RE: [RESEND v2 4/5] PCI: imx6: Fix the clock reference handling unbalance when link never came up

[Richard Zhu]

<snipped ...>
> >
> > > > -static void imx6_pcie_clk_disable(struct imx6_pcie *imx6_pcie) -{
> > > > -	clk_disable_unprepare(imx6_pcie->pcie);
> > > > -	clk_disable_unprepare(imx6_pcie->pcie_phy);
> > > > -	clk_disable_unprepare(imx6_pcie->pcie_bus);
> > > > -
> > > > -	switch (imx6_pcie->drvdata->variant) {
> > > > -	case IMX6SX:
> > > > -		clk_disable_unprepare(imx6_pcie->pcie_inbound_axi);
> > > > -		break;
> > > > -	case IMX7D:
> > > > -		regmap_update_bits(imx6_pcie->iomuxc_gpr,
> IOMUXC_GPR12,
> > > > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL,
> > > > -				   IMX7D_GPR12_PCIE_PHY_REFCLK_SEL);
> > > > -		break;
> > > > -	case IMX8MQ:
> > > > -		clk_disable_unprepare(imx6_pcie->pcie_aux);
> > > > -		break;
> > > > -	default:
> > > > -		break;
> >
> > While you're at it, this "default: break;" thing is pointless.
> > Normally it's better to just *move* something without changing it at
> > all, but this is such a simple thing I think you could drop this at
> > the same time as the move.
> >
> [Richard Zhu] Okay, got that. Would remove the "default:break" later. Thanks.
[Richard Zhu] I figure out that the default:break is required by IMX6Q/IMX6QP.
 So I just don't drop them in v3 patch-set.

> 
> Best Regards
> Richard Zhu
> 
> > > > -	}
> > > > -}