Re: [PATCH] clk: ralink: avoid to set 'CLK_IS_CRITICAL' flag for gates

[Sergio Paracuellos]

On Tue, Jul 27, 2021 at 7:55 AM Sergio Paracuellos
<sergio.paracuellos@xxxxxxxxx> wrote:
>
> 'clk_init_data' for gates is setting up 'CLK_IS_CRITICAL'
> flag for all of them. This was being doing because some
> drivers of this SoC might not be ready to use the clock
> and we don't wanted the kernel to disable them since default
> behaviour without clock driver was to set all gate bits to
> enabled state. After a bit more testing and checking driver
> code it is safe to remove this flag and just let the kernel
> to disable those gates that are not in use. No regressions
> seems to appear.
>
> Fixes: 48df7a26f470 ("clk: ralink: add clock driver for mt7621 SoC")
> Signed-off-by: Sergio Paracuellos <sergio.paracuellos@xxxxxxxxx>
> ---
>  drivers/clk/ralink/clk-mt7621.c | 9 +--------
>  1 file changed, 1 insertion(+), 8 deletions(-)

Hi Stephen,

Are you ok with this?? It has been a while without response.

Thanks in advance for your time.

Sergio Paracuellos

>
> diff --git a/drivers/clk/ralink/clk-mt7621.c b/drivers/clk/ralink/clk-mt7621.c
> index 857da1e274be..a2c045390f00 100644
> --- a/drivers/clk/ralink/clk-mt7621.c
> +++ b/drivers/clk/ralink/clk-mt7621.c
> @@ -131,14 +131,7 @@ static int mt7621_gate_ops_init(struct device *dev,
>                                 struct mt7621_gate *sclk)
>  {
>         struct clk_init_data init = {
> -               /*
> -                * Until now no clock driver existed so
> -                * these SoC drivers are not prepared
> -                * yet for the clock. We don't want kernel to
> -                * disable anything so we add CLK_IS_CRITICAL
> -                * flag here.
> -                */
> -               .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
> +               .flags = CLK_SET_RATE_PARENT,
>                 .num_parents = 1,
>                 .parent_names = &sclk->parent_name,
>                 .ops = &mt7621_gate_ops,
> --
> 2.25.1
>