[PATCH v4 net-next 00/10] net: dsa: microchip: DSA driver support for LAN937x switch

From: Prasanna Vengateshan
Date: Thu Oct 07 2021 - 11:12:22 EST


LAN937x is a Multi-Port 100BASE-T1 Ethernet Physical Layer switch
compliant with the IEEE 802.3bw-2015 specification. The device
provides 100 Mbit/s transmit and receive capability over a single
Unshielded Twisted Pair (UTP) cable. LAN937x is successive revision
of KSZ series switch. This series of patches provide the DSA driver
support for Microchip LAN937X switch and it configures through
SPI interface.

This driver shares some of the functions from KSZ common
layer.

The LAN937x switch series family consists of following SKUs:

LAN9370:
- 4 T1 Phys
- 1 RGMII port

LAN9371:
- 3 T1 Phys & 1 TX Phy
- 2 RGMII ports

LAN9372:
- 5 T1 Phys & 1 TX Phy
- 2 RGMII ports

LAN9373:
- 5 T1 Phys
- 2 RGMII & 1 SGMII port

LAN9374:
- 6 T1 Phys
- 2 RGMII ports

More support will be added at a later stage.

Changes in v4:
- tag_ksz.c: cpu_to_be16 to put_unaligned_be16
- correct spacing in comments
- tag_ksz.c: NETIF_F_HW_CSUM fix is integrated
- lan937x_dev.c: mdio_np is removed from global and handled locally
- lan937x_dev.c: unused functions removed lan937x_cfg32 & lan937x_port_cfg32
- lan937x_dev.c: lan937x_is_internal_100BTX_phy_port function name changes
- lan937x_dev.c: RGMII internal delay handling for MAC. Delay values are
retrieved from DTS and updated
- lan937x_dev.c: corrected mutex operations for few dev variables
- microchip,lan937x.yaml: introduced rx-internal-delay-ps &
tx-internal-delay-ps for RGMII internal delay
- lan937x_dev.c: Unnecessary mutex_lock has been removed
- lan937x_main.c: PHY_INTERFACE_MODE_NA handling for lan937x_phylink_validate
- lan937x_main.c: PORT_MIRROR_SNIFFER check in right place
- lan937x_main.c: memset is used instead of writing 0's individually in
lan937x_port_fdb_add function
- lan937x_main.c: Removed \n from NL_SET_ERR_MSG_MOD calls

Changes in v3:
- Removed settings of cnt_ptr to zero and the memset()
added a cleanup patch which moves this into ksz_init_mib_timer().
- Used ret everywhere instead of rc
- microchip,lan937x.yaml: Remove mdio compatible
- microchip_t1.c: Renaming standard phy registers
- tag_ksz.c: LAN937X_TAIL_TAG_OVERRIDE renaming
LAN937X_TAIL_TAG_BLOCKING_OVERRIDE
- tag_ksz.c: Changed Ingress and Egress naming convention based on
Host
- tag_ksz.c: converted to skb_mac_header(skb) from
(is_link_local_ether_addr(hdr->h_dest))
- lan937x_dev.c: Removed BCAST Storm protection settings since we
have Tc commands for them
- lan937x_dev.c: Flow control setting in lan937x_port_setup function
- lan937x_dev.c: RGMII internal delay added only for cpu port,
- lan937x_dev.c: of_get_compatible_child(node,
"microchip,lan937x-mdio") to of_get_child_by_name(node, "mdio");
- lan937x_dev.c:lan937x_get_interface API: returned
PHY_INTERFACE_MODE_INTERNAL instead of PHY_INTERFACE_MODE_NA
- lan937x_main.c: Removed compat interface implementation in
lan937x_config_cpu_port() API & dev_info corrected as well
- lan937x_main.c: deleted ds->configure_vlan_while_not_filtering
= true
- lan937x_main.c: Added explanation for lan937x_setup lines
- lan937x_main.c: FR_MAX_SIZE correction in lan937x_get_max_mtu API
- lan937x_main.c: removed lan937x_port_bridge_flags dummy functions
- lan937x_spi.c - mdiobus_unregister to be added to spi_remove
function
- lan937x_main.c: phy link layer changes
- lan937x_main.c: port mirroring: sniff port selection limiting to
one port
- lan937x_main.c: Changed to global vlan filtering
- lan937x_main.c: vlan_table array to structure
- lan937x_main.c -Use extack instead of reporting errors to Console
- lan937x_main.c - Remove cpu_port addition in vlan_add api
- lan937x_main.c - removed pvid resetting

