[PATCH 3/3] PCI: aardvark: Enable MSI-X support

[Pali Rohár]

According to PCI 3.0 specification, sending both MSI and MSI-X interrupts
is done by DWORD memory write operation to doorbell message address. The
write operation for MSI has zero upper 16 bits and the MSI interrupt number
in the lower 16 bits. The write operation for MSI-X contains a 32-bit value
from MSI-X table.

As driver supports and assigns only interrupt numbers from range 0..31,
enable also MSI-X support.

Testing proved that kernel can correctly receive MSI-X interrupts from PCIe
cards which supports both MSI and MSI-X interrupts.

Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
Reviewed-by: Marek Behún <kabel@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/pci/controller/pci-aardvark.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 96580e1e4539..279b2884c545 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -1161,7 +1161,7 @@ static int advk_pcie_init_msi_irq_domain(struct advk_pcie *pcie)
 
 	msi_di = &pcie->msi_domain_info;
 	msi_di->flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		MSI_FLAG_MULTI_PCI_MSI;
+			MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_PCI_MSIX;
 	msi_di->chip = msi_ic;
 
 	pcie->msi_inner_domain =
-- 
2.20.1