RE: [PATCH 09/16] iio: adc: max1027: Create a helper to configure the channels to scan

[Sa, Nuno]

> -----Original Message-----
> From: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> Sent: Wednesday, August 18, 2021 1:12 PM
> To: Jonathan Cameron <jic23@xxxxxxxxxx>; Lars-Peter Clausen
> <lars@xxxxxxxxxx>
> Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxx>; linux-
> iio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Miquel Raynal
> <miquel.raynal@xxxxxxxxxxx>
> Subject: [PATCH 09/16] iio: adc: max1027: Create a helper to configure
> the channels to scan
> 
> [External]
> 
> These bits are meant to be reused for triggered buffers setup.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
>  drivers/iio/adc/max1027.c | 26 ++++++++++++++++++--------
>  1 file changed, 18 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/iio/adc/max1027.c b/drivers/iio/adc/max1027.c
> index 4a78c9cbc339..223c9e4abd86 100644
> --- a/drivers/iio/adc/max1027.c
> +++ b/drivers/iio/adc/max1027.c
> @@ -236,6 +236,22 @@ struct max1027_state {
>  	u8				reg ____cacheline_aligned;
>  };
> 
> +/* Scan from 0 to the highest requested channel */
> +static int max1027_configure_chans_to_scan(struct iio_dev
> *indio_dev)
> +{
> +	struct max1027_state *st = iio_priv(indio_dev);
> +	int ret;
> +
> +	/* The temperature could be avoided but it simplifies a bit the
> logic */
> +	st->reg = MAX1027_CONV_REG | MAX1027_SCAN_0_N |
> MAX1027_TEMP;
> +	st->reg |= MAX1027_CHAN(fls(*indio_dev-
> >active_scan_mask) - 2);
> +	ret = spi_write(st->spi, &st->reg, 1);
> +	if (ret < 0)
> +		return ret;
> +
> +	return 0;

return spi_write(st->spi, &st->reg, 1);?

> +}
> +
>  static int max1027_configure_trigger(struct iio_dev *indio_dev)
>  {
>  	struct max1027_state *st = iio_priv(indio_dev);
> @@ -391,14 +407,8 @@ static int
> max1027_set_cnvst_trigger_state(struct iio_trigger *trig, bool state)
>  		if (ret)
>  			return ret;
> 
> -		/*
> -		 * Scan from 0 to the highest requested channel. The
> temperature
> -		 * could be avoided but it simplifies a bit the logic.
> -		 */
> -		st->reg = MAX1027_CONV_REG |
> MAX1027_SCAN_0_N | MAX1027_TEMP;
> -		st->reg |= MAX1027_CHAN(fls(*indio_dev-
> >active_scan_mask) - 2);
> -		ret = spi_write(st->spi, &st->reg, 1);
> -		if (ret < 0)
> +		ret = max1027_configure_chans_to_scan(indio_dev);
> +		if (ret)
>  			return ret;
>  	} else {
>  		/*
> --
> 2.27.0