Re: [PATCH 2/2] power: reset: linkstation-poweroff: add new device

[Sebastian Reichel]

Hi,

On Thu, Jun 24, 2021 at 11:18:12AM +0200, Pawel Dembicki wrote:
> This commit introduces support for NETGEAR ReadyNAS Duo v2.
> This device use bit 4 of LED[2:0] Polarity Control Register to indicate
> AC Power loss.
> 
> For more details about AC loss detection in NETGEAR ReadyNAS Duo v2,
> please look at the file:
> RND_5.3.13_WW.src/u-boot/board/mv_feroceon/mv_hal/usibootup/usibootup.c
> from Netgear GPL sources.
> 
> Signed-off-by: Pawel Dembicki <paweldembicki@xxxxxxxxx>
> ---

Thanks, queued.

-- Sebastian

>  drivers/power/reset/linkstation-poweroff.c | 43 ++++++++++++++++++++++
>  1 file changed, 43 insertions(+)
> 
> diff --git a/drivers/power/reset/linkstation-poweroff.c b/drivers/power/reset/linkstation-poweroff.c
> index cb5a32f852c1..5afe3ef23395 100644
> --- a/drivers/power/reset/linkstation-poweroff.c
> +++ b/drivers/power/reset/linkstation-poweroff.c
> @@ -19,6 +19,7 @@
>  #define MII_MARVELL_PHY_PAGE		22
>  
>  #define MII_PHY_LED_CTRL		16
> +#define MII_PHY_LED_POL_CTRL		17
>  #define MII_88E1318S_PHY_LED_TCR	18
>  #define MII_88E1318S_PHY_WOL_CTRL	16
>  #define MII_M1011_IEVENT		19
> @@ -29,6 +30,8 @@
>  #define LED2_FORCE_ON					(0x8 << 8)
>  #define LEDMASK						GENMASK(11,8)
>  
> +#define MII_88E1318S_PHY_LED_POL_LED2		BIT(4)
> +
>  struct power_off_cfg {
>  	char *mdio_node_name;
>  	void (*phy_set_reg)(bool restart);
> @@ -76,11 +79,48 @@ static void linkstation_mvphy_reg_intn(bool restart)
>  		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
>  }
>  
> +static void readynas_mvphy_set_reg(bool restart)
> +{
> +	int rc = 0, saved_page;
> +	u16 data = 0;
> +
> +	if (restart)
> +		data = MII_88E1318S_PHY_LED_POL_LED2;
> +
> +	saved_page = phy_select_page(phydev, MII_MARVELL_LED_PAGE);
> +	if (saved_page < 0)
> +		goto err;
> +
> +	/* Set the LED[2].0 Polarity bit to the required state */
> +	__phy_modify(phydev, MII_PHY_LED_POL_CTRL,
> +		     MII_88E1318S_PHY_LED_POL_LED2, data);
> +
> +	if (!data) {
> +
> +		/* If WOL was enabled and a magic packet was received before powering
> +		 * off, we won't be able to wake up by sending another magic packet.
> +		 * Clear WOL status.
> +		 */
> +		__phy_write(phydev, MII_MARVELL_PHY_PAGE, MII_MARVELL_WOL_PAGE);
> +		__phy_set_bits(phydev, MII_88E1318S_PHY_WOL_CTRL,
> +			       MII_88E1318S_PHY_WOL_CTRL_CLEAR_WOL_STATUS);
> +	}
> +err:
> +	rc = phy_restore_page(phydev, saved_page, rc);
> +	if (rc < 0)
> +		dev_err(&phydev->mdio.dev, "Write register failed, %d\n", rc);
> +}
> +
>  static const struct power_off_cfg linkstation_power_off_cfg = {
>  	.mdio_node_name = "mdio",
>  	.phy_set_reg = linkstation_mvphy_reg_intn,
>  };
>  
> +static const struct power_off_cfg readynas_power_off_cfg = {
> +	.mdio_node_name = "mdio-bus",
> +	.phy_set_reg = readynas_mvphy_set_reg,
> +};
> +
>  static int linkstation_reboot_notifier(struct notifier_block *nb,
>  				       unsigned long action, void *unused)
>  {
> @@ -109,6 +149,9 @@ static const struct of_device_id ls_poweroff_of_match[] = {
>  	{ .compatible = "buffalo,ls421de",
>  	  .data = &linkstation_power_off_cfg,
>  	},
> +	{ .compatible = "netgear,readynas-duo-v2",
> +	  .data = &readynas_power_off_cfg,
> +	},
>  	{ },
>  };
>  
> -- 
> 2.25.1
>

Attachment: signature.asc
Description: PGP signature