[PATCH 5.15 08/12] Revert "wcn36xx: Disable bmps when encryption is disabled"

From: Greg Kroah-Hartman
Date: Thu Nov 04 2021 - 10:14:25 EST


From: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>

commit 285bb1738e196507bf985574d0bc1e9dd72d46b1 upstream.

This reverts commit c6522a5076e1a65877c51cfee313a74ef61cabf8.

Testing on tip-of-tree shows that this is working now. Revert this and
re-enable BMPS for Open APs.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Signed-off-by: Kalle Valo <kvalo@xxxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20211022140447.2846248-3-bryan.odonoghue@xxxxxxxxxx
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/wireless/ath/wcn36xx/main.c | 10 ----------
drivers/net/wireless/ath/wcn36xx/pmc.c | 5 +----
drivers/net/wireless/ath/wcn36xx/wcn36xx.h | 1 -
3 files changed, 1 insertion(+), 15 deletions(-)

--- a/drivers/net/wireless/ath/wcn36xx/main.c
+++ b/drivers/net/wireless/ath/wcn36xx/main.c
@@ -604,15 +604,6 @@ static int wcn36xx_set_key(struct ieee80
}
}
}
- /* FIXME: Only enable bmps support when encryption is enabled.
- * For any reasons, when connected to open/no-security BSS,
- * the wcn36xx controller in bmps mode does not forward
- * 'wake-up' beacons despite AP sends DTIM with station AID.
- * It could be due to a firmware issue or to the way driver
- * configure the station.
- */
- if (vif->type == NL80211_IFTYPE_STATION)
- vif_priv->allow_bmps = true;
break;
case DISABLE_KEY:
if (!(IEEE80211_KEY_FLAG_PAIRWISE & key_conf->flags)) {
@@ -913,7 +904,6 @@ static void wcn36xx_bss_info_changed(str
vif->addr,
bss_conf->aid);
vif_priv->sta_assoc = false;
- vif_priv->allow_bmps = false;
wcn36xx_smd_set_link_st(wcn,
bss_conf->bssid,
vif->addr,
--- a/drivers/net/wireless/ath/wcn36xx/pmc.c
+++ b/drivers/net/wireless/ath/wcn36xx/pmc.c
@@ -23,10 +23,7 @@ int wcn36xx_pmc_enter_bmps_state(struct
{
int ret = 0;
struct wcn36xx_vif *vif_priv = wcn36xx_vif_to_priv(vif);
-
- if (!vif_priv->allow_bmps)
- return -ENOTSUPP;
-
+ /* TODO: Make sure the TX chain clean */
ret = wcn36xx_smd_enter_bmps(wcn, vif);
if (!ret) {
wcn36xx_dbg(WCN36XX_DBG_PMC, "Entered BMPS\n");
--- a/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
+++ b/drivers/net/wireless/ath/wcn36xx/wcn36xx.h
@@ -128,7 +128,6 @@ struct wcn36xx_vif {
enum wcn36xx_hal_bss_type bss_type;

/* Power management */
- bool allow_bmps;
enum wcn36xx_power_state pw_state;

u8 bss_index;