Re: [PATCH v8 1/5] cpuidle: qcom_spm: Detach state machine from main SPM handling

From: Bjorn Andersson
Date: Wed Aug 04 2021 - 18:56:12 EST


On Thu 29 Jul 10:56 CDT 2021, AngeloGioacchino Del Regno wrote:

> In commit a871be6b8eee ("cpuidle: Convert Qualcomm SPM driver to a generic
> CPUidle driver") the SPM driver has been converted to a
> generic CPUidle driver: that was mainly made to simplify the
> driver and that was a great accomplishment;
> Though, at that time, this driver was only applicable to ARM 32-bit SoCs,
> lacking logic about the handling of newer generation SAW.
>
> In preparation for the enablement of SPM features on AArch64/ARM64,
> split the cpuidle-qcom-spm driver in two: the CPUIdle related
> state machine (currently used only on ARM SoCs) stays there, while
> the SPM communication handling lands back in soc/qcom/spm.c and
> also making sure to not discard the simplifications that were
> introduced in the aforementioned commit.
>
> Since now the "two drivers" are split, the SCM dependency in the
> main SPM handling is gone and for this reason it was also possible
> to move the SPM initialization early: this will also make sure that
> whenever the SAW CPUIdle driver is getting initialized, the SPM
> driver will be ready to do the job.
>
> Please note that the anticipation of the SPM initialization was
> also done to optimize the boot times on platforms that have their
> CPU/L2 idle states managed by other means (such as PSCI), while
> needing SAW initialization for other purposes, like AVS control.
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
> Reviewed-by: Stephan Gerhold <stephan@xxxxxxxxxxx>
> Tested-by: Stephan Gerhold <stephan@xxxxxxxxxxx>

Rafael, Daniel, any objections to me picking this patch through the qcom
tree?

Regards,
Bjorn

> ---
> drivers/cpuidle/Kconfig.arm | 1 +
> drivers/cpuidle/cpuidle-qcom-spm.c | 318 ++++++-----------------------
> drivers/soc/qcom/Kconfig | 9 +
> drivers/soc/qcom/Makefile | 1 +
> drivers/soc/qcom/spm.c | 212 +++++++++++++++++++
> include/soc/qcom/spm.h | 41 ++++
> 6 files changed, 332 insertions(+), 250 deletions(-)
> create mode 100644 drivers/soc/qcom/spm.c
> create mode 100644 include/soc/qcom/spm.h
>
> diff --git a/drivers/cpuidle/Kconfig.arm b/drivers/cpuidle/Kconfig.arm
> index 334f83e56120..8a02213c8391 100644
> --- a/drivers/cpuidle/Kconfig.arm
> +++ b/drivers/cpuidle/Kconfig.arm
> @@ -112,6 +112,7 @@ config ARM_QCOM_SPM_CPUIDLE
> select CPU_IDLE_MULTIPLE_DRIVERS
> select DT_IDLE_STATES
> select QCOM_SCM
> + select QCOM_SPM
> help
> Select this to enable cpuidle for Qualcomm processors.
