Re: [PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema

From: Rob Herring
Date: Mon Oct 04 2021 - 10:41:07 EST

Next message: Tvrtko Ursulin: "[RFC v2 0/8] CPU + GPU synchronised priority scheduling"
Previous message: Tvrtko Ursulin: "[RFC 7/8] drm/i915: Inherit process nice for context scheduling priority"
In reply to: Krzysztof Kozlowski: "[PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Fri, Oct 01, 2021 at 11:41:02AM +0200, Krzysztof Kozlowski wrote:
> Convert the regulators of Samsung S5M8767 PMIC to DT schema format.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> ---
> .../bindings/regulator/samsung,s5m8767.txt | 140 ------------------
> .../bindings/regulator/samsung,s5m8767.yaml | 83 +++++++++++
> MAINTAINERS | 2 +-
> 3 files changed, 84 insertions(+), 141 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> create mode 100644 Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
>
> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> deleted file mode 100644
> index 6cd83d920155..000000000000
> --- a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.txt
> +++ /dev/null
> @@ -1,140 +0,0 @@
> -Binding for Samsung S5M8767 regulator block
> -===========================================
> -
> -This is a part of device tree bindings for S5M family multi-function devices.
> -More information can be found in bindings/mfd/sec-core.txt file.
> -
> -The S5M8767 device provide buck and LDO regulators.
> -
> -To register these with regulator framework instantiate under main device node
> -a sub-node named "regulators" with more sub-nodes for each regulator using the
> -common regulator binding documented in:
> - - Documentation/devicetree/bindings/regulator/regulator.txt
> -
> -
> -Required properties of the main device node (the parent!):
> - - s5m8767,pmic-buck-ds-gpios: GPIO specifiers for three host gpio's used
> - for selecting GPIO DVS lines. It is one-to-one mapped to dvs gpio lines.
> -
> - [1] If either of the 's5m8767,pmic-buck[2/3/4]-uses-gpio-dvs' optional
> - property is specified, then all the eight voltage values for the
> - 's5m8767,pmic-buck[2/3/4]-dvs-voltage' should be specified.
> -
> -Optional properties of the main device node (the parent!):
> - - s5m8767,pmic-buck2-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck2 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> - - s5m8767,pmic-buck3-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck3 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> - - s5m8767,pmic-buck4-dvs-voltage: A set of 8 voltage values in micro-volt (uV)
> - units for buck4 when changing voltage using gpio dvs. Refer to [1] below
> - for additional information.
> -
> - - s5m8767,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
> - - s5m8767,pmic-buck3-uses-gpio-dvs: 'buck3' can be controlled by gpio dvs.
> - - s5m8767,pmic-buck4-uses-gpio-dvs: 'buck4' can be controlled by gpio dvs.
> -
> -Additional properties required if either of the optional properties are used:
> -
> - - s5m8767,pmic-buck-default-dvs-idx: Default voltage setting selected from
> - the possible 8 options selectable by the dvs gpios. The value of this
> - property should be between 0 and 7. If not specified or if out of range, the
> - default value of this property is set to 0.
> -
> - - s5m8767,pmic-buck-dvs-gpios: GPIO specifiers for three host gpio's used
> - for dvs. The format of the gpio specifier depends in the gpio controller.
> -
> -
> -Names of regulators supported by S5M8767 device:
> - - LDOn
> - - valid values for n are 1 to 28
> - - Example: LDO1, LDO2, LDO28
> - - BUCKn
> - - valid values for n are 1 to 9.
> - - Example: BUCK1, BUCK2, BUCK9
> -Note: The 'n' in LDOn and BUCKn represents the LDO or BUCK number
> -as per the datasheet of device.
> -
> -
> -Optional properties of the nodes under "regulators" sub-node:
> - - op_mode: describes the different operating modes of the LDO's with
> - power mode change in SOC. The different possible values are,
> - 0 - always off mode
> - 1 - on in normal mode
> - 2 - low power mode
> - 3 - suspend mode
> - - s5m8767,pmic-ext-control-gpios: (optional) GPIO specifier for one
> - GPIO controlling this regulator
> - (enable/disable); This is valid only
> - for buck9.
> -
> -Example:
> -
> - s5m8767_pmic@66 {
> - compatible = "samsung,s5m8767-pmic";
> - reg = <0x66>;
> -
> - s5m8767,pmic-buck2-uses-gpio-dvs;
> - s5m8767,pmic-buck3-uses-gpio-dvs;
> - s5m8767,pmic-buck4-uses-gpio-dvs;
> -
> - s5m8767,pmic-buck-default-dvs-idx = <0>;
> -
> - s5m8767,pmic-buck-dvs-gpios = <&gpx0 0 0>, /* DVS1 */
> - <&gpx0 1 0>, /* DVS2 */
> - <&gpx0 2 0>; /* DVS3 */
> -
> - s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>, /* SET1 */
> - <&gpx2 4 0>, /* SET2 */
> - <&gpx2 5 0>; /* SET3 */
> -
> - s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
> - <1250000>, <1200000>,
> - <1150000>, <1100000>,
> - <1000000>, <950000>;
> -
> - s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
> - <1100000>, <1100000>,
> - <1000000>, <1000000>,
> - <1000000>, <1000000>;
> -
> - s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
> - <1200000>, <1200000>,
> - <1200000>, <1200000>,
> - <1200000>, <1200000>;
> -
> - regulators {
> - ldo1_reg: LDO1 {
> - regulator-name = "VDD_ABB_3.3V";
> - regulator-min-microvolt = <3300000>;
> - regulator-max-microvolt = <3300000>;
> - op_mode = <1>; /* Normal Mode */
> - };
> -
> - ldo2_reg: LDO2 {
> - regulator-name = "VDD_ALIVE_1.1V";
> - regulator-min-microvolt = <1100000>;
> - regulator-max-microvolt = <1100000>;
> - regulator-always-on;
> - };
> -
> - buck1_reg: BUCK1 {
> - regulator-name = "VDD_MIF_1.2V";
> - regulator-min-microvolt = <950000>;
> - regulator-max-microvolt = <1350000>;
> - regulator-always-on;
> - regulator-boot-on;
> - };
> -
> - vemmc_reg: BUCK9 {
> - regulator-name = "VMEM_VDD_2.8V";
> - regulator-min-microvolt = <2800000>;
> - regulator-max-microvolt = <2800000>;
> - op_mode = <3>; /* Standby Mode */
> - s5m8767,pmic-ext-control-gpios = <&gpk0 2 0>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
> new file mode 100644
> index 000000000000..3192a06b5ef9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/regulator/samsung,s5m8767.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/regulator/samsung,s5m8767.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung S5M8767 Power Management IC regulators
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
> +
> +description: |
> + This is a part of device tree bindings for S2M and S5M family of Power
> + Management IC (PMIC).
> +
> + The S5M8767 provides buck and LDO regulators.
> +
> + See also Documentation/devicetree/bindings/mfd/samsung,s5m8767.yaml for
> + additional information and example.
> +
> +patternProperties:
> + # 28 LDOs
> + "^LDO([1-9]|1[0-9]|2[0-8])$":
> + type: object
> + $ref: regulator.yaml#
> + description:
> + Properties for single LDO regulator.
> +
> + properties:
> + regulator-name: true

