp, true);
> > + mtk_dp->state = MTK_DP_STATE_IDLE;
> > + mtk_dp->train_state = MTK_DP_TRAIN_STATE_STARTUP;
> > +
> > + mtk_dp->enabled = false;
> > + msleep(100);
> > +}
> > +
> > +static void mtk_dp_parse_drm_mode_timings(struct mtk_dp *mtk_dp,
> > + struct drm_display_mode *mode)
> > +{
> > + struct mtk_dp_timings *timings = &mtk_dp->info.timings;
> > +
> > + drm_display_mode_to_videomode(mode, &timings->vm);
> > + timings->frame_rate = mode->clock * 1000 / mode->htotal / mode->vtotal;
> > + timings->htotal = mode->htotal;
> > + timings->vtotal = mode->vtotal;
> > +}
> > +
> > +static void mtk_dp_bridge_atomic_enable(struct drm_bridge *bridge,
> > + struct drm_bridge_state *old_state)
> > +{
> > + struct mtk_dp *mtk_dp = mtk_dp_from_bridge(bridge);
> > + struct drm_connector *conn;
> > + struct drm_connector_state *conn_state;
> > + struct drm_crtc *crtc;
> > + struct drm_crtc_state *crtc_state;
> > + int ret = 0;
> > + int i;
> > +
> > + conn = drm_atomic_get_new_connector_for_encoder(old_state->base.state,
> > + bridge->encoder);
>
> mtk_dp->conn = drm_atomic_get_new_connector_for_encoder(old_state->base.state,
> bridge->encoder);
>
The connector doesn't seem to be used anywhere else in the driver.
Though I can add a drm_connector in the mtk_dp struct.
> > + if (!conn) {
> > + drm_err(mtk_dp->drm_dev,
> > + "Can't enable bridge as connector is missing\n");
> > + return;
> > + }
> > +
> > + memcpy(mtk_dp->connector_eld, conn->eld, MAX_ELD_BYTES);
> > +
> > + conn_state =
> > + drm_atomic_get_new_connector_state(old_state->base.state, conn);
> > + if (!conn_state) {
> > + drm_err(mtk_dp->drm_dev,
> > + "Can't enable bridge as connector state is missing\n");
> > + return;
> > + }
> > +
> > + crtc = conn_state->crtc;
> > + if (!crtc) {
> > + drm_err(mtk_dp->drm_dev,
> > + "Can't enable bridge as connector state doesn't have a crtc\n");
> > + return;
> > + }
> > +
> > + crtc_state = drm_atomic_get_new_crtc_state(old_state->base.state, crtc);
> > + if (!crtc_state) {
> > + drm_err(mtk_dp->drm_dev,
> > + "Can't enable bridge as crtc state is missing\n");
> > + return;
> > + }
> > +
> > + mtk_dp_parse_drm_mode_timings(mtk_dp, &crtc_state->adjusted_mode);
>
> Refer to mtk_hdmi_bridge_atomic_enable() for getting the mode.
>
I'm sorry, I don't understand what I'm supposed to do here.
Could you elaborate?
> > + if (!mtk_dp_parse_capabilities(mtk_dp)) {
> > + drm_err(mtk_dp->drm_dev,
> > + "Can't enable bridge as nothing is plugged in\n");
> > + return;
> > + }
> > +
> > + //training
>
> Run checkpatch first.
>
> Regards,
> Chun-Kuang.
>
> > + for (i = 0; i < 50; i++) {
> > + ret = mtk_dp_train_handler(mtk_dp);
> > + if (ret) {
> > + drm_err(mtk_dp->drm_dev, "Train handler failed %d\n",
> > + ret);
> > + return;
> > + }
> > +
> > + ret = mtk_dp_state_handler(mtk_dp);
> > + if (ret) {
> > + drm_err(mtk_dp->drm_dev, "State handler failed %d\n",
> > + ret);
> > + return;
> > + }
> > + }
> > +
> > + mtk_dp->enabled = true;
> > + mtk_dp_update_plugged_status(mtk_dp);
> > +}
> > +
>
>
>
> > --
> > 2.32.0
> >