Re: [PATCH v4 2/2] iio: accel: Add driver support for ADXL313

From: Jonathan Cameron
Date: Sun Sep 05 2021 - 11:15:16 EST


On Wed, 1 Sep 2021 16:14:54 -0300
Lucas Stankus <lucas.p.stankus@xxxxxxxxx> wrote:

> ADXL313 is a small, thin, low power, 3-axis accelerometer with high
> resolution measurement up to +/-4g. It includes an integrated 32-level
> FIFO and has activity and inactivity sensing capabilities.
>
> Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf
> Signed-off-by: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> Reviewed-by: Alexandru Ardelean <ardeleanalex@xxxxxxxxx>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>

Nice work. Series applied to the togreg branch of iio.git and pushed out
as testing for 0-day to see if it can find anything we missed.

One trivial tweak to fix
CHECK drivers/iio/accel/adxl313_core.c
drivers/iio/accel/adxl313_core.c:17:27: warning: symbol 'adxl313_readable_reg_range' was not declared. Should it be static?
drivers/iio/accel/adxl313_core.c:31:27: warning: symbol 'adxl313_writable_reg_range' was not declared. Should it be static?
CHECK drivers/iio/accel/adxl313_spi.c


Thanks,

Jonathan

> ---
> MAINTAINERS | 6 +
> drivers/iio/accel/Kconfig | 29 +++
> drivers/iio/accel/Makefile | 3 +
> drivers/iio/accel/adxl313.h | 54 +++++
> drivers/iio/accel/adxl313_core.c | 332 +++++++++++++++++++++++++++++++
> drivers/iio/accel/adxl313_i2c.c | 66 ++++++
> drivers/iio/accel/adxl313_spi.c | 92 +++++++++
> 7 files changed, 582 insertions(+)
> create mode 100644 drivers/iio/accel/adxl313.h
> create mode 100644 drivers/iio/accel/adxl313_core.c
> create mode 100644 drivers/iio/accel/adxl313_i2c.c
> create mode 100644 drivers/iio/accel/adxl313_spi.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 212bad85e07a..a674f671ecb3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -591,6 +591,12 @@ L: platform-driver-x86@xxxxxxxxxxxxxxx
> S: Maintained
> F: drivers/platform/x86/adv_swbutton.c
>
> +ADXL313 THREE-AXIS DIGITAL ACCELEROMETER DRIVER
> +M: Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> +S: Supported
> +F: Documentation/devicetree/bindings/iio/accel/adi,adxl313.yaml
> +F: drivers/iio/accel/adxl313*
> +
> ADXL34X THREE-AXIS DIGITAL ACCELEROMETER DRIVER (ADXL345/ADXL346)
> M: Michael Hennerich <michael.hennerich@xxxxxxxxxx>
> S: Supported
> diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
> index 05a3504119a8..f1bc18f19342 100644
> --- a/drivers/iio/accel/Kconfig
> +++ b/drivers/iio/accel/Kconfig
> @@ -30,6 +30,35 @@ config ADIS16209
> To compile this driver as a module, say M here: the module will be
> called adis16209.
>
> +config ADXL313
> + tristate
> +
> +config ADXL313_I2C
> + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer I2C Driver"
> + depends on I2C
> + select ADXL313
> + select REGMAP_I2C
> + help
> + Say Y here if you want to build i2c support for the Analog Devices
> + ADXL313 3-axis digital accelerometer.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called adxl313_i2c and you will also get adxl313_core
> + for the core module.
> +
> +config ADXL313_SPI
> + tristate "Analog Devices ADXL313 3-Axis Digital Accelerometer SPI Driver"
> + depends on SPI
> + select ADXL313
> + select REGMAP_SPI
> + help
> + Say Y here if you want to build spi support for the Analog Devices
> + ADXL313 3-axis digital accelerometer.
> +
> + To compile this driver as a module, choose M here: the module
> + will be called adxl313_spi and you will also get adxl313_core
> + for the core module.