> The Subsystem Power Manager (SPM) controls low power modes for the
> diff --git a/drivers/cpuidle/cpuidle-qcom-spm.c b/drivers/cpuidle/cpuidle-qcom-spm.c
> index c0e7971da2da..01e77913a414 100644
> --- a/drivers/cpuidle/cpuidle-qcom-spm.c
> +++ b/drivers/cpuidle/cpuidle-qcom-spm.c
> @@ -18,158 +18,18 @@
> #include <linux/cpuidle.h>
> #include <linux/cpu_pm.h>
> #include <linux/qcom_scm.h>
> +#include <soc/qcom/spm.h>
>
> #include <asm/proc-fns.h>
> #include <asm/suspend.h>
>
> #include "dt_idle_states.h"
>
> -#define MAX_PMIC_DATA 2
> -#define MAX_SEQ_DATA 64
> -#define SPM_CTL_INDEX 0x7f
> -#define SPM_CTL_INDEX_SHIFT 4
> -#define SPM_CTL_EN BIT(0)
> -
> -enum pm_sleep_mode {
> - PM_SLEEP_MODE_STBY,
> - PM_SLEEP_MODE_RET,
> - PM_SLEEP_MODE_SPC,
> - PM_SLEEP_MODE_PC,
> - PM_SLEEP_MODE_NR,
> -};
> -
> -enum spm_reg {
> - SPM_REG_CFG,
> - SPM_REG_SPM_CTL,
> - SPM_REG_DLY,
> - SPM_REG_PMIC_DLY,
> - SPM_REG_PMIC_DATA_0,
> - SPM_REG_PMIC_DATA_1,
> - SPM_REG_VCTL,
> - SPM_REG_SEQ_ENTRY,
> - SPM_REG_SPM_STS,
> - SPM_REG_PMIC_STS,
> - SPM_REG_NR,
> -};
> -
> -struct spm_reg_data {
> - const u8 *reg_offset;
> - u32 spm_cfg;
> - u32 spm_dly;
> - u32 pmic_dly;
> - u32 pmic_data[MAX_PMIC_DATA];
> - u8 seq[MAX_SEQ_DATA];
> - u8 start_index[PM_SLEEP_MODE_NR];
> -};
> -
> -struct spm_driver_data {
> +struct cpuidle_qcom_spm_data {
> struct cpuidle_driver cpuidle_driver;
> - void __iomem *reg_base;
> - const struct spm_reg_data *reg_data;
> -};
> -
> -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
> - [SPM_REG_CFG] = 0x08,
> - [SPM_REG_SPM_CTL] = 0x30,
> - [SPM_REG_DLY] = 0x34,
> - [SPM_REG_SEQ_ENTRY] = 0x80,
> -};
> -
> -/* SPM register data for 8974, 8084 */
> -static const struct spm_reg_data spm_reg_8974_8084_cpu = {
> - .reg_offset = spm_reg_offset_v2_1,
> - .spm_cfg = 0x1,
> - .spm_dly = 0x3C102800,
> - .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
> - 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
> - 0x0F },
> - .start_index[PM_SLEEP_MODE_STBY] = 0,
> - .start_index[PM_SLEEP_MODE_SPC] = 3,
> + struct spm_driver_data *spm;
> };
>
> -/* SPM register data for 8226 */
> -static const struct spm_reg_data spm_reg_8226_cpu = {
> - .reg_offset = spm_reg_offset_v2_1,
> - .spm_cfg = 0x0,
> - .spm_dly = 0x3C102800,
> - .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
> - 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B,
> - 0x80, 0x10, 0x26, 0x30, 0x0F },
> - .start_index[PM_SLEEP_MODE_STBY] = 0,
> - .start_index[PM_SLEEP_MODE_SPC] = 5,
> -};
> -
> -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
> - [SPM_REG_CFG] = 0x08,
> - [SPM_REG_SPM_CTL] = 0x20,
> - [SPM_REG_PMIC_DLY] = 0x24,
> - [SPM_REG_PMIC_DATA_0] = 0x28,
> - [SPM_REG_PMIC_DATA_1] = 0x2C,
> - [SPM_REG_SEQ_ENTRY] = 0x80,
> -};
> -
> -/* SPM register data for 8064 */
> -static const struct spm_reg_data spm_reg_8064_cpu = {
> - .reg_offset = spm_reg_offset_v1_1,
> - .spm_cfg = 0x1F,
> - .pmic_dly = 0x02020004,
> - .pmic_data[0] = 0x0084009C,
> - .pmic_data[1] = 0x00A4001C,
> - .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
> - 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
> - .start_index[PM_SLEEP_MODE_STBY] = 0,
> - .start_index[PM_SLEEP_MODE_SPC] = 2,
> -};
> -
> -static inline void spm_register_write(struct spm_driver_data *drv,
