[PATCH v3 6/6] drm/msm/dp: Remove the hpd init delay for eDP

[Sankeerth Billakanti]

DP driver needs a 10 second delay before phy_init so that
the usb combo phy initializes and sets up the necessary
clocks for usb devices such as keyboard and mouse.

eDP controller uses a standalone phy and need not wait for
phy initialization from any other component. This change
will remove the delay for eDP controller.

Signed-off-by: Sankeerth Billakanti <quic_sbillaka@xxxxxxxxxxx>
---
 drivers/gpu/drm/msm/dp/dp_display.c | 11 ++++++++++-
 1 file changed, 10 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 61385d6..de6a1fd 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -1430,6 +1430,7 @@ void __exit msm_dp_unregister(void)
 void msm_dp_irq_postinstall(struct msm_dp *dp_display)
 {
 	struct dp_display_private *dp;
+	u8 delay;
 
 	if (!dp_display)
 		return;
@@ -1438,7 +1439,15 @@ void msm_dp_irq_postinstall(struct msm_dp *dp_display)
 
 	dp_hpd_event_setup(dp);
 
-	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, 100);
+	if (dp->dp_display.connector_type == DRM_MODE_CONNECTOR_eDP) {
+		/* eDP does not need any delay before phy init */
+		delay = 0;
+	} else {
+		/* DP needs 10 second delay to let usb combo phy initialize */
+		delay = 100;
+	}
+
+	dp_add_event(dp, EV_HPD_INIT_SETUP, 0, delay);
 }
 
 void msm_dp_debugfs_init(struct msm_dp *dp_display, struct drm_minor *minor)
-- 
2.7.4