> +
> config ADXL345
> tristate
>
> diff --git a/drivers/iio/accel/Makefile b/drivers/iio/accel/Makefile
> index 7f4d97bf41f9..d03e2f6bba08 100644
> --- a/drivers/iio/accel/Makefile
> +++ b/drivers/iio/accel/Makefile
> @@ -6,6 +6,9 @@
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_ADIS16201) += adis16201.o
> obj-$(CONFIG_ADIS16209) += adis16209.o
> +obj-$(CONFIG_ADXL313) += adxl313_core.o
> +obj-$(CONFIG_ADXL313_I2C) += adxl313_i2c.o
> +obj-$(CONFIG_ADXL313_SPI) += adxl313_spi.o
> obj-$(CONFIG_ADXL345) += adxl345_core.o
> obj-$(CONFIG_ADXL345_I2C) += adxl345_i2c.o
> obj-$(CONFIG_ADXL345_SPI) += adxl345_spi.o
> diff --git a/drivers/iio/accel/adxl313.h b/drivers/iio/accel/adxl313.h
> new file mode 100644
> index 000000000000..4415f2fc07e1
> --- /dev/null
> +++ b/drivers/iio/accel/adxl313.h
> @@ -0,0 +1,54 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * ADXL313 3-Axis Digital Accelerometer
> + *
> + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> + */
> +
> +#ifndef _ADXL313_H_
> +#define _ADXL313_H_
> +
> +/* ADXL313 register definitions */
> +#define ADXL313_REG_DEVID0 0x00
> +#define ADXL313_REG_DEVID1 0x01
> +#define ADXL313_REG_PARTID 0x02
> +#define ADXL313_REG_XID 0x04
> +#define ADXL313_REG_SOFT_RESET 0x18
> +#define ADXL313_REG_OFS_AXIS(index) (0x1E + (index))
> +#define ADXL313_REG_THRESH_ACT 0x24
> +#define ADXL313_REG_ACT_INACT_CTL 0x27
> +#define ADXL313_REG_BW_RATE 0x2C
> +#define ADXL313_REG_POWER_CTL 0x2D
> +#define ADXL313_REG_INT_MAP 0x2F
> +#define ADXL313_REG_DATA_FORMAT 0x31
> +#define ADXL313_REG_DATA_AXIS(index) (0x32 + ((index) * 2))
> +#define ADXL313_REG_FIFO_CTL 0x38
> +#define ADXL313_REG_FIFO_STATUS 0x39
> +
> +#define ADXL313_DEVID0 0xAD
> +#define ADXL313_DEVID1 0x1D
> +#define ADXL313_PARTID 0xCB
> +#define ADXL313_SOFT_RESET 0x52
> +
> +#define ADXL313_RATE_MSK GENMASK(3, 0)
> +#define ADXL313_RATE_BASE 6
> +
> +#define ADXL313_POWER_CTL_MSK GENMASK(3, 2)
> +#define ADXL313_MEASUREMENT_MODE BIT(3)
> +
> +#define ADXL313_RANGE_MSK GENMASK(1, 0)
> +#define ADXL313_RANGE_4G 3
> +
> +#define ADXL313_FULL_RES BIT(3)
> +#define ADXL313_SPI_3WIRE BIT(6)
> +#define ADXL313_I2C_DISABLE BIT(6)
> +
> +extern const struct regmap_access_table adxl313_readable_regs_table;
> +
> +extern const struct regmap_access_table adxl313_writable_regs_table;
> +
> +int adxl313_core_probe(struct device *dev,
> + struct regmap *regmap,
> + const char *name,
> + int (*setup)(struct device *, struct regmap *));
> +#endif /* _ADXL313_H_ */
> diff --git a/drivers/iio/accel/adxl313_core.c b/drivers/iio/accel/adxl313_core.c
> new file mode 100644
> index 000000000000..3fbb546d05cb
> --- /dev/null
> +++ b/drivers/iio/accel/adxl313_core.c
> @@ -0,0 +1,332 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL313 3-Axis Digital Accelerometer
> + *
> + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> + *
> + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "adxl313.h"
> +
> +const struct regmap_range adxl313_readable_reg_range[] = {
> + regmap_reg_range(ADXL313_REG_DEVID0, ADXL313_REG_XID),
> + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
> + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
> + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
> + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_FIFO_STATUS),
> +};
> +
> +const struct regmap_access_table adxl313_readable_regs_table = {
> + .yes_ranges = adxl313_readable_reg_range,
> + .n_yes_ranges = ARRAY_SIZE(adxl313_readable_reg_range),
> +};
> +EXPORT_SYMBOL_GPL(adxl313_readable_regs_table);
> +
> +const struct regmap_range adxl313_writable_reg_range[] = {
> + regmap_reg_range(ADXL313_REG_SOFT_RESET, ADXL313_REG_SOFT_RESET),
> + regmap_reg_range(ADXL313_REG_OFS_AXIS(0), ADXL313_REG_OFS_AXIS(2)),
> + regmap_reg_range(ADXL313_REG_THRESH_ACT, ADXL313_REG_ACT_INACT_CTL),
> + regmap_reg_range(ADXL313_REG_BW_RATE, ADXL313_REG_INT_MAP),
> + regmap_reg_range(ADXL313_REG_DATA_FORMAT, ADXL313_REG_DATA_FORMAT),
> + regmap_reg_range(ADXL313_REG_FIFO_CTL, ADXL313_REG_FIFO_CTL),
> +};
> +
> +const struct regmap_access_table adxl313_writable_regs_table = {
> + .yes_ranges = adxl313_writable_reg_range,
> + .n_yes_ranges = ARRAY_SIZE(adxl313_writable_reg_range),
> +};
> +EXPORT_SYMBOL_GPL(adxl313_writable_regs_table);
> +
> +struct adxl313_data {
> + struct regmap *regmap;
> + struct mutex lock; /* lock to protect transf_buf */
> + __le16 transf_buf ____cacheline_aligned;
> +};
> +
> +static const int adxl313_odr_freqs[][2] = {
> + [0] = { 6, 250000 },
> + [1] = { 12, 500000 },
> + [2] = { 25, 0 },
> + [3] = { 50, 0 },
> + [4] = { 100, 0 },
> + [5] = { 200, 0 },
> + [6] = { 400, 0 },
> + [7] = { 800, 0 },
> + [8] = { 1600, 0 },
> + [9] = { 3200, 0 },
> +};
> +
> +#define ADXL313_ACCEL_CHANNEL(index, axis) { \
> + .type = IIO_ACCEL, \
> + .address = index, \
> + .modified = 1, \
> + .channel2 = IIO_MOD_##axis, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_CALIBBIAS), \
> + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> + .info_mask_shared_by_type_available = \
> + BIT(IIO_CHAN_INFO_SAMP_FREQ), \
> + .scan_type = { \
> + .realbits = 13, \
> + }, \
> +}
> +
> +static const struct iio_chan_spec adxl313_channels[] = {
> + ADXL313_ACCEL_CHANNEL(0, X),
> + ADXL313_ACCEL_CHANNEL(1, Y),
> + ADXL313_ACCEL_CHANNEL(2, Z),
> +};
> +
> +static int adxl313_set_odr(struct adxl313_data *data,
> + unsigned int freq1, unsigned int freq2)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ARRAY_SIZE(adxl313_odr_freqs); i++) {
> + if (adxl313_odr_freqs[i][0] == freq1 &&
> + adxl313_odr_freqs[i][1] == freq2)
> + break;
> + }
> +
> + if (i == ARRAY_SIZE(adxl313_odr_freqs))
> + return -EINVAL;
> +
> + return regmap_update_bits(data->regmap, ADXL313_REG_BW_RATE,
> + ADXL313_RATE_MSK,
> + FIELD_PREP(ADXL313_RATE_MSK, ADXL313_RATE_BASE + i));
> +}
> +
> +static int adxl313_read_axis(struct adxl313_data *data,
> + struct iio_chan_spec const *chan)
> +{
> + int ret;
> +
> + mutex_lock(&data->lock);
> +
> + ret = regmap_bulk_read(data->regmap,
> + ADXL313_REG_DATA_AXIS(chan->address),
> + &data->transf_buf, sizeof(data->transf_buf));
> + if (ret)
> + goto unlock_ret;
> +
> + ret = le16_to_cpu(data->transf_buf);
> +
> +unlock_ret:
> + mutex_unlock(&data->lock);
> + return ret;
> +}
> +
> +static int adxl313_read_freq_avail(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + const int **vals, int *type, int *length,
> + long mask)
> +{
> + switch (mask) {
