RE: [PATCH V4 11/13] hyperv/IOMMU: Enable swiotlb bounce buffer for Isolation VM

From: Michael Kelley
Date: Wed Sep 01 2021 - 21:27:46 EST

Next message: Alyssa Rosenzweig: "Re: [PATCH] maintainers: Add Alyssa Rosenzweig as M1 reviewer"
Previous message: Daniel Jordan: "Re: [PATCH v3 1/4] sched: cgroup SCHED_IDLE support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

From: Tianyu Lan <ltykernel@xxxxxxxxx> Sent: Friday, August 27, 2021 10:21 AM
>
> hyperv Isolation VM requires bounce buffer support to copy
> data from/to encrypted memory and so enable swiotlb force
> mode to use swiotlb bounce buffer for DMA transaction.
>
> In Isolation VM with AMD SEV, the bounce buffer needs to be
> accessed via extra address space which is above shared_gpa_boundary
> (E.G 39 bit address line) reported by Hyper-V CPUID ISOLATION_CONFIG.
> The access physical address will be original physical address +
> shared_gpa_boundary. The shared_gpa_boundary in the AMD SEV SNP
> spec is called virtual top of memory(vTOM). Memory addresses below
> vTOM are automatically treated as private while memory above
> vTOM is treated as shared.
>
> Swiotlb bounce buffer code calls dma_map_decrypted()
> to mark bounce buffer visible to host and map it in extra
> address space. Populate dma memory decrypted ops with hv
> map/unmap function.
>
> Hyper-V initalizes swiotlb bounce buffer and default swiotlb
> needs to be disabled. pci_swiotlb_detect_override() and
> pci_swiotlb_detect_4gb() enable the default one. To override
> the setting, hyperv_swiotlb_detect() needs to run before
> these detect functions which depends on the pci_xen_swiotlb_
> init(). Make pci_xen_swiotlb_init() depends on the hyperv_swiotlb
> _detect() to keep the order.
>
> The map function vmap_pfn() can't work in the early place
> hyperv_iommu_swiotlb_init() and so initialize swiotlb bounce
> buffer in the hyperv_iommu_swiotlb_later_init().
>
> Signed-off-by: Tianyu Lan <Tianyu.Lan@xxxxxxxxxxxxx>
> ---
> Change since v3:
> * Get hyperv bounce bufffer size via default swiotlb
> bounce buffer size function and keep default size as
> same as the one in the AMD SEV VM.
> ---
> arch/x86/hyperv/ivm.c | 28 +++++++++++++++
> arch/x86/include/asm/mshyperv.h | 2 ++
> arch/x86/mm/mem_encrypt.c | 3 +-
> arch/x86/xen/pci-swiotlb-xen.c | 3 +-
> drivers/hv/vmbus_drv.c | 3 ++
> drivers/iommu/hyperv-iommu.c | 61 +++++++++++++++++++++++++++++++++
> include/linux/hyperv.h | 1 +
> 7 files changed, 99 insertions(+), 2 deletions(-)
>
> diff --git a/arch/x86/hyperv/ivm.c b/arch/x86/hyperv/ivm.c
> index e761c67e2218..84563b3c9f3a 100644
> --- a/arch/x86/hyperv/ivm.c
> +++ b/arch/x86/hyperv/ivm.c
> @@ -294,3 +294,31 @@ int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible)
>
> return __hv_set_mem_host_visibility((void *)addr, numpages, visibility);
> }
> +
> +/*
> + * hv_map_memory - map memory to extra space in the AMD SEV-SNP Isolation VM.
> + */
> +void *hv_map_memory(void *addr, unsigned long size)
> +{
> + unsigned long *pfns = kcalloc(size / HV_HYP_PAGE_SIZE,
> + sizeof(unsigned long), GFP_KERNEL);

Should be PAGE_SIZE, not HV_HYP_PAGE_SIZE, since this code
only manipulates guest page tables. There's no communication with
Hyper-V that requires HV_HYP_PAGE_SIZE.

> + void *vaddr;
> + int i;
> +
> + if (!pfns)
> + return NULL;
> +
> + for (i = 0; i < size / PAGE_SIZE; i++)
> + pfns[i] = virt_to_hvpfn(addr + i * PAGE_SIZE) +

Use virt_to_pfn(), not virt_to_hvpfn(), for the same reason.

