Re: [PATCH 12/13] mtd: spinand: Perform Power-on-Reset when runtime_pm suspend is issued

From: Miquel Raynal
Date: Fri Aug 06 2021 - 15:12:38 EST


Hi Apurva,

Apurva Nandan <a-nandan@xxxxxx> wrote on Tue, 13 Jul 2021 13:05:37
+0000:

> A soft reset using FFh command doesn't erase the flash's configuration
> and doesn't reset the SPI IO mode also. This can result in the flash
> being in a different SPI IO mode, e.g. Octal DTR, when resuming from
> sleep. This would render the flash in an unusable state.

could put the falsh in?

> Perform a Power-on-Reset (PoR), if available in the flash, when
> suspending the device by runtime_pm. This would set the flash to clean

I think runtime_pm is something else.

> state for reinitialization during resume and would also ensure that it
> is in standard SPI IO mode (1S-1S-1S) before the resume begins.

Please add a comment about this to explain why we don't do this reset
at resume time.

>
> Signed-off-by: Apurva Nandan <a-nandan@xxxxxx>
> ---
> drivers/mtd/nand/spi/core.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
> index 608f4eb85b0a..6fb3aa6af540 100644
> --- a/drivers/mtd/nand/spi/core.c
> +++ b/drivers/mtd/nand/spi/core.c
> @@ -1329,6 +1329,21 @@ static void spinand_mtd_resume(struct mtd_info *mtd)
> spinand_ecc_enable(spinand, false);
> }
>
> +static int spinand_mtd_suspend(struct mtd_info *mtd)
> +{
> + struct spinand_device *spinand = mtd_to_spinand(mtd);
> + int ret;
> +
> + if (!(spinand->flags & SPINAND_HAS_POR_CMD_BIT))
> + return 0;
> +
> + ret = spinand_power_on_rst_op(spinand);
> + if (ret)
> + dev_err(&spinand->spimem->spi->dev, "suspend() failed\n");
> +
> + return ret;
> +}
> +
> static int spinand_init(struct spinand_device *spinand)
> {
> struct device *dev = &spinand->spimem->spi->dev;
> @@ -1401,6 +1416,7 @@ static int spinand_init(struct spinand_device *spinand)
> mtd->_erase = spinand_mtd_erase;
> mtd->_max_bad_blocks = nanddev_mtd_max_bad_blocks;
> mtd->_resume = spinand_mtd_resume;
> + mtd->_suspend = spinand_mtd_suspend;
>
> if (nand->ecc.engine) {
> ret = mtd_ooblayout_count_freebytes(mtd);


Thanks,
Miquèl