> - enum spm_reg reg, u32 val)
> -{
> - if (drv->reg_data->reg_offset[reg])
> - writel_relaxed(val, drv->reg_base +
> - drv->reg_data->reg_offset[reg]);
> -}
> -
> -/* Ensure a guaranteed write, before return */
> -static inline void spm_register_write_sync(struct spm_driver_data *drv,
> - enum spm_reg reg, u32 val)
> -{
> - u32 ret;
> -
> - if (!drv->reg_data->reg_offset[reg])
> - return;
> -
> - do {
> - writel_relaxed(val, drv->reg_base +
> - drv->reg_data->reg_offset[reg]);
> - ret = readl_relaxed(drv->reg_base +
> - drv->reg_data->reg_offset[reg]);
> - if (ret == val)
> - break;
> - cpu_relax();
> - } while (1);
> -}
> -
> -static inline u32 spm_register_read(struct spm_driver_data *drv,
> - enum spm_reg reg)
> -{
> - return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
> -}
> -
> -static void spm_set_low_power_mode(struct spm_driver_data *drv,
> - enum pm_sleep_mode mode)
> -{
> - u32 start_index;
> - u32 ctl_val;
> -
> - start_index = drv->reg_data->start_index[mode];
> -
> - ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
> - ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
> - ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
> - ctl_val |= SPM_CTL_EN;
> - spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
> -}
> -
> static int qcom_pm_collapse(unsigned long int unused)
> {
> qcom_scm_cpu_power_down(QCOM_SCM_CPU_PWR_DOWN_L2_ON);
> @@ -201,10 +61,10 @@ static int qcom_cpu_spc(struct spm_driver_data *drv)
> static int spm_enter_idle_state(struct cpuidle_device *dev,
> struct cpuidle_driver *drv, int idx)
> {
> - struct spm_driver_data *data = container_of(drv, struct spm_driver_data,
> - cpuidle_driver);
> + struct cpuidle_qcom_spm_data *data = container_of(drv, struct cpuidle_qcom_spm_data,
> + cpuidle_driver);
>
> - return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data);
> + return CPU_PM_CPU_IDLE_ENTER_PARAM(qcom_cpu_spc, idx, data->spm);
> }
>
> static struct cpuidle_driver qcom_spm_idle_driver = {
> @@ -225,134 +85,92 @@ static const struct of_device_id qcom_idle_state_match[] = {
> { },
> };
>
> -static int spm_cpuidle_init(struct cpuidle_driver *drv, int cpu)
> +static int spm_cpuidle_register(struct device *cpuidle_dev, int cpu)
> {
> + struct platform_device *pdev = NULL;
> + struct device_node *cpu_node, *saw_node;
> + struct cpuidle_qcom_spm_data *data = NULL;
> int ret;
>
> - memcpy(drv, &qcom_spm_idle_driver, sizeof(*drv));
> - drv->cpumask = (struct cpumask *)cpumask_of(cpu);
> + cpu_node = of_cpu_device_node_get(cpu);
> + if (!cpu_node)
> + return -ENODEV;
>
> - /* Parse idle states from device tree */
> - ret = dt_init_idle_driver(drv, qcom_idle_state_match, 1);
> - if (ret <= 0)
> - return ret ? : -ENODEV;
> + saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
> + if (!saw_node)
> + return -ENODEV;
>
> - /* We have atleast one power down mode */
> - return qcom_scm_set_warm_boot_addr(cpu_resume_arm, drv->cpumask);
> -}
> + pdev = of_find_device_by_node(saw_node);
> + of_node_put(saw_node);
> + of_node_put(cpu_node);
> + if (!pdev)
> + return -ENODEV;
>
> -static struct spm_driver_data *spm_get_drv(struct platform_device *pdev,
> - int *spm_cpu)
> -{
> - struct spm_driver_data *drv = NULL;
> - struct device_node *cpu_node, *saw_node;
> - int cpu;
