Re: [PATCH v3 6/9] dt-bindings: imx6q-pcie: Add PHY phandles and name properties

[Rob Herring]

On Tue, Oct 12, 2021 at 04:41:15PM +0800, Richard Zhu wrote:
> i.MX8MM PCIe has the PHY. Add a PHY phandle and name properties
> in the binding document.
> 
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> index 2911e565b260..99d9863a69cd 100644
> --- a/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> +++ b/Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.yaml
> @@ -128,6 +128,12 @@ properties:
>      enum: [1, 2, 3, 4]
>      default: 1
>  
> +  phys:
> +    description: Phandle of the Generic PHY to the PCIe PHY.

maxItems: 1

And drop 'description'

> +
> +  phy-names:
> +    const: pcie-phy
> +
>    reset-gpio:
>      description: Should specify the GPIO for controlling the PCI bus device
>        reset signal. It's not polarity aware and defaults to active-low reset
> -- 
> 2.25.1
> 
>