Re: [PATCH 1/2] staging/rtl8192u: Avoid CamelCase in names of variables
From: Kees Cook
Date: Sun Aug 22 2021 - 11:02:25 EST
On Sun, Aug 22, 2021 at 04:28:19PM +0200, Len Baker wrote:
> Avoid CameCase in the names of all local variables inside the function
> rtl8192_phy_SwChnlStepByStep().
This mixes decamelization with some (minor) logic changes (moving
initializations earlier). I'd normally do this kind of thing with a sed
script and not touch anything else, so that the results can be compared
against the sed command. And I'd include the sed command in the commit
log.
I'm actually not sure what the norm is in the kernel for doing
decamelization -- should the entire driver get decamelized at once,
instead of just one function at a time? Greg, do you have an opinion
here?
-Kees
>
> Signed-off-by: Len Baker <len.baker@xxxxxxx>
> ---
> drivers/staging/rtl8192u/r819xU_phy.c | 92 +++++++++++++--------------
> 1 file changed, 44 insertions(+), 48 deletions(-)
>
> diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
> index 37b82553412e..ff6fe2ee3349 100644
> --- a/drivers/staging/rtl8192u/r819xU_phy.c
> +++ b/drivers/staging/rtl8192u/r819xU_phy.c
> @@ -1185,30 +1185,30 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> u8 *stage, u8 *step, u32 *delay)
> {
> struct r8192_priv *priv = ieee80211_priv(dev);
> - struct sw_chnl_cmd *PreCommonCmd;
> - u32 PreCommonCmdCnt;
> - struct sw_chnl_cmd *PostCommonCmd;
> - u32 PostCommonCmdCnt;
> - struct sw_chnl_cmd *RfDependCmd;
> - u32 RfDependCmdCnt;
> - struct sw_chnl_cmd *CurrentCmd = NULL;
> - u8 e_rfpath;
> - bool ret;
> -
> - PreCommonCmd = kzalloc(sizeof(*PreCommonCmd) * MAX_PRECMD_CNT, GFP_KERNEL);
> - if (!PreCommonCmd)
> + struct sw_chnl_cmd *pre_cmd;
> + u32 pre_cmd_cnt = 0;
> + struct sw_chnl_cmd *post_cmd;
> + u32 post_cmd_cnt = 0;
> + struct sw_chnl_cmd *rf_cmd;
> + u32 rf_cmd_cnt = 0;
> + struct sw_chnl_cmd *current_cmd = NULL;
> + u8 e_rfpath;
> + bool ret;
> +
> + pre_cmd = kzalloc(sizeof(*pre_cmd) * MAX_PRECMD_CNT, GFP_KERNEL);
> + if (!pre_cmd)
> return false;
>
> - PostCommonCmd = kzalloc(sizeof(*PostCommonCmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
> - if (!PostCommonCmd) {
> - kfree(PreCommonCmd);
> + post_cmd = kzalloc(sizeof(*post_cmd) * MAX_POSTCMD_CNT, GFP_KERNEL);
> + if (!post_cmd) {
> + kfree(pre_cmd);
> return false;
> }
>
> - RfDependCmd = kzalloc(sizeof(*RfDependCmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
> - if (!RfDependCmd) {
> - kfree(PreCommonCmd);
> - kfree(PostCommonCmd);
> + rf_cmd = kzalloc(sizeof(*rf_cmd) * MAX_RFDEPENDCMD_CNT, GFP_KERNEL);
> + if (!rf_cmd) {
> + kfree(pre_cmd);
> + kfree(post_cmd);
> return false;
> }
>
> @@ -1225,21 +1225,17 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> /* FIXME: need to check whether channel is legal or not here */
>
> /* <1> Fill up pre common command. */
> - PreCommonCmdCnt = 0;
> - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
> MAX_PRECMD_CNT, CMD_ID_SET_TX_PWR_LEVEL,
> 0, 0, 0);
> - rtl8192_phy_SetSwChnlCmdArray(PreCommonCmd, PreCommonCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(pre_cmd, pre_cmd_cnt++,
> MAX_PRECMD_CNT, CMD_ID_END, 0, 0, 0);
>
> /* <2> Fill up post common command. */
> - PostCommonCmdCnt = 0;
> -