> - bool found = 0;
> + data = devm_kzalloc(cpuidle_dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
>
> - for_each_possible_cpu(cpu) {
> - cpu_node = of_cpu_device_node_get(cpu);
> - if (!cpu_node)
> - continue;
> - saw_node = of_parse_phandle(cpu_node, "qcom,saw", 0);
> - found = (saw_node == pdev->dev.of_node);
> - of_node_put(saw_node);
> - of_node_put(cpu_node);
> - if (found)
> - break;
> - }
> + data->spm = dev_get_drvdata(&pdev->dev);
> + if (!data->spm)
> + return -EINVAL;
>
> - if (found) {
> - drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
> - if (drv)
> - *spm_cpu = cpu;
> - }
> + data->cpuidle_driver = qcom_spm_idle_driver;
> + data->cpuidle_driver.cpumask = (struct cpumask *)cpumask_of(cpu);
>
> - return drv;
> -}
> + ret = dt_init_idle_driver(&data->cpuidle_driver,
> + qcom_idle_state_match, 1);
> + if (ret <= 0)
> + return ret ? : -ENODEV;
>
> -static const struct of_device_id spm_match_table[] = {
> - { .compatible = "qcom,msm8226-saw2-v2.1-cpu",
> - .data = &spm_reg_8226_cpu },
> - { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
> - .data = &spm_reg_8974_8084_cpu },
> - { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
> - .data = &spm_reg_8974_8084_cpu },
> - { .compatible = "qcom,apq8064-saw2-v1.1-cpu",
> - .data = &spm_reg_8064_cpu },
> - { },
> -};
> + ret = qcom_scm_set_warm_boot_addr(cpu_resume_arm, cpumask_of(cpu));
> + if (ret)
> + return ret;
> +
> + return cpuidle_register(&data->cpuidle_driver, NULL);
> +}
>
> -static int spm_dev_probe(struct platform_device *pdev)
> +static int spm_cpuidle_drv_probe(struct platform_device *pdev)
> {
> - struct spm_driver_data *drv;
> - struct resource *res;
> - const struct of_device_id *match_id;
> - void __iomem *addr;
> int cpu, ret;
>
> if (!qcom_scm_is_available())
> return -EPROBE_DEFER;
>
> - drv = spm_get_drv(pdev, &cpu);
> - if (!drv)
> - return -EINVAL;
> - platform_set_drvdata(pdev, drv);
> + for_each_possible_cpu(cpu) {
> + ret = spm_cpuidle_register(&pdev->dev, cpu);
> + if (ret && ret != -ENODEV) {
> + dev_err(&pdev->dev,
> + "Cannot register for CPU%d: %d\n", cpu, ret);
> + }
> + }
>
> - res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
> - if (IS_ERR(drv->reg_base))
> - return PTR_ERR(drv->reg_base);
> + return 0;
> +}
>
> - match_id = of_match_node(spm_match_table, pdev->dev.of_node);
> - if (!match_id)
> - return -ENODEV;
> +static struct platform_driver spm_cpuidle_driver = {
> + .probe = spm_cpuidle_drv_probe,
> + .driver = {
> + .name = "qcom-spm-cpuidle",
> + .suppress_bind_attrs = true,
> + },
> +};
>
> - drv->reg_data = match_id->data;
> +static int __init qcom_spm_cpuidle_init(void)
> +{
> + struct platform_device *pdev;
> + int ret;
>
> - ret = spm_cpuidle_init(&drv->cpuidle_driver, cpu);
> + ret = platform_driver_register(&spm_cpuidle_driver);
> if (ret)
> return ret;
>
> - /* Write the SPM sequences first.. */
> - addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
> - __iowrite32_copy(addr, drv->reg_data->seq,
> - ARRAY_SIZE(drv->reg_data->seq) / 4);
> -
> - /*
> - * ..and then the control registers.
> - * On some SoC if the control registers are written first and if the
> - * CPU was held in reset, the reset signal could trigger the SPM state
> - * machine, before the sequences are completely written.