> + (ms_hyperv.shared_gpa_boundary >> PAGE_SHIFT);
> +
> + vaddr = vmap_pfn(pfns, size / PAGE_SIZE, PAGE_KERNEL_IO);
> + kfree(pfns);
> +
> + return vaddr;
> +}
> +
> +void hv_unmap_memory(void *addr)
> +{
> + vunmap(addr);
> +}
> diff --git a/arch/x86/include/asm/mshyperv.h b/arch/x86/include/asm/mshyperv.h
> index b77f4caee3ee..627fcf8d443c 100644
> --- a/arch/x86/include/asm/mshyperv.h
> +++ b/arch/x86/include/asm/mshyperv.h
> @@ -252,6 +252,8 @@ int hv_unmap_ioapic_interrupt(int ioapic_id, struct hv_interrupt_entry *entry);
> int hv_mark_gpa_visibility(u16 count, const u64 pfn[],
> enum hv_mem_host_visibility visibility);
> int hv_set_mem_host_visibility(unsigned long addr, int numpages, bool visible);
> +void *hv_map_memory(void *addr, unsigned long size);
> +void hv_unmap_memory(void *addr);
> void hv_sint_wrmsrl_ghcb(u64 msr, u64 value);
> void hv_sint_rdmsrl_ghcb(u64 msr, u64 *value);
> void hv_signal_eom_ghcb(void);
> diff --git a/arch/x86/mm/mem_encrypt.c b/arch/x86/mm/mem_encrypt.c
> index ff08dc463634..e2db0b8ed938 100644
> --- a/arch/x86/mm/mem_encrypt.c
> +++ b/arch/x86/mm/mem_encrypt.c
> @@ -30,6 +30,7 @@
> #include <asm/processor-flags.h>
> #include <asm/msr.h>
> #include <asm/cmdline.h>
> +#include <asm/mshyperv.h>
>
> #include "mm_internal.h"
>
> @@ -202,7 +203,7 @@ void __init sev_setup_arch(void)
> phys_addr_t total_mem = memblock_phys_mem_size();
> unsigned long size;
>
> - if (!sev_active())
> + if (!sev_active() && !hv_is_isolation_supported())
> return;
>
> /*
> diff --git a/arch/x86/xen/pci-swiotlb-xen.c b/arch/x86/xen/pci-swiotlb-xen.c
> index 54f9aa7e8457..43bd031aa332 100644
> --- a/arch/x86/xen/pci-swiotlb-xen.c
> +++ b/arch/x86/xen/pci-swiotlb-xen.c
> @@ -4,6 +4,7 @@
>
> #include <linux/dma-map-ops.h>
> #include <linux/pci.h>
> +#include <linux/hyperv.h>
> #include <xen/swiotlb-xen.h>
>
> #include <asm/xen/hypervisor.h>
> @@ -91,6 +92,6 @@ int pci_xen_swiotlb_init_late(void)
> EXPORT_SYMBOL_GPL(pci_xen_swiotlb_init_late);
>
> IOMMU_INIT_FINISH(pci_xen_swiotlb_detect,
> - NULL,
> + hyperv_swiotlb_detect,
> pci_xen_swiotlb_init,
> NULL);
> diff --git a/drivers/hv/vmbus_drv.c b/drivers/hv/vmbus_drv.c
> index 57bbbaa4e8f7..f068e22a5636 100644
> --- a/drivers/hv/vmbus_drv.c
> +++ b/drivers/hv/vmbus_drv.c
> @@ -23,6 +23,7 @@
> #include <linux/cpu.h>
> #include <linux/sched/task_stack.h>
>
> +#include <linux/dma-map-ops.h>
> #include <linux/delay.h>
> #include <linux/notifier.h>
> #include <linux/panic_notifier.h>
> @@ -2081,6 +2082,7 @@ struct hv_device *vmbus_device_create(const guid_t *type,
> return child_device_obj;
> }
>
> +static u64 vmbus_dma_mask = DMA_BIT_MASK(64);
> /*
> * vmbus_device_register - Register the child device
> */
> @@ -2121,6 +2123,7 @@ int vmbus_device_register(struct hv_device *child_device_obj)
> }
> hv_debug_add_dev_dir(child_device_obj);
>
> + child_device_obj->device.dma_mask = &vmbus_dma_mask;
> return 0;
>
> err_kset_unregister:
> diff --git a/drivers/iommu/hyperv-iommu.c b/drivers/iommu/hyperv-iommu.c
> index e285a220c913..899563551574 100644
> --- a/drivers/iommu/hyperv-iommu.c
> +++ b/drivers/iommu/hyperv-iommu.c
> @@ -13,14 +13,22 @@
> #include <linux/irq.h>
> #include <linux/iommu.h>
> #include <linux/module.h>
> +#include <linux/hyperv.h>
> +#include <linux/io.h>
>
> #include <asm/apic.h>
> #include <asm/cpu.h>
> #include <asm/hw_irq.h>
> #include <asm/io_apic.h>
> +#include <asm/iommu.h>
> +#include <asm/iommu_table.h>
> #include <asm/irq_remapping.h>
> #include <asm/hypervisor.h>
> #include <asm/mshyperv.h>
> +#include <asm/swiotlb.h>
> +#include <linux/dma-map-ops.h>
> +#include <linux/dma-direct.h>
> +#include <linux/set_memory.h>
>
> #include "irq_remapping.h"
>
> @@ -36,6 +44,9 @@
> static cpumask_t ioapic_max_cpumask = { CPU_BITS_NONE };
> static struct irq_domain *ioapic_ir_domain;
>
> +static unsigned long hyperv_io_tlb_size;
> +static void *hyperv_io_tlb_start;
> +
> static int hyperv_ir_set_affinity(struct irq_data *data,
> const struct cpumask *mask, bool force)
> {
> @@ -337,4 +348,54 @@ static const struct irq_domain_ops hyperv_root_ir_domain_ops = {
> .free = hyperv_root_irq_remapping_free,
> };
>
> +void __init hyperv_iommu_swiotlb_init(void)
> +{
> + /*
> + * Allocate Hyper-V swiotlb bounce buffer at early place
> + * to reserve large contiguous memory.
> + */
> + hyperv_io_tlb_size = swiotlb_size_or_default();
> + hyperv_io_tlb_start = memblock_alloc(
> + hyperv_io_tlb_size, HV_HYP_PAGE_SIZE);

