[PATCH 5.14 093/125] phy: phy_ethtool_ksettings_set: Move after phy_start_aneg

From: Greg Kroah-Hartman
Date: Mon Nov 01 2021 - 05:49:27 EST


From: Andrew Lunn <andrew@xxxxxxx>

commit 64cd92d5e8180c2ded3fdea76862de6f596ae2c9 upstream.

This allows it to make use of a helper which assume the PHY is already
locked.

Fixes: 2d55173e71b0 ("phy: add generic function to support ksetting support")
Signed-off-by: Andrew Lunn <andrew@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/phy/phy.c | 106 +++++++++++++++++++++++++-------------------------
1 file changed, 53 insertions(+), 53 deletions(-)

--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -243,59 +243,6 @@ static void phy_sanitize_settings(struct
}
}

-int phy_ethtool_ksettings_set(struct phy_device *phydev,
- const struct ethtool_link_ksettings *cmd)
-{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
- u8 autoneg = cmd->base.autoneg;
- u8 duplex = cmd->base.duplex;
- u32 speed = cmd->base.speed;
-
- if (cmd->base.phy_address != phydev->mdio.addr)
- return -EINVAL;
-
- linkmode_copy(advertising, cmd->link_modes.advertising);
-
- /* We make sure that we don't pass unsupported values in to the PHY */
- linkmode_and(advertising, advertising, phydev->supported);
-
- /* Verify the settings we care about. */
- if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
- return -EINVAL;
-
- if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
- return -EINVAL;
-
- if (autoneg == AUTONEG_DISABLE &&
- ((speed != SPEED_1000 &&
- speed != SPEED_100 &&
- speed != SPEED_10) ||
- (duplex != DUPLEX_HALF &&
- duplex != DUPLEX_FULL)))
- return -EINVAL;
-
- phydev->autoneg = autoneg;
-
- if (autoneg == AUTONEG_DISABLE) {
- phydev->speed = speed;
- phydev->duplex = duplex;
- }
-
- linkmode_copy(phydev->advertising, advertising);
-
- linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
- phydev->advertising, autoneg == AUTONEG_ENABLE);
-
- phydev->master_slave_set = cmd->base.master_slave_cfg;
- phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
-
- /* Restart the PHY */
- phy_start_aneg(phydev);
-
- return 0;
-}
-EXPORT_SYMBOL(phy_ethtool_ksettings_set);
-
void phy_ethtool_ksettings_get(struct phy_device *phydev,
struct ethtool_link_ksettings *cmd)
{
@@ -802,6 +749,59 @@ static int phy_poll_aneg_done(struct phy
return ret < 0 ? ret : 0;
}

+int phy_ethtool_ksettings_set(struct phy_device *phydev,
+ const struct ethtool_link_ksettings *cmd)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+ u8 autoneg = cmd->base.autoneg;
+ u8 duplex = cmd->base.duplex;
+ u32 speed = cmd->base.speed;
+
+ if (cmd->base.phy_address != phydev->mdio.addr)
+ return -EINVAL;
+
+ linkmode_copy(advertising, cmd->link_modes.advertising);
+
+ /* We make sure that we don't pass unsupported values in to the PHY */
+ linkmode_and(advertising, advertising, phydev->supported);
+
+ /* Verify the settings we care about. */
+ if (autoneg != AUTONEG_ENABLE && autoneg != AUTONEG_DISABLE)
+ return -EINVAL;
+
+ if (autoneg == AUTONEG_ENABLE && linkmode_empty(advertising))
+ return -EINVAL;
+
+ if (autoneg == AUTONEG_DISABLE &&
+ ((speed != SPEED_1000 &&
+ speed != SPEED_100 &&
+ speed != SPEED_10) ||
+ (duplex != DUPLEX_HALF &&
+ duplex != DUPLEX_FULL)))
+ return -EINVAL;
+
+ phydev->autoneg = autoneg;
+
+ if (autoneg == AUTONEG_DISABLE) {
+ phydev->speed = speed;
+ phydev->duplex = duplex;
+ }
+
+ linkmode_copy(phydev->advertising, advertising);
+
+ linkmode_mod_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ phydev->advertising, autoneg == AUTONEG_ENABLE);
+
+ phydev->master_slave_set = cmd->base.master_slave_cfg;
+ phydev->mdix_ctrl = cmd->base.eth_tp_mdix_ctrl;
+
+ /* Restart the PHY */
+ phy_start_aneg(phydev);
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_ethtool_ksettings_set);
+
/**
* phy_speed_down - set speed to lowest speed supported by both link partners
* @phydev: the phy_device struct