[PATCH 5.10 39/93] net: enetc: fix the incorrect clearing of IF_MODE bits

[Greg Kroah-Hartman]

From: Vladimir Oltean <vladimir.oltean@xxxxxxx>

[ Upstream commit 325fd36ae76a6d089983b2d2eccb41237d35b221 ]

The enetc phylink .mac_config handler intends to clear the IFMODE field
(bits 1:0) of the PM0_IF_MODE register, but incorrectly clears all the
other fields instead.

For normal operation, the bug was inconsequential, due to the fact that
we write the PM0_IF_MODE register in two stages, first in
phylink .mac_config (which incorrectly cleared out a bunch of stuff),
then we update the speed and duplex to the correct values in
phylink .mac_link_up.

Judging by the code (not tested), it looks like maybe loopback mode was
broken, since this is one of the settings in PM0_IF_MODE which is
incorrectly cleared.

Fixes: c76a97218dcb ("net: enetc: force the RGMII speed and duplex instead of operating in inband mode")
Reported-by: Pavel Machek (CIP) <pavel@xxxxxxx>
Signed-off-by: Vladimir Oltean <vladimir.oltean@xxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 drivers/net/ethernet/freescale/enetc/enetc_pf.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.c b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
index 68133563a40c..716b396bf094 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.c
@@ -504,8 +504,7 @@ static void enetc_mac_config(struct enetc_hw *hw, phy_interface_t phy_mode)
 
 	if (phy_interface_mode_is_rgmii(phy_mode)) {
 		val = enetc_port_rd(hw, ENETC_PM0_IF_MODE);
-		val &= ~ENETC_PM0_IFM_EN_AUTO;
-		val &= ENETC_PM0_IFM_IFMODE_MASK;
+		val &= ~(ENETC_PM0_IFM_EN_AUTO | ENETC_PM0_IFM_IFMODE_MASK);
 		val |= ENETC_PM0_IFM_IFMODE_GMII | ENETC_PM0_IFM_RG;
 		enetc_port_wr(hw, ENETC_PM0_IF_MODE, val);
 	}
-- 
2.33.0