> - */
> - spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
> - spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
> - spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
> - spm_register_write(drv, SPM_REG_PMIC_DATA_0,
> - drv->reg_data->pmic_data[0]);
> - spm_register_write(drv, SPM_REG_PMIC_DATA_1,
> - drv->reg_data->pmic_data[1]);
> -
> - /* Set up Standby as the default low power mode */
> - spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
> -
> - return cpuidle_register(&drv->cpuidle_driver, NULL);
> -}
> -
> -static int spm_dev_remove(struct platform_device *pdev)
> -{
> - struct spm_driver_data *drv = platform_get_drvdata(pdev);
> + pdev = platform_device_register_simple("qcom-spm-cpuidle",
> + -1, NULL, 0);
> + if (IS_ERR(pdev)) {
> + platform_driver_unregister(&spm_cpuidle_driver);
> + return PTR_ERR(pdev);
> + }
>
> - cpuidle_unregister(&drv->cpuidle_driver);
> return 0;
> }
> -
> -static struct platform_driver spm_driver = {
> - .probe = spm_dev_probe,
> - .remove = spm_dev_remove,
> - .driver = {
> - .name = "saw",
> - .of_match_table = spm_match_table,
> - },
> -};
> -
> -builtin_platform_driver(spm_driver);
> +device_initcall(qcom_spm_cpuidle_init);
> diff --git a/drivers/soc/qcom/Kconfig b/drivers/soc/qcom/Kconfig
> index 79b568f82a1c..fe3c486ae32d 100644
> --- a/drivers/soc/qcom/Kconfig
> +++ b/drivers/soc/qcom/Kconfig
> @@ -190,6 +190,15 @@ config QCOM_SOCINFO
> Say yes here to support the Qualcomm socinfo driver, providing
> information about the SoC to user space.
>
> +config QCOM_SPM
> + tristate "Qualcomm Subsystem Power Manager (SPM)"
> + depends on ARCH_QCOM
> + select QCOM_SCM
> + help
> + Enable the support for the Qualcomm Subsystem Power Manager, used
> + to manage cores, L2 low power modes and to configure the internal
> + Adaptive Voltage Scaler parameters, where supported.
> +
> config QCOM_WCNSS_CTRL
> tristate "Qualcomm WCNSS control driver"
> depends on ARCH_QCOM || COMPILE_TEST
> diff --git a/drivers/soc/qcom/Makefile b/drivers/soc/qcom/Makefile
> index ad675a6593d0..24514c722832 100644
> --- a/drivers/soc/qcom/Makefile
> +++ b/drivers/soc/qcom/Makefile
> @@ -20,6 +20,7 @@ obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o
> obj-$(CONFIG_QCOM_SMP2P) += smp2p.o
> obj-$(CONFIG_QCOM_SMSM) += smsm.o
> obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o
> +obj-$(CONFIG_QCOM_SPM) += spm.o
> obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o
> obj-$(CONFIG_QCOM_APR) += apr.o
> obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o
> diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
> new file mode 100644
> index 000000000000..d5ba0b5488fc
> --- /dev/null
> +++ b/drivers/soc/qcom/spm.c
> @@ -0,0 +1,212 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2014,2015, Linaro Ltd.