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + *vals = (const int *)adxl313_odr_freqs;
> + *length = ARRAY_SIZE(adxl313_odr_freqs) * 2;
> + *type = IIO_VAL_INT_PLUS_MICRO;
> + return IIO_AVAIL_LIST;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adxl313_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long mask)
> +{
> + struct adxl313_data *data = iio_priv(indio_dev);
> + unsigned int regval;
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = adxl313_read_axis(data, chan);
> + if (ret < 0)
> + return ret;
> +
> + *val = sign_extend32(ret, chan->scan_type.realbits - 1);
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + /*
> + * Scale for any g range is given in datasheet as
> + * 1024 LSB/g = 0.0009765625 * 9.80665 = 0.009576806640625 m/s^2
> + */
> + *val = 0;
> + *val2 = 9576806;
> + return IIO_VAL_INT_PLUS_NANO;
> + case IIO_CHAN_INFO_CALIBBIAS:
> + ret = regmap_read(data->regmap,
> + ADXL313_REG_OFS_AXIS(chan->address), &regval);
> + if (ret)
> + return ret;
> +
> + /*
> + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
> + * factor at full resolution
> + */
> + *val = sign_extend32(regval, 7) * 4;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + ret = regmap_read(data->regmap, ADXL313_REG_BW_RATE, &regval);
> + if (ret)
> + return ret;
> +
> + ret = FIELD_GET(ADXL313_RATE_MSK, regval) - ADXL313_RATE_BASE;
> + *val = adxl313_odr_freqs[ret][0];
> + *val2 = adxl313_odr_freqs[ret][1];
> + return IIO_VAL_INT_PLUS_MICRO;
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adxl313_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct adxl313_data *data = iio_priv(indio_dev);
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_CALIBBIAS:
> + /*
> + * 8-bit resolution at +/- 0.5g, that is 4x accel data scale
> + * factor at full resolution
> + */
> + if (clamp_val(val, -128 * 4, 127 * 4) != val)
> + return -EINVAL;
> +
> + return regmap_write(data->regmap,
> + ADXL313_REG_OFS_AXIS(chan->address),
> + val / 4);
> + case IIO_CHAN_INFO_SAMP_FREQ:
> + return adxl313_set_odr(data, val, val2);
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static const struct iio_info adxl313_info = {
> + .read_raw = adxl313_read_raw,
> + .write_raw = adxl313_write_raw,
> + .read_avail = adxl313_read_freq_avail,
> +};
> +
> +static int adxl313_setup(struct device *dev, struct adxl313_data *data,
> + int (*setup)(struct device *, struct regmap *))
> +{
> + unsigned int regval;
> + int ret;
> +
> + /* Ensures the device is in a consistent state after start up */
> + ret = regmap_write(data->regmap, ADXL313_REG_SOFT_RESET,
> + ADXL313_SOFT_RESET);
> + if (ret)
> + return ret;
> +
> + if (setup) {
> + ret = setup(dev, data->regmap);
> + if (ret)
> + return ret;
> + }
> +
> + ret = regmap_read(data->regmap, ADXL313_REG_DEVID0, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL313_DEVID0) {
> + dev_err(dev, "Invalid manufacturer ID: 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(data->regmap, ADXL313_REG_DEVID1, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL313_DEVID1) {
> + dev_err(dev, "Invalid mems ID: 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + ret = regmap_read(data->regmap, ADXL313_REG_PARTID, &regval);
> + if (ret)
> + return ret;
> +
