[PATCH v2 21/29] iommu/mediatek: Just move code position in hw_init

[Yong Wu]

No functional change too. mt8195 IOMMU support bank functions.
some global control settings are in bank0. and the other banks have
their bank independent setting. Here only move the global control
settings and the independent registers together.

Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
---
 drivers/iommu/mtk_iommu.c | 48 +++++++++++++++++++--------------------
 1 file changed, 24 insertions(+), 24 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 48162e156486..26ac7c4cc3fe 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -750,30 +750,6 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(regval, data->base + REG_MMU_CTRL_REG);
 
-	regval = F_L2_MULIT_HIT_EN |
-		F_TABLE_WALK_FAULT_INT_EN |
-		F_PREETCH_FIFO_OVERFLOW_INT_EN |
-		F_MISS_FIFO_OVERFLOW_INT_EN |
-		F_PREFETCH_FIFO_ERR_INT_EN |
-		F_MISS_FIFO_ERR_INT_EN;
-	writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
-
-	regval = F_INT_TRANSLATION_FAULT |
-		F_INT_MAIN_MULTI_HIT_FAULT |
-		F_INT_INVALID_PA_FAULT |
-		F_INT_ENTRY_REPLACEMENT_FAULT |
-		F_INT_TLB_MISS_FAULT |
-		F_INT_MISS_TRANSACTION_FIFO_FAULT |
-		F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
-	writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
-
-	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
-		regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
-	else
-		regval = lower_32_bits(data->protect_base) |
-			 upper_32_bits(data->protect_base);
-	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
-
 	if (data->enable_4GB &&
 	    MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_VLD_PA_RNG)) {
 		/*
@@ -807,6 +783,30 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
 	}
 	writel_relaxed(regval, data->base + REG_MMU_MISC_CTRL);
 
+	regval = F_L2_MULIT_HIT_EN |
+		F_TABLE_WALK_FAULT_INT_EN |
+		F_PREETCH_FIFO_OVERFLOW_INT_EN |
+		F_MISS_FIFO_OVERFLOW_INT_EN |
+		F_PREFETCH_FIFO_ERR_INT_EN |
+		F_MISS_FIFO_ERR_INT_EN;
+	writel_relaxed(regval, data->base + REG_MMU_INT_CONTROL0);
+
+	regval = F_INT_TRANSLATION_FAULT |
+		F_INT_MAIN_MULTI_HIT_FAULT |
+		F_INT_INVALID_PA_FAULT |
+		F_INT_ENTRY_REPLACEMENT_FAULT |
+		F_INT_TLB_MISS_FAULT |
+		F_INT_MISS_TRANSACTION_FIFO_FAULT |
+		F_INT_PRETETCH_TRANSATION_FIFO_FAULT;
+	writel_relaxed(regval, data->base + REG_MMU_INT_MAIN_CONTROL);
+
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_LEGACY_IVRP_PADDR))
+		regval = (data->protect_base >> 1) | (data->enable_4GB << 31);
+	else
+		regval = lower_32_bits(data->protect_base) |
+			 upper_32_bits(data->protect_base);
+	writel_relaxed(regval, data->base + REG_MMU_IVRP_PADDR);
+
 	if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
 			     dev_name(data->dev), (void *)data)) {
 		writel_relaxed(0, data->base + REG_MMU_PT_BASE_ADDR);
-- 
2.18.0