Re: [PATCH v3 1/2] dt-bindings: i2c-mux: Add property for settle time

From: Horatiu Vultur
Date: Tue Nov 02 2021 - 18:26:37 EST


The 11/02/2021 13:37, Rob Herring wrote:

Hi Rob,

>
> On Mon, Nov 01, 2021 at 10:32:01PM +0100, Horatiu Vultur wrote:
> > The 11/01/2021 15:32, Peter Rosin wrote:
> >
> > Hi Peter,
> >
> > >
> > > On 2021-11-01 13:25, Horatiu Vultur wrote:
> > > > Some HW requires some time for the signals to settle after the muxing is
> > > > changed. Allow this time to be specified in device tree.
> > > >
> > > > Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> > > > ---
> > > > Documentation/devicetree/bindings/i2c/i2c-mux.yaml | 6 ++++++
> > > > 1 file changed, 6 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > index 24cac36037f5..4628ff6340c1 100644
> > > > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > > > @@ -29,6 +29,12 @@ properties:
> > > > '#size-cells':
> > > > const: 0
> > > >
> > > > + settle-time-us:
> > > > + default: 0
> > > > + description:
> > > > + The time required for the signals to settle. Currently only the
> > > > + i2c-mux-gpmux driver supports this optional binding.
> > >
> > > The information about how i2c-mux-gpmux is special is bound to go stale,
> > > and I don't think we should mention such specific details in the binding.
> > > What I meant was a generic warnings about optional bindings perhaps not
> > > being supported by all drivers, along the lines of this from i2c.txt:
> > >
> > > "These properties may not be supported by all drivers. However, if a driver
> > > wants to support one of the below features, it should adapt these bindings."
> > >
> > > However, I now notice that this sentence makes no sense. It looks like it
> > > should be s/adapt/adopt/.
> > >
> > > And, in the i2c-mux.yaml case it can simply say "Optional properties"
> > > instead of "These properites" (which refers to a subset of properties
> > > immediately below the text) since with a yaml binding it is always
> > > clear which properties are optional and which are required. Lastly, I
> > > guess this warning belongs in the description.
> > >
> > > > +
> > > > patternProperties:
> > > > '^i2c@[0-9a-f]+$':
> > > > $ref: /schemas/i2c/i2c-controller.yaml
> > > >
> > >
> > > Since this is the first optional property, you now need to specify what
> > > properties are required, which is everything but settle-time-us. If you
> > > don't, all properties are required. Which is not what we want...
> > >
> > > Something like this should do it, I think:
> > >
> > > required:
> > > - compatible
> > > - '#address-cells'
> > > - '#size-cells'
> >
> > Thanks for a detail explanation but I am still struggling with these
> > bindings. Were you thinking to have something like this?
> >
> > ---
> > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > index 24cac36037f5..c9fde1bb0fea 100644
> > --- a/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > @@ -19,6 +19,9 @@ description: |+
> > populating the i2c child busses. If an 'i2c-mux' subnode is present, only
> > subnodes of this will be considered as i2c child busses.
> >
> > + Optional properties may not be supported by all drivers. However, if a driver
> > + wants to support one of the below features, it should adopt these bindings.
> > +
> > properties:
> > $nodename:
> > pattern: '^(i2c-?)?mux'
> > @@ -29,6 +32,11 @@ properties:
> > '#size-cells':
> > const: 0
> >
> > + settle-time-us:
> > + default: 0
> > + description:
> > + The time required for the signals to settle.
> > +
> > patternProperties:
> > '^i2c@[0-9a-f]+$':
> > $ref: /schemas/i2c/i2c-controller.yaml
> > @@ -41,6 +49,11 @@ patternProperties:
> >
> > additionalProperties: true
> >
> > +required:
> > + - compatible
>
> compatible should not be required here.
>
> > + - '#address-cells'
> > + - '#size-cells'
> > +
> > examples:
> > - |
> > /*
> > ---
> >
> > If I have this then my problem is with the required properties because then I
> > start to get new warnings once I run:
> >
> > make ARCH=arm CROSS_COMPILE=arm-linux- dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> >
> > For example, one of new the warnings is this:
> >
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: 'compatible' is a required property
> > From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: '#address-cells' is a required property
> > From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
> > /home/hvultur/linux/arch/arm/boot/dts/am335x-icev2.dt.yaml: mux-mii-hog: '#size-cells' is a required property
> > From schema: /home/hvultur/linux/Documentation/devicetree/bindings/i2c/i2c-mux.yaml
>
> This is because of the $nodename pattern being pretty lax and matches
> on mux-mii-hog by mistake. We have 2 options. Change the nodename
> pattern to '^(i2c-?)?mux(@.*)?$' or add 'select: false'. The former
> would still match on 'mux' or 'mux@.*' which might still have problems.
> For the latter, we just need to make sure all the i2c-mux schemas have a
> $ref to this schema. Also, with that change we'd stop checking 'i2c-mux'
> nodes that don't yet have a specific schema. That said, I do lean toward
> the latter option.

>From what I can see there are only two i2c-mux schemas and both of them
have a $ref to this schema [1][2]

[1] https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/i2c/i2c-mux-gpmux.yaml#L33
[2] https://elixir.bootlin.com/linux/latest/source/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.yaml#L16

>
> Rob

--
/Horatiu