[PATCH v2 00/11] Initial Fairphone 4 support

[Luca Weiss]

This series adds basic support for the recently announced Fairphone 4
smartphone, based on the Snapdragon 750G (sm7225).

This adds support for UART, power & volume buttons, screen based on
simple-framebuffer, regulators and USB.

v2 fixes some stylistic problems in dts and corrects the situation with
pm6350 regulator supplies.

Luca Weiss (11):
  clk: qcom: add select QCOM_GDSC for SM6350
  dt-bindings: regulator: qcom,rpmh: Add compatible for PM6350
  regulator: qcom-rpmh: Add PM6350 regulators
  dt-bindings: pinctrl: qcom,pmic-gpio: Add compatible for PM6350
  pinctrl: qcom: spmi-gpio: Add compatible for PM6350
  arm64: dts: qcom: Add PM6350 PMIC
  arm64: dts: qcom: sm6350: add debug uart
  dt-bindings: arm: cpus: Add Kryo 570 CPUs
  dt-bindings: arm: qcom: Document sm7225 and fairphone,fp4 board
  arm64: dts: qcom: Add SM7225 device tree
  arm64: dts: qcom: sm7225: Add device tree for Fairphone 4

 .../devicetree/bindings/arm/cpus.yaml         |   1 +
 .../devicetree/bindings/arm/qcom.yaml         |   6 +
 .../bindings/pinctrl/qcom,pmic-gpio.yaml      |   2 +
 .../regulator/qcom,rpmh-regulator.yaml        |   2 +
 arch/arm64/boot/dts/qcom/Makefile             |   1 +
 arch/arm64/boot/dts/qcom/pm6350.dtsi          |  54 +++
 arch/arm64/boot/dts/qcom/sm6350.dtsi          |  31 ++
 .../boot/dts/qcom/sm7225-fairphone-fp4.dts    | 320 ++++++++++++++++++
 arch/arm64/boot/dts/qcom/sm7225.dtsi          |  16 +
 drivers/clk/qcom/Kconfig                      |   1 +
 drivers/pinctrl/qcom/pinctrl-spmi-gpio.c      |   1 +
 drivers/regulator/qcom-rpmh-regulator.c       |  32 ++
 12 files changed, 467 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm6350.dtsi
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
 create mode 100644 arch/arm64/boot/dts/qcom/sm7225.dtsi

-- 
2.33.0