[PATCH v1 3/4] ASoC: Intel: bytcr_rt5640: use devm_clk_get_optional() for mclk

[Andy Shevchenko]

The devm_clk_get_optional() helper returns NULL when devm_clk_get()
returns -ENOENT. This makes things slightly cleaner. The added benefit
is mostly cosmetic.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
---
 sound/soc/intel/boards/bytcr_rt5640.c | 75 ++++++++++++---------------
 1 file changed, 32 insertions(+), 43 deletions(-)

diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c
index 0f609a0b3527..2e7d45f0f05d 100644
--- a/sound/soc/intel/boards/bytcr_rt5640.c
+++ b/sound/soc/intel/boards/bytcr_rt5640.c
@@ -269,13 +269,10 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 		return -EIO;
 
 	if (SND_SOC_DAPM_EVENT_ON(event)) {
-		if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
-			ret = clk_prepare_enable(priv->mclk);
-			if (ret < 0) {
-				dev_err(card->dev,
-					"could not configure MCLK state\n");
-				return ret;
-			}
+		ret = clk_prepare_enable(priv->mclk);
+		if (ret < 0) {
+			dev_err(card->dev, "could not configure MCLK state\n");
+			return ret;
 		}
 		ret = byt_rt5640_prepare_and_enable_pll1(codec_dai, 48000);
 	} else {
@@ -287,10 +284,8 @@ static int platform_clock_control(struct snd_soc_dapm_widget *w,
 		ret = snd_soc_dai_set_sysclk(codec_dai, RT5640_SCLK_S_RCCLK,
 					     48000 * 512,
 					     SND_SOC_CLOCK_IN);
-		if (!ret) {
-			if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN)
-				clk_disable_unprepare(priv->mclk);
-		}
+		if (!ret)
+			clk_disable_unprepare(priv->mclk);
 	}
 
 	if (ret < 0) {
@@ -1217,30 +1212,25 @@ static int byt_rt5640_init(struct snd_soc_pcm_runtime *runtime)
 			return ret;
 	}
 
-	if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
-		/*
-		 * The firmware might enable the clock at
-		 * boot (this information may or may not
-		 * be reflected in the enable clock register).
-		 * To change the rate we must disable the clock
-		 * first to cover these cases. Due to common
-		 * clock framework restrictions that do not allow
-		 * to disable a clock that has not been enabled,
-		 * we need to enable the clock first.
-		 */
-		ret = clk_prepare_enable(priv->mclk);
-		if (!ret)
-			clk_disable_unprepare(priv->mclk);
-
-		if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
-			ret = clk_set_rate(priv->mclk, 25000000);
-		else
-			ret = clk_set_rate(priv->mclk, 19200000);
+	/*
+	 * The firmware might enable the clock at boot (this information
+	 * may or may not be reflected in the enable clock register).
+	 * To change the rate we must disable the clock first to cover
+	 * these cases. Due to common clock framework restrictions that
+	 * do not allow to disable a clock that has not been enabled,
+	 * we need to enable the clock first.
+	 */
+	ret = clk_prepare_enable(priv->mclk);
+	if (!ret)
+		clk_disable_unprepare(priv->mclk);
 
-		if (ret) {
-			dev_err(card->dev, "unable to set MCLK rate\n");
-			return ret;
-		}
+	if (byt_rt5640_quirk & BYT_RT5640_MCLK_25MHZ)
+		ret = clk_set_rate(priv->mclk, 25000000);
+	else
+		ret = clk_set_rate(priv->mclk, 19200000);
+	if (ret) {
+		dev_err(card->dev, "unable to set MCLK rate\n");
+		return ret;
 	}
 
 	if (BYT_RT5640_JDSRC(byt_rt5640_quirk)) {
@@ -1653,7 +1643,7 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 		byt_rt5640_dais[dai_index].cpus->dai_name = "ssp0-port";
 
 	if (byt_rt5640_quirk & BYT_RT5640_MCLK_EN) {
-		priv->mclk = devm_clk_get(dev, "pmc_plt_clk_3");
+		priv->mclk = devm_clk_get_optional(dev, "pmc_plt_clk_3");
 		if (IS_ERR(priv->mclk)) {
 			ret_val = PTR_ERR(priv->mclk);
 
@@ -1661,15 +1651,14 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev)
 				"Failed to get MCLK from pmc_plt_clk_3: %d\n",
 				ret_val);
 
-			/*
-			 * Fall back to bit clock usage for -ENOENT (clock not
-			 * available likely due to missing dependencies), bail
-			 * for all other errors, including -EPROBE_DEFER
-			 */
-			if (ret_val != -ENOENT)
-				goto err;
-			byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
+			goto err;
 		}
+		/*
+		 * Fall back to bit clock usage when clock is not
+		 * available likely due to missing dependencies.
+		 */
+		if (!priv->mclk)
+			byt_rt5640_quirk &= ~BYT_RT5640_MCLK_EN;
 	}
 
 	if (byt_rt5640_quirk & BYT_RT5640_NO_SPEAKERS) {
-- 
2.33.0