[PATCH 22/25] selftests/sgx: Test invalid access to removed enclave page

From: Reinette Chatre
Date: Wed Dec 01 2021 - 14:25:33 EST

Next message: Kees Cook: "Re: [PATCH] module: add in-kernel support for decompressing"
Previous message: Reinette Chatre: "[PATCH 20/25] selftests/sgx: Test complete changing of page type flow"
In reply to: Reinette Chatre: "[PATCH 20/25] selftests/sgx: Test complete changing of page type flow"
Next in thread: Dave Hansen: "Re: [PATCH 00/25] x86/sgx and selftests/sgx: Support SGX2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

Removing a page from an initialized enclave involves three steps:
(1) the user requests changing the page type to SGX_PAGE_TYPE_TRIM
via the SGX_IOC_PAGE_MODT ioctl, (2) on success the ENCLU[EACCEPT]
instruction is run from within the enclave to accept the page removal,
(3) the user initiates the actual removal of the page via the
SGX_IOC_PAGE_REMOVE ioctl.

Test two possible invalid accesses during the page removal flow:
* Test the behavior when a request to remove the page by changing its
type to SGX_PAGE_TYPE_TRIM completes successfully but instead of
executing ENCLU[EACCEPT] from within the enclave the enclave attempts
to read from the page. Even though the page is accessible from the
page table entries its type is SGX_PAGE_TYPE_TRIM and thus not
accessible according to SGX. The expected behavior is a page fault
with the SGX flag set in the error code.
* Test the behavior when the page type is changed successfully and
ENCLU[EACCEPT] was run from within the enclave. The final ioctl,
SGX_IOC_PAGE_REMOVE, is omitted and replaced with an attempt to access
the page. Even though the page is accessible from the page table
entries its type is SGX_PAGE_TYPE_TRIM and thus not accessible
according to SGX. The expected behavior is a page fault with the
SGX flag set in the error code.

Signed-off-by: Reinette Chatre <reinette.chatre@xxxxxxxxx>
---
tools/testing/selftests/sgx/main.c | 243 +++++++++++++++++++++++++++++
1 file changed, 243 insertions(+)

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index f71f943099fb..3bee8fa557fd 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -1606,4 +1606,247 @@ TEST_F(enclave, remove_added_page_no_eaccept)
EXPECT_EQ(remove_ioc.count, 0);
}