> + *
> + * SAW power controller driver
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/io.h>
> +#include <linux/slab.h>
> +#include <linux/of.h>
> +#include <linux/of_address.h>
> +#include <linux/of_device.h>
> +#include <linux/err.h>
> +#include <linux/platform_device.h>
> +#include <soc/qcom/spm.h>
> +
> +#define SPM_CTL_INDEX 0x7f
> +#define SPM_CTL_INDEX_SHIFT 4
> +#define SPM_CTL_EN BIT(0)
> +
> +enum spm_reg {
> + SPM_REG_CFG,
> + SPM_REG_SPM_CTL,
> + SPM_REG_DLY,
> + SPM_REG_PMIC_DLY,
> + SPM_REG_PMIC_DATA_0,
> + SPM_REG_PMIC_DATA_1,
> + SPM_REG_VCTL,
> + SPM_REG_SEQ_ENTRY,
> + SPM_REG_SPM_STS,
> + SPM_REG_PMIC_STS,
> + SPM_REG_NR,
> +};
> +
> +static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
> + [SPM_REG_CFG] = 0x08,
> + [SPM_REG_SPM_CTL] = 0x30,
> + [SPM_REG_DLY] = 0x34,
> + [SPM_REG_SEQ_ENTRY] = 0x80,
> +};
> +
> +/* SPM register data for 8974, 8084 */
> +static const struct spm_reg_data spm_reg_8974_8084_cpu = {
> + .reg_offset = spm_reg_offset_v2_1,
> + .spm_cfg = 0x1,
> + .spm_dly = 0x3C102800,
> + .seq = { 0x03, 0x0B, 0x0F, 0x00, 0x20, 0x80, 0x10, 0xE8, 0x5B, 0x03,
> + 0x3B, 0xE8, 0x5B, 0x82, 0x10, 0x0B, 0x30, 0x06, 0x26, 0x30,
> + 0x0F },
> + .start_index[PM_SLEEP_MODE_STBY] = 0,
> + .start_index[PM_SLEEP_MODE_SPC] = 3,
> +};
> +
> +/* SPM register data for 8226 */
> +static const struct spm_reg_data spm_reg_8226_cpu = {
> + .reg_offset = spm_reg_offset_v2_1,
> + .spm_cfg = 0x0,
> + .spm_dly = 0x3C102800,
> + .seq = { 0x60, 0x03, 0x60, 0x0B, 0x0F, 0x20, 0x10, 0x80, 0x30, 0x90,
> + 0x5B, 0x60, 0x03, 0x60, 0x3B, 0x76, 0x76, 0x0B, 0x94, 0x5B,
> + 0x80, 0x10, 0x26, 0x30, 0x0F },
> + .start_index[PM_SLEEP_MODE_STBY] = 0,
> + .start_index[PM_SLEEP_MODE_SPC] = 5,
> +};
> +
> +static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
> + [SPM_REG_CFG] = 0x08,
> + [SPM_REG_SPM_CTL] = 0x20,
> + [SPM_REG_PMIC_DLY] = 0x24,
> + [SPM_REG_PMIC_DATA_0] = 0x28,
> + [SPM_REG_PMIC_DATA_1] = 0x2C,
> + [SPM_REG_SEQ_ENTRY] = 0x80,
> +};
> +
> +/* SPM register data for 8064 */
> +static const struct spm_reg_data spm_reg_8064_cpu = {
> + .reg_offset = spm_reg_offset_v1_1,
> + .spm_cfg = 0x1F,
> + .pmic_dly = 0x02020004,
> + .pmic_data[0] = 0x0084009C,
> + .pmic_data[1] = 0x00A4001C,
> + .seq = { 0x03, 0x0F, 0x00, 0x24, 0x54, 0x10, 0x09, 0x03, 0x01,
> + 0x10, 0x54, 0x30, 0x0C, 0x24, 0x30, 0x0F },
> + .start_index[PM_SLEEP_MODE_STBY] = 0,
> + .start_index[PM_SLEEP_MODE_SPC] = 2,
> +};
> +
> +static inline void spm_register_write(struct spm_driver_data *drv,
> + enum spm_reg reg, u32 val)
> +{
> + if (drv->reg_data->reg_offset[reg])
> + writel_relaxed(val, drv->reg_base +
> + drv->reg_data->reg_offset[reg]);
> +}
> +
> +/* Ensure a guaranteed write, before return */
> +static inline void spm_register_write_sync(struct spm_driver_data *drv,
> + enum spm_reg reg, u32 val)
> +{
> + u32 ret;
> +
> + if (!drv->reg_data->reg_offset[reg])
> + return;
> +
> + do {
> + writel_relaxed(val, drv->reg_base +
> + drv->reg_data->reg_offset[reg]);
> + ret = readl_relaxed(drv->reg_base +
> + drv->reg_data->reg_offset[reg]);
> + if (ret == val)
> + break;
> + cpu_relax();
> + } while (1);
> +}
> +
> +static inline u32 spm_register_read(struct spm_driver_data *drv,
> + enum spm_reg reg)
> +{
