[PATCH v3 0/8] Improve support for Xiaomi Redmi Note 7

[Dang Huynh]

This series expand the Redmi Note 7 device port to support:
 + Regulators
 + Volume keys
 + eMMC and SD card slot
 + Framebuffer display
 + USB

Changes in v2:
 - Dropped linux,input-type from volume up as 1 is set by default.
 - Dropped gpio-key,wakeup as it's a legacy property name and is
not relevant for a volume button.
 - Rename label cont_splash_mem to framebuffer_mem and change node
name to memory.

Changes in v3:
 - Add voltage range for vph_pwr
 - Move RESIN to PM660 and make PON keys disabled by default 
 - Addressed review comments from Konrad
 - Make Alexey Min the author of the USB patch as he came up with
the patch first on downstream. 

Alexey Min (1):
  arm64: dts: qcom: sdm660-xiaomi-lavender: Add USB

Dang Huynh (7):
  arm64: dts: qcom: sdm630: Assign numbers to eMMC and SD
  arm64: dts: qcom: sdm630-pm660: Move RESIN to pm660 dtsi
  arm64: dts: qcom: sdm660-xiaomi-lavender: Add RPM and fixed regulators
  arm64: dts: qcom: sdm660-xiaomi-lavender: Add PWRKEY and RESIN
  arm64: dts: qcom: sdm660-xiaomi-lavender: Add volume up button
  arm64: dts: qcom: sdm660-xiaomi-lavender: Add eMMC and SD
  arm64: dts: qcom: sdm660-xiaomi-lavender: Enable Simple Framebuffer

 arch/arm64/boot/dts/qcom/pm660.dtsi           |  12 +-
 .../dts/qcom/sdm630-sony-xperia-nile.dtsi     |  16 +-
 arch/arm64/boot/dts/qcom/sdm630.dtsi          |   5 +
 .../boot/dts/qcom/sdm660-xiaomi-lavender.dts  | 383 ++++++++++++++++++
 4 files changed, 407 insertions(+), 9 deletions(-)

-- 
2.33.1