Re: [PATCH V4 2/4] arm64: dts: sc7280: Add QUPv3 wrapper_0 nodes

[rajpat]

On 2021-07-28 00:50, Stephen Boyd wrote:
> Quoting Rajesh Patil (2021-07-26 06:40:45)
> > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi 
> > b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > index ca6e36b..455e58f 100644
> > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > @@ -520,6 +520,25 @@
> >
> >                 };
> >
> > +               qup_opp_table: qup-opp-table {
>
> Surely this can live underneath a qup node parallel to the i2c and spi
> devices?
But this is common to both qup0 and qup1 right?

> > +                       compatible = "operating-points-v2";
> > +
> > +                       opp-75000000 {
> > +                               opp-hz = /bits/ 64 <75000000>;
> > +                               required-opps = <&rpmhpd_opp_low_svs>;
> > +                       };
> > +
> > +                       opp-100000000 {
> > +                               opp-hz = /bits/ 64 <100000000>;
> > +                               required-opps = <&rpmhpd_opp_svs>;
> > +                       };
> > +
> > +                       opp-128000000 {
> > +                               opp-hz = /bits/ 64 <128000000>;
> > +                               required-opps = <&rpmhpd_opp_nom>;
> > +                       };
> > +               };
> > +
> >                 qupv3_id_0: geniqup@9c0000 {
> >                         compatible = "qcom,geni-se-qup";
> >                         reg = <0 0x009c0000 0 0x2000>;