Re: [PATCH] RDMA: switch from 'pci_' to 'dma_' API

[Jason Gunthorpe]

On Sun, Aug 22, 2021 at 02:24:44PM +0200, Christophe JAILLET wrote:
> The wrappers in include/linux/pci-dma-compat.h should go away.
> 
> The patch has been generated with the coccinelle script below.
> 
> It has been hand modified to use 'dma_set_mask_and_coherent()' instead of
> 'pci_set_dma_mask()/pci_set_consistent_dma_mask()' when applicable.
> This is less verbose.
> 
> It has been compile tested.
> 
> 
> @@
> @@
> -    PCI_DMA_BIDIRECTIONAL
> +    DMA_BIDIRECTIONAL
> 
> @@
> @@
> -    PCI_DMA_TODEVICE
> +    DMA_TO_DEVICE
> 
> @@
> @@
> -    PCI_DMA_FROMDEVICE
> +    DMA_FROM_DEVICE
> 
> @@
> @@
> -    PCI_DMA_NONE
> +    DMA_NONE
> 
> @@
> expression e1, e2, e3;
> @@
> -    pci_alloc_consistent(e1, e2, e3)
> +    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
> 
> @@
> expression e1, e2, e3;
> @@
> -    pci_zalloc_consistent(e1, e2, e3)
> +    dma_alloc_coherent(&e1->dev, e2, e3, GFP_)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_free_consistent(e1, e2, e3, e4)
> +    dma_free_coherent(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_map_single(e1, e2, e3, e4)
> +    dma_map_single(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_unmap_single(e1, e2, e3, e4)
> +    dma_unmap_single(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4, e5;
> @@
> -    pci_map_page(e1, e2, e3, e4, e5)
> +    dma_map_page(&e1->dev, e2, e3, e4, e5)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_unmap_page(e1, e2, e3, e4)
> +    dma_unmap_page(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_map_sg(e1, e2, e3, e4)
> +    dma_map_sg(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_unmap_sg(e1, e2, e3, e4)
> +    dma_unmap_sg(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_dma_sync_single_for_cpu(e1, e2, e3, e4)
> +    dma_sync_single_for_cpu(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_dma_sync_single_for_device(e1, e2, e3, e4)
> +    dma_sync_single_for_device(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_dma_sync_sg_for_cpu(e1, e2, e3, e4)
> +    dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2, e3, e4;
> @@
> -    pci_dma_sync_sg_for_device(e1, e2, e3, e4)
> +    dma_sync_sg_for_device(&e1->dev, e2, e3, e4)
> 
> @@
> expression e1, e2;
> @@
> -    pci_dma_mapping_error(e1, e2)
> +    dma_mapping_error(&e1->dev, e2)
> 
> @@
> expression e1, e2;
> @@
> -    pci_set_dma_mask(e1, e2)
> +    dma_set_mask(&e1->dev, e2)
> 
> @@
> expression e1, e2;
> @@
> -    pci_set_consistent_dma_mask(e1, e2)
> +    dma_set_coherent_mask(&e1->dev, e2)
> 
> Signed-off-by: Christophe JAILLET <christophe.jaillet@xxxxxxxxxx>
> ---
> If needed, see post from Christoph Hellwig on the kernel-janitors ML:
>    https://marc.info/?l=kernel-janitors&m=158745678307186&w=4
> 
> This patch is mostly mechanical and compile tested. I hope it is ok to
> update the "drivers/infiniband/hw/" directory all at once.

I think I would have preferred to see the more tricky
dma_set_mask_and_coherent() conversion as its own patch, but it looks
OK

> ---
>  drivers/infiniband/hw/hfi1/pcie.c             | 11 ++-------
>  drivers/infiniband/hw/hfi1/user_exp_rcv.c     | 13 +++++------
>  drivers/infiniband/hw/mthca/mthca_eq.c        | 21 +++++++++--------
>  drivers/infiniband/hw/mthca/mthca_main.c      | 15 ++----------
>  drivers/infiniband/hw/mthca/mthca_memfree.c   | 23 +++++++++++--------
>  drivers/infiniband/hw/qib/qib_file_ops.c      | 12 +++++-----
>  drivers/infiniband/hw/qib/qib_init.c          |  4 ++--
>  drivers/infiniband/hw/qib/qib_user_pages.c    | 12 +++++-----
>  .../infiniband/hw/vmw_pvrdma/pvrdma_main.c    | 14 +++--------
>  9 files changed, 51 insertions(+), 74 deletions(-)

Applied to for-next, thanks

Jason