Re: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated

[Hugues FRUCHET - FOSS]

Hi Mirela,

Thanks for patch, tested OK on my side:

Acked-by: Hugues Fruchet <hugues.fruchet@xxxxxx>
Tested-by: Hugues Fruchet <hugues.fruchet@xxxxxx>

BR,
Hugues.
> -----Original Message-----
> From: Mirela Rabulea (OSS) <mirela.rabulea@xxxxxxxxxxx>
> Sent: lundi 1 novembre 2021 20:53
> To: slongerbeam@xxxxxxxxx; mchehab@xxxxxxxxxx; Hugues FRUCHET <hugues.fruchet@xxxxxx>; jacopo+renesas@xxxxxxxxxx
> Cc: guoniu.zhou@xxxxxxx; manish.bajaj@xxxxxxx; robert.chiras@xxxxxxx; xavier.roumegue@xxxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; linux-imx@xxxxxxx; Mirela Rabulea <mirela.rabulea@xxxxxxx>
> Subject: [PATCH] media: ov5640: Fix set format, v4l2_mbus_pixelcode not updated
>
> From: Mirela Rabulea <mirela.rabulea@xxxxxxx>
>
> In ov5640_set_fmt, pending_fmt_change will always be false, because the sensor format is saved before comparing it with the previous format:
> 	fmt = &sensor->fmt;...
> 	*fmt = *mbus_fmt;...
> 	if (mbus_fmt->code != sensor->fmt.code)
> 		sensor->pending_fmt_change = true;
> This causes the sensor to capture with the previous pixelcode.
>
> Also, changes might happen even for V4L2_SUBDEV_FORMAT_TRY, so fix that.
>
> Basically, revert back to the state before commit 071154499193 ("media: ov5640: Fix set format regression") as it was more clear, and then update format even when pixelcode does not change, as resolution might change.
>
> Fixes: 071154499193 ("media: ov5640: Fix set format regression")
> Fixes: 6949d864776e ("media: ov5640: do not change mode if format or frame interval is unchanged")
> Fixes: fb98e29ff1ea5 ("media: ov5640: fix mode change regression")
>
> Signed-off-by: Mirela Rabulea <mirela.rabulea@xxxxxxx>
> ---
>   drivers/media/i2c/ov5640.c | 14 +++++++-------
>   1 file changed, 7 insertions(+), 7 deletions(-)
>
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index ddbd71394db3..db5a19babe67 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -2293,7 +2293,6 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>   	struct ov5640_dev *sensor = to_ov5640_dev(sd);
>   	const struct ov5640_mode_info *new_mode;
>   	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
> -	struct v4l2_mbus_framefmt *fmt;
>   	int ret;
>   
>   	if (format->pad != 0)
> @@ -2311,12 +2310,10 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>   	if (ret)
>   		goto out;
>   
> -	if (format->which == V4L2_SUBDEV_FORMAT_TRY)
> -		fmt = v4l2_subdev_get_try_format(sd, sd_state, 0);
> -	else
> -		fmt = &sensor->fmt;
> -
> -	*fmt = *mbus_fmt;
> +	if (format->which == V4L2_SUBDEV_FORMAT_TRY) {
> +		*v4l2_subdev_get_try_format(sd, sd_state, 0) = *mbus_fmt;
> +		goto out;
> +	}
>   
>   	if (new_mode != sensor->current_mode) {
>   		sensor->current_mode = new_mode;
> @@ -2325,6 +2322,9 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>   	if (mbus_fmt->code != sensor->fmt.code)
>   		sensor->pending_fmt_change = true;
>   
> +	/* update format even if code is unchanged, resolution might change */
> +	sensor->fmt = *mbus_fmt;
> +
>   	__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
>   				 ov5640_calc_pixel_rate(sensor));
>   out:
> --
> 2.25.1