Re: [PATCH v2 3/8] dt-bindings: clock: samsung: convert Exynos542x to dtschema

[Krzysztof Kozlowski]

On 17/08/2021 22:21, Rob Herring wrote:
> On Tue, Aug 10, 2021 at 11:31:40AM +0200, Krzysztof Kozlowski wrote:
>> Merge Exynos542x clock controller bindings to existing DT schema.
>>
>> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
>> ---
>>  .../bindings/clock/exynos5420-clock.txt       | 42 -------------------
>>  .../bindings/clock/samsung,exynos-clock.yaml  | 11 ++++-
>>  2 files changed, 10 insertions(+), 43 deletions(-)
>>  delete mode 100644 Documentation/devicetree/bindings/clock/exynos5420-clock.txt
>>
>> diff --git a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt b/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
>> deleted file mode 100644
>> index 717a7b1531c7..000000000000
>> --- a/Documentation/devicetree/bindings/clock/exynos5420-clock.txt
>> +++ /dev/null
>> @@ -1,42 +0,0 @@
>> -* Samsung Exynos5420 Clock Controller
>> -
>> -The Exynos5420 clock controller generates and supplies clock to various
>> -controllers within the Exynos5420 SoC and for the Exynos5800 SoC.
>> -
>> -Required Properties:
>> -
>> -- compatible: should be one of the following.
>> -  - "samsung,exynos5420-clock" - controller compatible with Exynos5420 SoC.
>> -  - "samsung,exynos5800-clock" - controller compatible with Exynos5800 SoC.
>> -
>> -- reg: physical base address of the controller and length of memory mapped
>> -  region.
>> -
>> -- #clock-cells: should be 1.
>> -
>> -Each clock is assigned an identifier and client nodes can use this identifier
>> -to specify the clock which they consume.
>> -
>> -All available clocks are defined as preprocessor macros in
>> -dt-bindings/clock/exynos5420.h header and can be used in device
>> -tree sources.
>> -
>> -Example 1: An example of a clock controller node is listed below.
>> -
>> -	clock: clock-controller@10010000 {
>> -		compatible = "samsung,exynos5420-clock";
>> -		reg = <0x10010000 0x30000>;
>> -		#clock-cells = <1>;
>> -	};
>> -
>> -Example 2: UART controller node that consumes the clock generated by the clock
>> -	   controller. Refer to the standard clock bindings for information
>> -	   about 'clocks' and 'clock-names' property.
>> -
>> -	serial@13820000 {
>> -		compatible = "samsung,exynos4210-uart";
>> -		reg = <0x13820000 0x100>;
>> -		interrupts = <0 54 0>;
>> -		clocks = <&clock CLK_UART2>, <&clock CLK_SCLK_UART2>;
>> -		clock-names = "uart", "clk_uart_baud0";
>> -	};
>> diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
>> index cd6567bd8cc7..b0f58a1cf6cb 100644
>> --- a/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
>> +++ b/Documentation/devicetree/bindings/clock/samsung,exynos-clock.yaml
>> @@ -18,7 +18,16 @@ description: |
>>  
>>  properties:
>>    compatible:
>> -    const: samsung,exynos5250-clock
>> +    oneOf:
>> +      - enum:
>> +          - samsung,exynos5250-clock
>> +          - samsung,exynos5420-clock
>> +          - samsung,exynos5800-clock
>> +      - items:
>> +          - enum:
>> +              - samsung,exynos5420-clock
>> +              - samsung,exynos5800-clock
> 
> Is there a reason these are supported with or without 'syscon'?
> 

Yes, the syscon is optional and needed only by the Exynos5422 DMC driver
(exynos5422-dmc.txt/samsung,exynos5422-dmc.yaml with
samsung,exynos5422-dmc compatible). Without that driver, there is no
need for syscon.


Best regards,
Krzysztof