[PATCH] mfd: intel_soc_pmic: Use CPU-id check instead of _HRV check to differentiate variants

From: Hans de Goede
Date: Sun Nov 07 2021 - 12:26:52 EST


The Intel Crystal Cove PMIC has 2 different variants, one for use with
Bay Trail (BYT) SoCs and one for use with Cherry Trail (CHT) SoCs.

So far we have been using an ACPI _HRV check to differentiate between
the 2, but at least on the Microsoft Surface 3, which is a CHT device,
the wrong _HRV value is reported by ACPI.

So instead switch to a CPU-ID check which avoids us relying on the
possibly wrong ACPI _HRV value.

Reported-by: Tsuchiya Yuto <kitakar@xxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/mfd/intel_soc_pmic_core.c | 28 +++-------------------------
1 file changed, 3 insertions(+), 25 deletions(-)

diff --git a/drivers/mfd/intel_soc_pmic_core.c b/drivers/mfd/intel_soc_pmic_core.c
index ddd64f9e3341..47cb7f00dfcf 100644
--- a/drivers/mfd/intel_soc_pmic_core.c
+++ b/drivers/mfd/intel_soc_pmic_core.c
@@ -14,15 +14,12 @@
#include <linux/module.h>
#include <linux/mfd/core.h>
#include <linux/mfd/intel_soc_pmic.h>
+#include <linux/platform_data/x86/soc.h>
#include <linux/pwm.h>
#include <linux/regmap.h>

#include "intel_soc_pmic_core.h"

-/* Crystal Cove PMIC shares same ACPI ID between different platforms */
-#define BYT_CRC_HRV 2
-#define CHT_CRC_HRV 3
-
/* PWM consumed by the Intel GFX */
static struct pwm_lookup crc_pwm_lookup[] = {
PWM_LOOKUP("crystal_cove_pwm", 0, "0000:00:02.0", "pwm_pmic_backlight", 0, PWM_POLARITY_NORMAL),
@@ -34,31 +31,12 @@ static int intel_soc_pmic_i2c_probe(struct i2c_client *i2c,
struct device *dev = &i2c->dev;
struct intel_soc_pmic_config *config;
struct intel_soc_pmic *pmic;
- unsigned long long hrv;
- acpi_status status;
int ret;

- /*
- * There are 2 different Crystal Cove PMICs a Bay Trail and Cherry
- * Trail version, use _HRV to differentiate between the 2.
- */
- status = acpi_evaluate_integer(ACPI_HANDLE(dev), "_HRV", NULL, &hrv);
- if (ACPI_FAILURE(status)) {
- dev_err(dev, "Failed to get PMIC hardware revision\n");
- return -ENODEV;
- }
-
- switch (hrv) {
- case BYT_CRC_HRV:
+ if (soc_intel_is_byt())
config = &intel_soc_pmic_config_byt_crc;
- break;
- case CHT_CRC_HRV:
+ else
config = &intel_soc_pmic_config_cht_crc;
- break;
- default:
- dev_warn(dev, "Unknown hardware rev %llu, assuming BYT\n", hrv);
- config = &intel_soc_pmic_config_byt_crc;
- }

pmic = devm_kzalloc(dev, sizeof(*pmic), GFP_KERNEL);
if (!pmic)
--
2.31.1