[PATCH 03/11] regulator: qcom-rpmh: Add PM6350 regulators

[Luca Weiss]

Add the configuration for pm6350 regulators. The supplies are not known
so use dummy ones for now.

Additionally leave out configuration of smps3 - smps5 and ldo17 as these
are not configured in the downstream kernel.

Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
---

If anybody has a datasheet for pm6350 lying around, please double check
if the configuration is correct, I'm relatively sure it is correct
though as the driver doesn't probe when e.g. pldo instead of nldo is
configured.

 drivers/regulator/qcom-rpmh-regulator.c | 32 +++++++++++++++++++++++++
 1 file changed, 32 insertions(+)

diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 7f458d510483..6ea111bccadb 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -1047,6 +1047,34 @@ static const struct rpmh_vreg_init_data pm6150l_vreg_data[] = {
 	{}
 };
 
+static const struct rpmh_vreg_init_data pm6350_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_ftsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps510, "vdd-s2"),
+	/* smps3 - smps5 not configured */
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_pldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_pldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo,      "vdd-l7"),
+	RPMH_VREG("ldo8",   "ldo%s8",  &pmic5_pldo,      "vdd-l8"),
+	RPMH_VREG("ldo9",   "ldo%s9",  &pmic5_pldo,      "vdd-l9"),
+	RPMH_VREG("ldo10",  "ldo%s10", &pmic5_pldo,      "vdd-l10"),
+	RPMH_VREG("ldo11",  "ldo%s11", &pmic5_pldo,      "vdd-l11"),
+	RPMH_VREG("ldo12",  "ldo%s12", &pmic5_pldo,      "vdd-l12"),
+	RPMH_VREG("ldo13",  "ldo%s13", &pmic5_nldo,      "vdd-l13"),
+	RPMH_VREG("ldo14",  "ldo%s14", &pmic5_pldo,      "vdd-l14"),
+	RPMH_VREG("ldo15",  "ldo%s15", &pmic5_nldo,      "vdd-l15"),
+	RPMH_VREG("ldo16",  "ldo%s16", &pmic5_nldo,      "vdd-l16"),
+	/* ldo17 not configured */
+	RPMH_VREG("ldo18",  "ldo%s18", &pmic5_nldo,      "vdd-l18"),
+	RPMH_VREG("ldo19",  "ldo%s19", &pmic5_nldo,      "vdd-l19"),
+	RPMH_VREG("ldo20",  "ldo%s20", &pmic5_nldo,      "vdd-l20"),
+	RPMH_VREG("ldo21",  "ldo%s21", &pmic5_nldo,      "vdd-l21"),
+	RPMH_VREG("ldo22",  "ldo%s22", &pmic5_nldo,      "vdd-l22"),
+};
+
 static const struct rpmh_vreg_init_data pmx55_vreg_data[] = {
 	RPMH_VREG("smps1",   "smp%s1",    &pmic5_ftsmps510, "vdd-s1"),
 	RPMH_VREG("smps2",   "smp%s2",    &pmic5_hfsmps510, "vdd-s2"),
@@ -1201,6 +1229,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.compatible = "qcom,pm6150l-rpmh-regulators",
 		.data = pm6150l_vreg_data,
 	},
+	{
+		.compatible = "qcom,pm6350-rpmh-regulators",
+		.data = pm6350_vreg_data,
+	},
 	{
 		.compatible = "qcom,pmc8180-rpmh-regulators",
 		.data = pm8150_vreg_data,
-- 
2.33.0