This is fine, but technically it is not needed. There's not any
requirement that items in 'required' be listed under 'properties'.

> +
> + op_mode:

Needs a type reference.

> + enum: [0, 1, 2, 3]
> + default: 1
> + description: |
> + Describes the different operating modes of the LDO's with power mode
> + change in SOC. The different possible values are:
> + 0 - always off mode
> + 1 - on in normal mode
> + 2 - low power mode
> + 3 - suspend mode
> +
> + required:
> + - regulator-name
> +
> + unevaluatedProperties: false

On child nodes, I think it's better to place this up with the $ref and
'type: object' since the indentation can be hard to follow.

> +
> + # 8 bucks
> + "^BUCK[1-8]$":
> + type: object
> + $ref: regulator.yaml#
> + description:
> + Properties for single BUCK regulator.
> +
> + properties:
> + regulator-name: true
> +
> + required:
> + - regulator-name
> +
> + unevaluatedProperties: false
> +
> + # 9 buck
> + "^BUCK9$":
> + type: object
> + $ref: regulator.yaml#
> + description:
> + Properties for single BUCK regulator.
> +
> + properties:
> + regulator-name: true
> +
> + s5m8767,pmic-ext-control-gpios:
> + maxItems: 1
> + description: |
> + GPIO specifier for one GPIO controlling this regulator on/off.
> +
> + required:
> + - regulator-name
> +
> + unevaluatedProperties: false
> +
> +additionalProperties: false
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ee486357cf45..5a7cb990b182 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -16602,7 +16602,7 @@ S: Supported
> F: Documentation/devicetree/bindings/clock/samsung,s2mps11.yaml
> F: Documentation/devicetree/bindings/mfd/samsung,sec-core.txt
> F: Documentation/devicetree/bindings/regulator/samsung,s2m*.yaml
> -F: Documentation/devicetree/bindings/regulator/samsung,s5m*.txt
> +F: Documentation/devicetree/bindings/regulator/samsung,s5m*.yaml
> F: drivers/clk/clk-s2mps11.c
> F: drivers/mfd/sec*.c
> F: drivers/regulator/s2m*.c
> --
> 2.30.2
>
>

Next message: Tvrtko Ursulin: "[RFC v2 0/8] CPU + GPU synchronised priority scheduling"
Previous message: Tvrtko Ursulin: "[RFC 7/8] drm/i915: Inherit process nice for context scheduling priority"
In reply to: Krzysztof Kozlowski: "[PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema"
Next in thread: Krzysztof Kozlowski: "Re: [PATCH v2 06/10] regulator: dt-bindings: samsung,s5m8767: convert to dtschema"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]