[PATCH v15] cpufreq: mediatek-hw: Add support for Mediatek cpufreq HW driver

From: Hector Yuan
Date: Fri Sep 03 2021 - 04:39:38 EST


The CPUfreq HW present in some Mediatek chipsets offloads the steps necessary for changing the frequency of CPUs.
The driver implements the cpufreq driver interface for this hardware engine.

>From v14 to v15, there are three modifications.
1. Move platform data from per-policy to probe
2. Update energy model register to callback function

>From v13 to v14, there are three modifications.
1. Replace cpu domain map to policy driver data
2. Remove dummy performance-domain parsing
3. Separate modification in cpufreq.h to another patch

>From v12 to v13, there are two modifications.
1. Move related_cpus function to common place, so all performance-domain cpufreq driver can refer.
2. Make cpu resource init to each policy rather than per-cpu

>From v11 to v12, there are two modifications.
1. Based on patchset[1], align binding with scmi for performance domain(latest version).
2. Shrink binding example wording.

>From v8 to v9, there are three more modifications.
1. Based on patchset[2], align binding with scmi for performance domain.
2. Add the CPUFREQ fast switch function support and define DVFS latency.
3. Based on patchser[3], add energy model API parameter for mW.

>From v7 to v8, there are three more patches based on patchset v8[4].
This patchset is about to register power table to Energy model for EAS and thermal usage.
1. EM CPU power table
- Register energy model table for EAS and thermal cooling device usage.
- Read the coresponding LUT for power table.
2. SVS initialization
- The SVS(Smart Voltage Scaling) engine is a hardware which is
used to calculate optimized voltage values for CPU power domain.
DVFS driver could apply those optimized voltage values to reduce power consumption.
- Driver will polling if HW engine is done for SVS initialization.
After that, driver will read power table and register it to EAS.
- CPUs must be in power on state when doing SVS. Use pm_qos to block cpu-idle state for SVS initializing.
3. Cooling device flag
- Add cooling device flag for thermal
[1] https://lore.kernel.org/linux-devicetree/20210517155458.1016707-1-sudeep.holla@xxxxxxx/
[2] https://lore.kernel.org/lkml/20201116181356.804590-1-sudeep.holla@xxxxxxx/
[3] https://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git/commit/?h=linux-next&id=c250d50fe2ce627ca9805d9c8ac11cbbf922a4a6
[4] https://lkml.org/lkml/2020/9/23/384


Hector.Yuan (3):
dt-bindings: cpufreq: add bindings for MediaTek cpufreq HW
cpufreq: Add of_perf_domain_get_sharing_cpumask
cpufreq: mediatek-hw: Add support for CPUFREQ HW

.../bindings/cpufreq/cpufreq-mediatek-hw.yaml | 70 ++++
drivers/cpufreq/Kconfig.arm | 12 +
drivers/cpufreq/Makefile | 1 +
drivers/cpufreq/mediatek-cpufreq-hw.c | 340 ++++++++++++++++++
include/linux/cpufreq.h | 46 ++-
5 files changed, 468 insertions(+), 1 deletion(-)
create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
create mode 100644 drivers/cpufreq/mediatek-cpufreq-hw.c