[PATCH net] net: dsa: mt7530: correct ds->num_ports

[DENG Qingfang]

Setting ds->num_ports to DSA_MAX_PORTS made DSA core allocate unnecessary
dsa_port's and call mt7530_port_disable for non-existent ports.

Set it to MT7530_NUM_PORTS to fix that, and dsa_is_user_port check in
port_enable/disable is no longer required.

Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: DENG Qingfang <dqfext@xxxxxxxxx>
---
 drivers/net/dsa/mt7530.c | 8 +-------
 1 file changed, 1 insertion(+), 7 deletions(-)

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index a3b49abd32f1..dbd15da977b5 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -1035,9 +1035,6 @@ mt7530_port_enable(struct dsa_switch *ds, int port,
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return 0;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Allow the user port gets connected to the cpu port and also
@@ -1060,9 +1057,6 @@ mt7530_port_disable(struct dsa_switch *ds, int port)
 {
 	struct mt7530_priv *priv = ds->priv;
 
-	if (!dsa_is_user_port(ds, port))
-		return;
-
 	mutex_lock(&priv->reg_mutex);
 
 	/* Clear up all port matrix which could be restored in the next
@@ -3265,7 +3259,7 @@ mt7530_probe(struct mdio_device *mdiodev)
 		return -ENOMEM;
 
 	priv->ds->dev = &mdiodev->dev;
-	priv->ds->num_ports = DSA_MAX_PORTS;
+	priv->ds->num_ports = MT7530_NUM_PORTS;
 
 	/* Use medatek,mcm property to distinguish hardware type that would
 	 * casues a little bit differences on power-on sequence.
-- 
2.25.1