> + if (regval != ADXL313_PARTID) {
> + dev_err(dev, "Invalid device ID: 0x%02x\n", regval);
> + return -ENODEV;
> + }
> +
> + /* Sets the range to +/- 4g */
> + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
> + ADXL313_RANGE_MSK,
> + FIELD_PREP(ADXL313_RANGE_MSK, ADXL313_RANGE_4G));
> + if (ret)
> + return ret;
> +
> + /* Enables full resolution */
> + ret = regmap_update_bits(data->regmap, ADXL313_REG_DATA_FORMAT,
> + ADXL313_FULL_RES, ADXL313_FULL_RES);
> + if (ret)
> + return ret;
> +
> + /* Enables measurement mode */
> + return regmap_update_bits(data->regmap, ADXL313_REG_POWER_CTL,
> + ADXL313_POWER_CTL_MSK,
> + ADXL313_MEASUREMENT_MODE);
> +}
> +
> +/**
> + * adxl313_core_probe() - probe and setup for adxl313 accelerometer
> + * @dev: Driver model representation of the device
> + * @regmap: Register map of the device
> + * @name: Device name buffer reference
> + * @setup: Setup routine to be executed right before the standard device
> + * setup, can also be set to NULL if not required
> + *
> + * Return: 0 on success, negative errno on error cases
> + */
> +int adxl313_core_probe(struct device *dev,
> + struct regmap *regmap,
> + const char *name,
> + int (*setup)(struct device *, struct regmap *))
> +{
> + struct adxl313_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + data->regmap = regmap;
> + mutex_init(&data->lock);
> +
> + indio_dev->name = name;
> + indio_dev->info = &adxl313_info;
> + indio_dev->modes = INDIO_DIRECT_MODE;
> + indio_dev->channels = adxl313_channels;
> + indio_dev->num_channels = ARRAY_SIZE(adxl313_channels);
> +
> + ret = adxl313_setup(dev, data, setup);
> + if (ret) {
> + dev_err(dev, "ADXL313 setup failed\n");
> + return ret;
> + }
> +
> + return devm_iio_device_register(dev, indio_dev);
> +}
> +EXPORT_SYMBOL_GPL(adxl313_core_probe);
> +
> +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer core driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/adxl313_i2c.c b/drivers/iio/accel/adxl313_i2c.c
> new file mode 100644
> index 000000000000..82e9fb2db1e6
> --- /dev/null
> +++ b/drivers/iio/accel/adxl313_i2c.c
> @@ -0,0 +1,66 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL313 3-Axis Digital Accelerometer
> + *
> + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> + *
> + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf
> + */
> +
> +#include <linux/i2c.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +
> +#include "adxl313.h"
> +
> +static const struct regmap_config adxl313_i2c_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .rd_table = &adxl313_readable_regs_table,
> + .wr_table = &adxl313_writable_regs_table,
> + .max_register = 0x39,
> +};
> +
> +static int adxl313_i2c_probe(struct i2c_client *client)
> +{
> + struct regmap *regmap;
> +
> + regmap = devm_regmap_init_i2c(client, &adxl313_i2c_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&client->dev, "Error initializing i2c regmap: %ld\n",
> + PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return adxl313_core_probe(&client->dev, regmap, client->name, NULL);
> +}
> +
> +static const struct i2c_device_id adxl313_i2c_id[] = {
> + { "adxl313" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(i2c, adxl313_i2c_id);
> +
