Re: [PATCH 1/3] dt-bindings: usb: qcom,dwc3: Add multi-pd bindings for dwc3 qcom

From: Sandeep Maheswaram
Date: Mon Sep 06 2021 - 05:16:00 EST



On 8/31/2021 1:37 AM, Doug Anderson wrote:
Hi,

On Mon, Aug 30, 2021 at 10:55 AM Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx> wrote:
Add multi pd bindings to set performance state for cx domain
to maintain minimum corner voltage for USB clocks.

Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/usb/qcom,dwc3.yaml | 13 ++++++++++++-
1 file changed, 12 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index e70afc4..838d9c4 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -41,7 +41,18 @@ properties:

power-domains:
description: specifies a phandle to PM domain provider node
- maxItems: 1
+ minItems: 1
+ items:
+ - description: optional,cx power domain
+ - description: USB gdsc power domain
You need to re-order the above. The optional one needs to be second, not first.

I wanted to use required-opps for cx domain only. so I have put it first in order.
+ power-domain-names:
+ items:
+ - const: cx
+ - const: usb_gdsc
Why do you need the names at all? The ordering of power-domains is
well defined and there are no holes in it and there are no legacy
reasons for having the names (like there are for clocks), so you
should drop. This is much like reg-names and I always point people to
this message from Rob Herring about reg-names:

https://lore.kernel.org/r/CAL_Jsq+MMunmVWqeW9v2RyzsMKP+=kMzeTHNMG4JDHM7Fy0HBg@xxxxxxxxxxxxxx/

You'll have to change your driver to use dev_pm_domain_attach_by_id()
but that should be fine.

-Doug

Ok..I will try using  dev_pm_domain_attach_by_id()