[PATCH 05/16] arm64: dts: qcom: sm[68]350: Use interrupts-extended with pdc interrupts

[Konrad Dybcio]

Using interrupts = <&pdc X Y> makes the interrupt framework interpret this as
the &pdc-nth range of the main interrupt controller (GIC). Fix it.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 ++--
 arch/arm64/boot/dts/qcom/sm8350.dtsi | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 43c8ecb85d17..8fcf04edbf30 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -842,7 +842,7 @@ tsens0: thermal-sensor@c263000 {
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -853,7 +853,7 @@ tsens1: thermal-sensor@c265000 {
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 60866a20a55c..f3e8549c6572 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -923,7 +923,7 @@ tsens0: thermal-sensor@c263000 {
 			reg = <0 0x0c263000 0 0x1ff>, /* TM */
 			      <0 0x0c222000 0 0x8>; /* SROT */
 			#qcom,sensors = <15>;
-			interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 28 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
@@ -934,7 +934,7 @@ tsens1: thermal-sensor@c265000 {
 			reg = <0 0x0c265000 0 0x1ff>, /* TM */
 			      <0 0x0c223000 0 0x8>; /* SROT */
 			#qcom,sensors = <14>;
-			interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>,
 				     <&pdc 29 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
-- 
2.33.1