[PATCH v5 3/4] iplink_can: print brp and dbrp bittiming variables

[Vincent Mailhol]

Report the value of the bit-rate prescaler (brp) for both the nominal
and the data bittiming.

Currently, only the constant brp values (brp_{min,max,inc}) are being
reported. Also, brp is the only member of struct can_bittiming not
being reported.

Noticeably, brp is not used as an input for bittiming calculation and
although it could be calculated by hand from the other bittiming
parameters with below formula:

        brp = clock * tq / 1000000000

with clock in hertz and tq in nano second (thus the need of a 1
billion factor to convert it back to second).

But because above formula is not so trivial to remember and is
subjected to rounding errors, it makes sense to directly output
{d,}bpr.

Signed-off-by: Vincent Mailhol <mailhol.vincent@xxxxxxxxxx>
---
 ip/iplink_can.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/ip/iplink_can.c b/ip/iplink_can.c
index 52ba3d12..e438e416 100644
--- a/ip/iplink_can.c
+++ b/ip/iplink_can.c
@@ -336,6 +336,7 @@ static void can_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
 		print_uint(PRINT_ANY, "phase_seg2", " phase-seg2 %u",
 			   bt->phase_seg2);
 		print_uint(PRINT_ANY, "sjw", " sjw %u", bt->sjw);
+		print_uint(PRINT_ANY, "brp", " brp %u", bt->brp);
 		close_json_object();
 	}
 
@@ -411,6 +412,7 @@ static void can_print_opt(struct link_util *lu, FILE *f, struct rtattr *tb[])
 		print_uint(PRINT_ANY, "phase_seg2", " dphase-seg2 %u",
 			   dbt->phase_seg2);
 		print_uint(PRINT_ANY, "sjw", " dsjw %u", dbt->sjw);
+		print_uint(PRINT_ANY, "brp", " dbrp %u", dbt->brp);
 		close_json_object();
 	}
 
-- 
2.31.1