Could the alignment be specified as just PAGE_SIZE? I don't
see any particular relationship here to the Hyper-V page size.

> +
> + if (!hyperv_io_tlb_start) {
> + pr_warn("Fail to allocate Hyper-V swiotlb buffer.\n");
> + return;
> + }
> +}
> +
> +int __init hyperv_swiotlb_detect(void)
> +{
> + if (hypervisor_is_type(X86_HYPER_MS_HYPERV)
> + && hv_is_isolation_supported()) {
> + /*
> + * Enable swiotlb force mode in Isolation VM to
> + * use swiotlb bounce buffer for dma transaction.
> + */
> + swiotlb_force = SWIOTLB_FORCE;
> +
> + dma_memory_generic_decrypted_ops.map = hv_map_memory;
> + dma_memory_generic_decrypted_ops.unmap = hv_unmap_memory;
> + return 1;
> + }
> +
> + return 0;
> +}
> +
> +void __init hyperv_iommu_swiotlb_later_init(void)
> +{
> + /*
> + * Swiotlb bounce buffer needs to be mapped in extra address
> + * space. Map function doesn't work in the early place and so
> + * call swiotlb_late_init_with_tbl() here.
> + */
> + if (swiotlb_late_init_with_tbl(hyperv_io_tlb_start,
> + hyperv_io_tlb_size >> IO_TLB_SHIFT))
> + panic("Fail to initialize hyperv swiotlb.\n");
> +}
> +
> +IOMMU_INIT_FINISH(hyperv_swiotlb_detect,
> + NULL, hyperv_iommu_swiotlb_init,
> + hyperv_iommu_swiotlb_later_init);
> +
> #endif
> diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h
> index 757e09606fd3..724a735d722a 100644
> --- a/include/linux/hyperv.h
> +++ b/include/linux/hyperv.h
> @@ -1739,6 +1739,7 @@ int hyperv_write_cfg_blk(struct pci_dev *dev, void *buf, unsigned int len,
> int hyperv_reg_block_invalidate(struct pci_dev *dev, void *context,
> void (*block_invalidate)(void *context,
> u64 block_mask));
> +int __init hyperv_swiotlb_detect(void);
>
> struct hyperv_pci_block_ops {
> int (*read_block)(struct pci_dev *dev, void *buf, unsigned int buf_len,
> --
> 2.25.1

Next message: Alyssa Rosenzweig: "Re: [PATCH] maintainers: Add Alyssa Rosenzweig as M1 reviewer"
Previous message: Daniel Jordan: "Re: [PATCH v3 1/4] sched: cgroup SCHED_IDLE support"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]