> +static const struct of_device_id adxl313_of_match[] = {
> + { .compatible = "adi,adxl313" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, adxl313_of_match);
> +
> +static struct i2c_driver adxl313_i2c_driver = {
> + .driver = {
> + .name = "adxl313_i2c",
> + .of_match_table = adxl313_of_match,
> + },
> + .probe_new = adxl313_i2c_probe,
> + .id_table = adxl313_i2c_id,
> +};
> +
> +module_i2c_driver(adxl313_i2c_driver);
> +
> +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer I2C driver");
> +MODULE_LICENSE("GPL v2");
> diff --git a/drivers/iio/accel/adxl313_spi.c b/drivers/iio/accel/adxl313_spi.c
> new file mode 100644
> index 000000000000..a6162f36ef52
> --- /dev/null
> +++ b/drivers/iio/accel/adxl313_spi.c
> @@ -0,0 +1,92 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADXL313 3-Axis Digital Accelerometer
> + *
> + * Copyright (c) 2021 Lucas Stankus <lucas.p.stankus@xxxxxxxxx>
> + *
> + * Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADXL313.pdf
> + */
> +
> +#include <linux/mod_devicetable.h>
> +#include <linux/module.h>
> +#include <linux/regmap.h>
> +#include <linux/spi/spi.h>
> +
> +#include "adxl313.h"
> +
> +static const struct regmap_config adxl313_spi_regmap_config = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .rd_table = &adxl313_readable_regs_table,
> + .wr_table = &adxl313_writable_regs_table,
> + .max_register = 0x39,
> + /* Setting bits 7 and 6 enables multiple-byte read */
> + .read_flag_mask = BIT(7) | BIT(6),
> +};
> +
> +static int adxl313_spi_setup(struct device *dev, struct regmap *regmap)
> +{
> + struct spi_device *spi = container_of(dev, struct spi_device, dev);
> + int ret;
> +
> + if (spi->mode & SPI_3WIRE) {
> + ret = regmap_write(regmap, ADXL313_REG_DATA_FORMAT,
> + ADXL313_SPI_3WIRE);
> + if (ret)
> + return ret;
> + }
> +
> + return regmap_update_bits(regmap, ADXL313_REG_POWER_CTL,
> + ADXL313_I2C_DISABLE, ADXL313_I2C_DISABLE);
> +}
> +
> +static int adxl313_spi_probe(struct spi_device *spi)
> +{
> + const struct spi_device_id *id = spi_get_device_id(spi);
> + struct regmap *regmap;
> + int ret;
> +
> + spi->mode |= SPI_MODE_3;
> + ret = spi_setup(spi);
> + if (ret)
> + return ret;
> +
> + regmap = devm_regmap_init_spi(spi, &adxl313_spi_regmap_config);
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "Error initializing spi regmap: %ld\n",
> + PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return adxl313_core_probe(&spi->dev, regmap, id->name,
> + &adxl313_spi_setup);
> +}
> +
> +static const struct spi_device_id adxl313_spi_id[] = {
> + { "adxl313" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(spi, adxl313_spi_id);
> +
> +static const struct of_device_id adxl313_of_match[] = {
> + { .compatible = "adi,adxl313" },
> + { }
> +};
> +
> +MODULE_DEVICE_TABLE(of, adxl313_of_match);
> +
> +static struct spi_driver adxl313_spi_driver = {
> + .driver = {
> + .name = "adxl313_spi",
> + .of_match_table = adxl313_of_match,
> + },
> + .probe = adxl313_spi_probe,
> + .id_table = adxl313_spi_id,
> +};
> +
> +module_spi_driver(adxl313_spi_driver);
> +
> +MODULE_AUTHOR("Lucas Stankus <lucas.p.stankus@xxxxxxxxx>");
> +MODULE_DESCRIPTION("ADXL313 3-Axis Digital Accelerometer SPI driver");
> +MODULE_LICENSE("GPL v2");