Re: [PATCH v2 2/2] dt-bindings: bus: imx-weim: add words about continuous bclk

[Rob Herring]

On Wed, Nov 24, 2021 at 08:55:42PM +0300, Ivan Bornyakov wrote:
> Document continuous Burst Clock option. With this option Burst Clock, if
> enabled, will output continuous clock, otherwise Burst Clock will output
> clock only when necessary.

Missing S-o-b. checkpatch.pl will tell you this.

> ---
>  Documentation/devicetree/bindings/bus/imx-weim.txt | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
> index 1b1d1c5c21ea..e7f502070d77 100644
> --- a/Documentation/devicetree/bindings/bus/imx-weim.txt
> +++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
> @@ -48,6 +48,11 @@ Optional properties:
>  			devices, the presence of this property indicates that
>  			the weim bus should operate in Burst Clock Mode.
>  
> + - fsl,continuous-burst-clk	Make Burst Clock to output continuous clock.
> +			Without this option Burst Clock will output clock
> +			only when necessary. This takes effect only if
> +			"fsl,burst-clk-enable" is set.
> +
>  Timing property for child nodes. It is mandatory, not optional.
>  
>   - fsl,weim-cs-timing:	The timing array, contains timing values for the
> -- 
> 2.32.0
> 
> 
>