Re: [PATCH] WIP: dt-bindings: arm: hwmon: gpio-fan: Convert txt bindings to yaml

[Rob Herring]

On Sat, Oct 09, 2021 at 12:43:09PM +0200, David Heidelberg wrote:
> Convert fan devices connected to GPIOs to the YAML syntax.
> 
> Signed-off-by: David Heidelberg <david@xxxxxxx>
> ---
>  .../devicetree/bindings/hwmon/gpio-fan.txt    | 41 -----------
>  .../devicetree/bindings/hwmon/gpio-fan.yaml   | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 41 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.txt
>  create mode 100644 Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt b/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> deleted file mode 100644
> index f4cfa350f6a1..000000000000
> --- a/Documentation/devicetree/bindings/hwmon/gpio-fan.txt
> +++ /dev/null
> @@ -1,41 +0,0 @@
> -Bindings for fan connected to GPIO lines
> -
> -Required properties:
> -- compatible : "gpio-fan"
> -
> -Optional properties:
> -- gpios: Specifies the pins that map to bits in the control value,
> -  ordered MSB-->LSB.
> -- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the
> -  control value that should be set to achieve them. This array
> -  must have the RPM values in ascending order.
> -- alarm-gpios: This pin going active indicates something is wrong with
> -  the fan, and a udev event will be fired.
> -- #cooling-cells: If used as a cooling device, must be <2>
> -  Also see:
> -  Documentation/devicetree/bindings/thermal/thermal-cooling-devices.yaml
> -  min and max states are derived from the speed-map of the fan.
> -
> -Note: At least one the "gpios" or "alarm-gpios" properties must be set.
> -
> -Examples:
> -
> -	gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio1 14 1
> -			 &gpio1 13 1>;
> -		gpio-fan,speed-map = <0    0
> -				      3000 1
> -				      6000 2>;
> -		alarm-gpios = <&gpio1 15 1>;
> -	};
> -	gpio_fan_cool: gpio_fan {
> -		compatible = "gpio-fan";
> -		gpios = <&gpio2 14 1
> -			 &gpio2 13 1>;
> -		gpio-fan,speed-map =	<0    0>,
> -					<3000 1>,
> -					<6000 2>;
> -		alarm-gpios = <&gpio2 15 1>;
> -		#cooling-cells = <2>; /* min followed by max */
> -	};
> diff --git a/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> new file mode 100644
> index 000000000000..e2db65d58a92
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/hwmon/gpio-fan.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/hwmon/gpio-fan.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Bindings for fan connected to GPIO lines
> +
> +maintainers:
> +  - Rob Herring <robh+dt@xxxxxxxxxx>

Just robh@xxxxxxxxxx

> +
> +properties:
> +  compatible:
> +    const: gpio-fan
> +
> +  gpios:
> +    description: |
> +      Specifies the pins that map to bits in the control value,
> +      ordered MSB-->LSB.

minItems: 1
maxItems: 7 ?

> +
> +  gpio-fan,speed-map:
> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    minItems: 4
> +    maxItems: 254
> +    description: |
> +      A mapping of possible fan RPM speeds and the
> +      control value that should be set to achieve them. This array
> +      must have the RPM values in ascending order.

Really this should be a uint32-matrix with this schema:

items:
  minItems: 2
  maxItems: 127
  items:
    - description: fan speed in RPMs
    - description: control value

> +
> +  alarm-gpios:
> +    description: |
> +      This pin going active indicates something is wrong with
> +      the fan, and a udev event will be fired.

maxItems: 1

udev is a linuxism and shouldn't be in the binding.

> +
> +  '#cooling-cells':
> +    const: 2
> +
> +required:
> +  - compatible
> +  - gpio-fan,speed-map
> +
> +anyOf:
> +  - required: [gpios]

How is 'gpios' not always required?

> +  - required: [alarm-gpios]
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    gpio_fan {
> +      compatible = "gpio-fan";
> +      gpios = <&gpio1 14 1
> +               &gpio1 13 1>;
> +      gpio-fan,speed-map = <0    0
> +                            3000 1
> +                            6000 2>;

Brackets needed around each pair.

> +      alarm-gpios = <&gpio1 15 1>;
> +    };
> +  - |
> +    gpio_fan_cool: gpio_fan {
> +      compatible = "gpio-fan";
> +      gpios = <&gpio2 14 1
> +               &gpio2 13 1>;
> +      gpio-fan,speed-map = <0    0
> +                            3000 1
> +                            6000 2>;
> +      alarm-gpios = <&gpio2 15 1>;
> +      #cooling-cells = <2>; /* min followed by max */
> +    };
> -- 
> 2.33.0
> 
>