[PATCH 3/9] Remove unused header <linux/cnt32_to_63.h>

From: Jonathan Corbet
Date: Tue Nov 02 2021 - 18:02:25 EST


Commit fb37409a01b0 ("arch: remove unicore32 port) deleted the last file
that included <linux/cnt32_to_63.h>, but left that header file behind.
Nothing uses it, delete it now.

Cc: Nicolas Pitre <npitre@xxxxxxxxxxxx>
Cc: Mike Rapoport <rppt@xxxxxxxxxx>
Cc: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Jonathan Corbet <corbet@xxxxxxx>
---
include/linux/cnt32_to_63.h | 104 ------------------------------------
1 file changed, 104 deletions(-)
delete mode 100644 include/linux/cnt32_to_63.h

diff --git a/include/linux/cnt32_to_63.h b/include/linux/cnt32_to_63.h
deleted file mode 100644
index 064428479f2d..000000000000
--- a/include/linux/cnt32_to_63.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Extend a 32-bit counter to 63 bits
- *
- * Author: Nicolas Pitre
- * Created: December 3, 2006
- * Copyright: MontaVista Software, Inc.
- */
-
-#ifndef __LINUX_CNT32_TO_63_H__
-#define __LINUX_CNT32_TO_63_H__
-
-#include <linux/compiler.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-/* this is used only to give gcc a clue about good code generation */
-union cnt32_to_63 {
- struct {
-#if defined(__LITTLE_ENDIAN)
- u32 lo, hi;
-#elif defined(__BIG_ENDIAN)
- u32 hi, lo;
-#endif
- };
- u64 val;
-};
-
-
-/**
- * cnt32_to_63 - Expand a 32-bit counter to a 63-bit counter
- * @cnt_lo: The low part of the counter
- *
- * Many hardware clock counters are only 32 bits wide and therefore have
- * a relatively short period making wrap-arounds rather frequent. This
- * is a problem when implementing sched_clock() for example, where a 64-bit
- * non-wrapping monotonic value is expected to be returned.
- *
- * To overcome that limitation, let's extend a 32-bit counter to 63 bits
- * in a completely lock free fashion. Bits 0 to 31 of the clock are provided
- * by the hardware while bits 32 to 62 are stored in memory. The top bit in
- * memory is used to synchronize with the hardware clock half-period. When
- * the top bit of both counters (hardware and in memory) differ then the
- * memory is updated with a new value, incrementing it when the hardware
- * counter wraps around.
- *
- * Because a word store in memory is atomic then the incremented value will
- * always be in synch with the top bit indicating to any potential concurrent
- * reader if the value in memory is up to date or not with regards to the
- * needed increment. And any race in updating the value in memory is harmless
- * as the same value would simply be stored more than once.
- *
- * The restrictions for the algorithm to work properly are:
- *
- * 1) this code must be called at least once per each half period of the
- * 32-bit counter;
- *
- * 2) this code must not be preempted for a duration longer than the
- * 32-bit counter half period minus the longest period between two
- * calls to this code;
- *
- * Those requirements ensure proper update to the state bit in memory.
- * This is usually not a problem in practice, but if it is then a kernel
- * timer should be scheduled to manage for this code to be executed often
- * enough.
- *
- * And finally:
- *
- * 3) the cnt_lo argument must be seen as a globally incrementing value,
- * meaning that it should be a direct reference to the counter data which
- * can be evaluated according to a specific ordering within the macro,
- * and not the result of a previous evaluation stored in a variable.
- *
- * For example, this is wrong:
- *
- * u32 partial = get_hw_count();
- * u64 full = cnt32_to_63(partial);
- * return full;
- *
- * This is fine:
- *
- * u64 full = cnt32_to_63(get_hw_count());
- * return full;
- *
- * Note that the top bit (bit 63) in the returned value should be considered
- * as garbage. It is not cleared here because callers are likely to use a
- * multiplier on the returned value which can get rid of the top bit
- * implicitly by making the multiplier even, therefore saving on a runtime
- * clear-bit instruction. Otherwise caller must remember to clear the top
- * bit explicitly.
- */
-#define cnt32_to_63(cnt_lo) \
-({ \
- static u32 __m_cnt_hi; \
- union cnt32_to_63 __x; \
- __x.hi = __m_cnt_hi; \
- smp_rmb(); \
- __x.lo = (cnt_lo); \
- if (unlikely((s32)(__x.hi ^ __x.lo) < 0)) \
- __m_cnt_hi = __x.hi = (__x.hi ^ 0x80000000) + (__x.hi >> 31); \
- __x.val; \
-})
-
-#endif
--
2.31.1