[PATCH v2 11/20] platform/x86: intel_turbo_max_3: Move to intel sub-directory

[Kate Hsuan]

Move intel_turbo_max_3 to intel sub-directory to improve readability
and rename it from intel_turbo_max_3.c to turbo_max_3.c

Signed-off-by: Kate Hsuan <hpa@xxxxxxxxxx>
---
 drivers/platform/x86/Kconfig                           | 10 ----------
 drivers/platform/x86/Makefile                          |  2 +-
 drivers/platform/x86/intel/Kconfig                     | 10 ++++++++++
 drivers/platform/x86/intel/Makefile                    |  4 ++--
 .../x86/{intel_turbo_max_3.c => intel/turbo_max_3.c}   |  0
 5 files changed, 13 insertions(+), 13 deletions(-)
 rename drivers/platform/x86/{intel_turbo_max_3.c => intel/turbo_max_3.c} (100%)

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index a9eb1f6e184f..666103c7f0de 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -1111,16 +1111,6 @@ config INTEL_IMR
 
 source "drivers/platform/x86/intel_speed_select_if/Kconfig"
 
-config INTEL_TURBO_MAX_3
-	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
-	depends on X86_64 && SCHED_MC_PRIO
-	help
-	  This driver reads maximum performance ratio of each CPU and set up
-	  the scheduler priority metrics. In this way scheduler can prefer
-	  CPU with higher performance to schedule tasks.
-	  This driver is only required when the system is not using Hardware
-	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
-
 config INTEL_UNCORE_FREQ_CONTROL
 	tristate "Intel Uncore frequency control driver"
 	depends on X86_64
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 0389fe12e7c0..fb39644db7f9 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -123,7 +123,7 @@ obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
 
 
 obj-$(CONFIG_INTEL_SPEED_SELECT_INTERFACE)	+= intel_speed_select_if/
-obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
+
 obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 
 
diff --git a/drivers/platform/x86/intel/Kconfig b/drivers/platform/x86/intel/Kconfig
index 83f7dc3e9506..8070804fe916 100644
--- a/drivers/platform/x86/intel/Kconfig
+++ b/drivers/platform/x86/intel/Kconfig
@@ -99,4 +99,14 @@ config INTEL_SMARTCONNECT
 	  Connect enabled, and if so disables it.
 
 
+config INTEL_TURBO_MAX_3
+	bool "Intel Turbo Boost Max Technology 3.0 enumeration driver"
+	depends on X86_64 && SCHED_MC_PRIO
+	help
+	  This driver reads maximum performance ratio of each CPU and set up
+	  the scheduler priority metrics. In this way scheduler can prefer
+	  CPU with higher performance to schedule tasks.
+	  This driver is only required when the system is not using Hardware
+	  P-States (HWP). In HWP mode, priority can be read from ACPI tables.
+
 endif # X86_PLATFORM_DRIVERS_INTEL
diff --git a/drivers/platform/x86/intel/Makefile b/drivers/platform/x86/intel/Makefile
index da8fbe87bf03..cff65fa2b1aa 100644
--- a/drivers/platform/x86/intel/Makefile
+++ b/drivers/platform/x86/intel/Makefile
@@ -33,5 +33,5 @@ intel-rst-y							:= rst.o
 obj-$(CONFIG_INTEL_RST)				+= intel-rst.o
 intel-smartconnect-y				:= smartconnect.o
 obj-$(CONFIG_INTEL_SMARTCONNECT)		+= intel-smartconnect.o
-
-
+intel_turbo_max_3-y						:= turbo_max_3.o
+obj-$(CONFIG_INTEL_TURBO_MAX_3)			+= intel_turbo_max_3.o
diff --git a/drivers/platform/x86/intel_turbo_max_3.c b/drivers/platform/x86/intel/turbo_max_3.c
similarity index 100%
rename from drivers/platform/x86/intel_turbo_max_3.c
rename to drivers/platform/x86/intel/turbo_max_3.c
-- 
2.31.1