Changes in v2:
- return check for register read/writes
- dt compatible compatible check is added against chip id value
- lan937x_internal_t1_tx_phy_write() is renamed to
lan937x_internal_phy_write()
- lan937x_is_internal_tx_phy_port is renamed to
lan937x_is_internal_100BTX_phy_port as it is 100Base-Tx phy
- Return value for lan937x_internal_phy_write() is -EOPNOTSUPP
in case of failures
- Return value for lan937x_internal_phy_read() is 0xffff
for non existent phy
- cpu_port checking is removed from lan937x_port_stp_state_set()
- lan937x_phy_link_validate: 100baseT_Full to 100baseT1_Full
- T1 Phy driver is moved to drivers/net/phy/microchip_t1.c
- Tx phy driver support will be added later
- Legacy switch checkings in dts file are removed.
- tag_ksz.c: Re-used ksz9477_rcv for lan937x_rcv
- tag_ksz.c: Xmit() & rcv() Comments are corrected w.r.to host
- net/dsa/Kconfig: Family skew numbers altered in ascending order
- microchip,lan937x.yaml: eth is replaced with ethernet
- microchip,lan937x.yaml: spi1 is replaced with spi
- microchip,lan937x.yaml: cpu labelling is removed
- microchip,lan937x.yaml: port@x value will match the reg value now

Prasanna Vengateshan (10):
dt-bindings: net: dsa: dt bindings for microchip lan937x
net: dsa: move mib->cnt_ptr reset code to ksz_common.c
net: phy: Add support for LAN937x T1 phy driver
net: dsa: tag_ksz: add tag handling for Microchip LAN937x
net: dsa: microchip: add DSA support for microchip lan937x
net: dsa: microchip: add support for phylink management
net: dsa: microchip: add support for ethtool port counters
net: dsa: microchip: add support for port mirror operations
net: dsa: microchip: add support for fdb and mdb management
net: dsa: microchip: add support for vlan operations

.../bindings/net/dsa/microchip,lan937x.yaml | 160 ++
MAINTAINERS | 1 +
drivers/net/dsa/microchip/Kconfig | 12 +
drivers/net/dsa/microchip/Makefile | 5 +
drivers/net/dsa/microchip/ksz8795.c | 2 -
drivers/net/dsa/microchip/ksz9477.c | 3 -
drivers/net/dsa/microchip/ksz_common.c | 8 +-
drivers/net/dsa/microchip/ksz_common.h | 5 +
drivers/net/dsa/microchip/lan937x_dev.c | 725 +++++++++
drivers/net/dsa/microchip/lan937x_dev.h | 80 +
drivers/net/dsa/microchip/lan937x_main.c | 1310 +++++++++++++++++
drivers/net/dsa/microchip/lan937x_reg.h | 683 +++++++++
drivers/net/dsa/microchip/lan937x_spi.c | 227 +++
drivers/net/phy/microchip_t1.c | 339 ++++-
include/net/dsa.h | 2 +
net/dsa/Kconfig | 4 +-
net/dsa/tag_ksz.c | 59 +
17 files changed, 3554 insertions(+), 71 deletions(-)
create mode 100644 Documentation/devicetree/bindings/net/dsa/microchip,lan937x.yaml
create mode 100644 drivers/net/dsa/microchip/lan937x_dev.c
create mode 100644 drivers/net/dsa/microchip/lan937x_dev.h
create mode 100644 drivers/net/dsa/microchip/lan937x_main.c
create mode 100644 drivers/net/dsa/microchip/lan937x_reg.h
create mode 100644 drivers/net/dsa/microchip/lan937x_spi.c

--
2.27.0