Re: [PATCH 2/2] usb: typec: tipd: Fix initialization sequence for cd321x

From: Heikki Krogerus
Date: Thu Nov 18 2021 - 08:12:24 EST


Hi,

On Thu, Nov 18, 2021 at 12:14:50AM +0900, Hector Martin wrote:
> The power state switch needs to happen first, as that
> kickstarts the firmware into normal mode.
>
> Signed-off-by: Hector Martin <marcan@xxxxxxxxx>

Reviewed-by: Heikki Krogerus <heikki.krogerus@xxxxxxxxxxxxxxx>

Please resend these with the appropriate Fixes tag included.

> ---
> drivers/usb/typec/tipd/core.c | 33 ++++++++++++++++-----------------
> 1 file changed, 16 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/usb/typec/tipd/core.c b/drivers/usb/typec/tipd/core.c
> index 4da5a0b2aed2..6d27a5b5e3ca 100644
> --- a/drivers/usb/typec/tipd/core.c
> +++ b/drivers/usb/typec/tipd/core.c
> @@ -707,6 +707,7 @@ static int tps6598x_probe(struct i2c_client *client)
> u32 conf;
> u32 vid;
> int ret;
> + u64 mask1;
>
> tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
> if (!tps)
> @@ -730,11 +731,6 @@ static int tps6598x_probe(struct i2c_client *client)
> if (i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
> tps->i2c_protocol = true;
>
> - /* Make sure the controller has application firmware running */
> - ret = tps6598x_check_mode(tps);
> - if (ret)
> - return ret;
> -
> if (np && of_device_is_compatible(np, "apple,cd321x")) {
> /* Switch CD321X chips to the correct system power state */
> ret = cd321x_switch_power_state(tps, TPS_SYSTEM_POWER_STATE_S0);
> @@ -742,24 +738,27 @@ static int tps6598x_probe(struct i2c_client *client)
> return ret;
>
> /* CD321X chips have all interrupts masked initially */
> - ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
> - APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
> - APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
> - APPLE_CD_REG_INT_PLUG_EVENT);
> - if (ret)
> - return ret;
> + mask1 = APPLE_CD_REG_INT_POWER_STATUS_UPDATE |
> + APPLE_CD_REG_INT_DATA_STATUS_UPDATE |
> + APPLE_CD_REG_INT_PLUG_EVENT;
>
> irq_handler = cd321x_interrupt;
> } else {
> /* Enable power status, data status and plug event interrupts */
> - ret = tps6598x_write64(tps, TPS_REG_INT_MASK1,
> - TPS_REG_INT_POWER_STATUS_UPDATE |
> - TPS_REG_INT_DATA_STATUS_UPDATE |
> - TPS_REG_INT_PLUG_EVENT);
> - if (ret)
> - return ret;
> + mask1 = TPS_REG_INT_POWER_STATUS_UPDATE |
> + TPS_REG_INT_DATA_STATUS_UPDATE |
> + TPS_REG_INT_PLUG_EVENT;
> }
>
> + /* Make sure the controller has application firmware running */
> + ret = tps6598x_check_mode(tps);
> + if (ret)
> + return ret;
> +
> + ret = tps6598x_write64(tps, TPS_REG_INT_MASK1, mask1);
> + if (ret)
> + return ret;
> +
> ret = tps6598x_read32(tps, TPS_REG_STATUS, &status);
> if (ret < 0)
> return ret;
> --
> 2.33.0

thanks,

--
heikki