+/*
+ * Request enclave page removal but instead of correctly following with
+ * EACCEPT a read attempt to page is made from within the enclave.
+ */
+TEST_F(enclave, remove_added_page_invalid_access)
+{
+ struct encl_op_get_from_addr get_addr_op;
+ struct encl_op_put_to_addr put_addr_op;
+ unsigned long data_start;
+ struct sgx_page_modt ioc;
+ int ret, errno_save;
+
+ ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata));
+
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ /*
+ * Hardware (SGX2) and OS support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&ioc, 0, sizeof(ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return, "Kernel does not support test SGX_IOC_PAGE_MODT ioctl");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /*
+ * Page that will be removed is the second data page in the .data
+ * segment. This forms part of the local encl_buffer within the
+ * enclave.
+ */
+ data_start = self->encl.encl_base +
+ encl_get_data_offset(&self->encl) + PAGE_SIZE;
+
+ /*
+ * Sanity check that page at @data_start is writable before
+ * removing it.
+ *
+ * Start by writing MAGIC to test page.
+ */
+ put_addr_op.value = MAGIC;
+ put_addr_op.addr = data_start;
+ put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /*
+ * Read memory that was just written to, confirming that data
+ * previously written (MAGIC) is present. Only change two test
+ * parameters, rest are same as previous test.
+ */
+ get_addr_op.value = 0;
+ get_addr_op.addr = data_start;
+ get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ EXPECT_EQ(get_addr_op.value, MAGIC);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /* Start page removal by requesting change of page type to PT_TRIM */
+ memset(&ioc, 0, sizeof(ioc));
+
+ ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ ioc.length = PAGE_SIZE;
+ ioc.type = SGX_PAGE_TYPE_TRIM;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(ioc.result, 0);
+ EXPECT_EQ(ioc.count, 4096);
+
+ /*
+ * Read from page that was just removed.
+ */
+ get_addr_op.value = 0;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ /*
+ * From OS perspective the page is present but according to SGX the
+ * page should not be accessible so a #PF with SGX bit set is
+ * expected.
+ */
+
+ EXPECT_EQ(self->run.function, ERESUME);
+ EXPECT_EQ(self->run.exception_vector, 14);
+ EXPECT_EQ(self->run.exception_error_code, 0x8005);
+ EXPECT_EQ(self->run.exception_addr, data_start);
+}
+
+/*
+ * Request enclave page removal and correctly follow with
+ * EACCEPT but do not follow with removal ioctl but instead a read attempt
+ * to removed page is made from within the enclave.
+ */
+TEST_F(enclave, remove_added_page_invalid_access_after_eaccept)
+{
+ struct encl_op_get_from_addr get_addr_op;
+ struct encl_op_put_to_addr put_addr_op;
+ struct encl_op_eaccept eaccept_op;
+ unsigned long data_start;
+ struct sgx_page_modt ioc;
+ int ret, errno_save;
+
+ ASSERT_TRUE(setup_test_encl(ENCL_HEAP_SIZE_DEFAULT, &self->encl, _metadata));
+
+ memset(&self->run, 0, sizeof(self->run));
+ self->run.tcs = self->encl.encl_base;
+
+ /*
+ * Hardware (SGX2) and OS support is needed for this test. Start
+ * with check that test has a chance of succeeding.
+ */
+ memset(&ioc, 0, sizeof(ioc));
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &ioc);
+
+ if (ret == -1) {
+ if (errno == ENOTTY)
+ SKIP(return, "Kernel does not support test SGX_IOC_PAGE_MODT ioctl");
+ else if (errno == ENODEV)
+ SKIP(return, "System does not support SGX2");
+ }
+
+ /*
+ * Invalid parameters were provided during sanity check,
+ * expect command to fail.
+ */
+ EXPECT_EQ(ret, -1);
+
+ /*
+ * Page that will be removed is the second data page in the .data
+ * segment. This forms part of the local encl_buffer within the
+ * enclave.
+ */
+ data_start = self->encl.encl_base +
+ encl_get_data_offset(&self->encl) + PAGE_SIZE;
+
+ /*
+ * Sanity check that page at @data_start is writable before
+ * removing it.
+ *
+ * Start by writing MAGIC to test page.
+ */
+ put_addr_op.value = MAGIC;
+ put_addr_op.addr = data_start;
+ put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /*
+ * Read memory that was just written to, confirming that data
+ * previously written (MAGIC) is present. Only change two test
+ * parameters, rest are same as previous test.
+ */
+ get_addr_op.value = 0;
+ get_addr_op.addr = data_start;
+ get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ EXPECT_EQ(get_addr_op.value, MAGIC);
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+
+ /* Start page removal by requesting change of page type to PT_TRIM */
+ memset(&ioc, 0, sizeof(ioc));
+
+ ioc.offset = encl_get_data_offset(&self->encl) + PAGE_SIZE;
+ ioc.length = PAGE_SIZE;
+ ioc.type = SGX_PAGE_TYPE_TRIM;
+
+ ret = ioctl(self->encl.fd, SGX_IOC_PAGE_MODT, &ioc);
+ errno_save = ret == -1 ? errno : 0;
+
+ EXPECT_EQ(ret, 0);
+ EXPECT_EQ(errno_save, 0);
+ EXPECT_EQ(ioc.result, 0);
+ EXPECT_EQ(ioc.count, 4096);
+
+ eaccept_op.epc_addr = (unsigned long)data_start;
+ eaccept_op.ret = 0;
+ eaccept_op.flags = SGX_SECINFO_TRIM | SGX_SECINFO_MODIFIED;
+ eaccept_op.header.type = ENCL_OP_EACCEPT;
+
+ EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
+
+ EXPECT_EEXIT(&self->run);
+ EXPECT_EQ(self->run.exception_vector, 0);
+ EXPECT_EQ(self->run.exception_error_code, 0);
+ EXPECT_EQ(self->run.exception_addr, 0);
+ EXPECT_EQ(eaccept_op.ret, 0);
+
+ /* Skip ioctl to remove page */
+
+ /*
+ * Read from page that was just removed.
+ */
+ get_addr_op.value = 0;
+
+ EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+ /*
+ * From OS perspective the page is present but according to SGX the
+ * page should not be accessible so a #PF with SGX bit set is
+ * expected.
+ */
+
+ EXPECT_EQ(self->run.function, ERESUME);
+ EXPECT_EQ(self->run.exception_vector, 14);
+ EXPECT_EQ(self->run.exception_error_code, 0x8005);
+ EXPECT_EQ(self->run.exception_addr, data_start);
+}
+
TEST_HARNESS_MAIN
--
2.25.1

Next message: Kees Cook: "Re: [PATCH] module: add in-kernel support for decompressing"
Previous message: Reinette Chatre: "[PATCH 20/25] selftests/sgx: Test complete changing of page type flow"
In reply to: Reinette Chatre: "[PATCH 20/25] selftests/sgx: Test complete changing of page type flow"
Next in thread: Dave Hansen: "Re: [PATCH 00/25] x86/sgx and selftests/sgx: Support SGX2"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]