> - rtl8192_phy_SetSwChnlCmdArray(PostCommonCmd, PostCommonCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(post_cmd, post_cmd_cnt++,
> MAX_POSTCMD_CNT, CMD_ID_END, 0, 0, 0);
>
> /* <3> Fill up RF dependent command. */
> - RfDependCmdCnt = 0;
> switch (priv->rf_chip) {
> case RF_8225:
> if (!(channel >= 1 && channel <= 14)) {
> @@ -1249,13 +1245,13 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> ret = true;
> goto out;
> }
> - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
> MAX_RFDEPENDCMD_CNT,
> CMD_ID_RF_WRITE_REG,
> rZebra1_Channel,
> RF_CHANNEL_TABLE_ZEBRA[channel],
> 10);
> - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
> MAX_RFDEPENDCMD_CNT,
> CMD_ID_END, 0, 0, 0);
> break;
> @@ -1269,11 +1265,11 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> ret = true;
> goto out;
> }
> - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
> MAX_RFDEPENDCMD_CNT,
> CMD_ID_RF_WRITE_REG,
> rZebra1_Channel, channel, 10);
> - rtl8192_phy_SetSwChnlCmdArray(RfDependCmd, RfDependCmdCnt++,
> + rtl8192_phy_SetSwChnlCmdArray(rf_cmd, rf_cmd_cnt++,
> MAX_RFDEPENDCMD_CNT,
> CMD_ID_END, 0, 0, 0);
> break;
> @@ -1290,19 +1286,19 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> do {
> switch (*stage) {
> case 0:
> - CurrentCmd = &PreCommonCmd[*step];
> + current_cmd = &pre_cmd[*step];
> break;
> case 1:
> - CurrentCmd = &RfDependCmd[*step];
> + current_cmd = &rf_cmd[*step];
> break;
> case 2:
> - CurrentCmd = &PostCommonCmd[*step];
> + current_cmd = &post_cmd[*step];
> break;
> }
>
> - if (CurrentCmd->cmd_id == CMD_ID_END) {
> + if (current_cmd->cmd_id == CMD_ID_END) {
> if ((*stage) == 2) {
> - (*delay) = CurrentCmd->ms_delay;
> + *delay = current_cmd->ms_delay;
> ret = true;
> goto out;
> }
> @@ -1311,31 +1307,31 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> continue;
> }
>
> - switch (CurrentCmd->cmd_id) {
> + switch (current_cmd->cmd_id) {
> case CMD_ID_SET_TX_PWR_LEVEL:
> if (priv->card_8192_version == VERSION_819XU_A)
> /* consider it later! */
> rtl8192_SetTxPowerLevel(dev, channel);
> break;
> case CMD_ID_WRITE_PORT_ULONG:
> - write_nic_dword(dev, CurrentCmd->para_1,
> - CurrentCmd->para_2);
> + write_nic_dword(dev, current_cmd->para_1,
> + current_cmd->para_2);
> break;
> case CMD_ID_WRITE_PORT_USHORT:
> - write_nic_word(dev, CurrentCmd->para_1,
> - (u16)CurrentCmd->para_2);
> + write_nic_word(dev, current_cmd->para_1,
> + (u16)current_cmd->para_2);
> break;
> case CMD_ID_WRITE_PORT_UCHAR:
> - write_nic_byte(dev, CurrentCmd->para_1,
> - (u8)CurrentCmd->para_2);
> + write_nic_byte(dev, current_cmd->para_1,
> + (u8)current_cmd->para_2);
> break;
> case CMD_ID_RF_WRITE_REG:
> for (e_rfpath = 0; e_rfpath < RF90_PATH_MAX; e_rfpath++) {
> rtl8192_phy_SetRFReg(dev,
> (enum rf90_radio_path_e)e_rfpath,
> - CurrentCmd->para_1,
> + current_cmd->para_1,
> bZebra1_ChannelNum,
> - CurrentCmd->para_2);
> + current_cmd->para_2);
> }
> break;
> default:
> @@ -1345,14 +1341,14 @@ static u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel,
> break;
> } while (true);
>
> - (*delay) = CurrentCmd->ms_delay;
> + *delay = current_cmd->ms_delay;
> (*step)++;
> ret = false;
>
> out:
> - kfree(PreCommonCmd);
> - kfree(PostCommonCmd);
> - kfree(RfDependCmd);
> + kfree(pre_cmd);
> + kfree(post_cmd);
> + kfree(rf_cmd);
>
> return ret;
> }
> --
> 2.25.1
>
--
Kees Cook