> + return readl_relaxed(drv->reg_base + drv->reg_data->reg_offset[reg]);
> +}
> +
> +void spm_set_low_power_mode(struct spm_driver_data *drv,
> + enum pm_sleep_mode mode)
> +{
> + u32 start_index;
> + u32 ctl_val;
> +
> + start_index = drv->reg_data->start_index[mode];
> +
> + ctl_val = spm_register_read(drv, SPM_REG_SPM_CTL);
> + ctl_val &= ~(SPM_CTL_INDEX << SPM_CTL_INDEX_SHIFT);
> + ctl_val |= start_index << SPM_CTL_INDEX_SHIFT;
> + ctl_val |= SPM_CTL_EN;
> + spm_register_write_sync(drv, SPM_REG_SPM_CTL, ctl_val);
> +}
> +
> +static const struct of_device_id spm_match_table[] = {
> + { .compatible = "qcom,msm8226-saw2-v2.1-cpu",
> + .data = &spm_reg_8226_cpu },
> + { .compatible = "qcom,msm8974-saw2-v2.1-cpu",
> + .data = &spm_reg_8974_8084_cpu },
> + { .compatible = "qcom,apq8084-saw2-v2.1-cpu",
> + .data = &spm_reg_8974_8084_cpu },
> + { .compatible = "qcom,apq8064-saw2-v1.1-cpu",
> + .data = &spm_reg_8064_cpu },
> + { },
> +};
> +
> +static int spm_dev_probe(struct platform_device *pdev)
> +{
> + const struct of_device_id *match_id;
> + struct spm_driver_data *drv;
> + struct resource *res;
> + void __iomem *addr;
> +
> + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_KERNEL);
> + if (!drv)
> + return -ENOMEM;
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + drv->reg_base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(drv->reg_base))
> + return PTR_ERR(drv->reg_base);
> +
> + match_id = of_match_node(spm_match_table, pdev->dev.of_node);
> + if (!match_id)
> + return -ENODEV;
> +
> + drv->reg_data = match_id->data;
> + platform_set_drvdata(pdev, drv);
> +
> + /* Write the SPM sequences first.. */
> + addr = drv->reg_base + drv->reg_data->reg_offset[SPM_REG_SEQ_ENTRY];
> + __iowrite32_copy(addr, drv->reg_data->seq,
> + ARRAY_SIZE(drv->reg_data->seq) / 4);
> +
> + /*
> + * ..and then the control registers.
> + * On some SoC if the control registers are written first and if the
> + * CPU was held in reset, the reset signal could trigger the SPM state
> + * machine, before the sequences are completely written.
> + */
> + spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
> + spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
> + spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
> + spm_register_write(drv, SPM_REG_PMIC_DATA_0,
> + drv->reg_data->pmic_data[0]);
> + spm_register_write(drv, SPM_REG_PMIC_DATA_1,
> + drv->reg_data->pmic_data[1]);
> +
> + /* Set up Standby as the default low power mode */
> + spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
> +
> + return 0;
> +}
> +
> +static struct platform_driver spm_driver = {
> + .probe = spm_dev_probe,
> + .driver = {
> + .name = "qcom_spm",
> + .of_match_table = spm_match_table,
> + },
> +};
> +
> +static int __init qcom_spm_init(void)
> +{
> + return platform_driver_register(&spm_driver);
> +}
> +arch_initcall(qcom_spm_init);
> diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h
> new file mode 100644
> index 000000000000..4c7e5ac2583d
> --- /dev/null
> +++ b/include/soc/qcom/spm.h
> @@ -0,0 +1,41 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * Copyright (c) 2011-2014, The Linux Foundation. All rights reserved.
> + * Copyright (c) 2014,2015, Linaro Ltd.
> + */
> +
> +#ifndef __SPM_H__
> +#define __SPM_H__
> +
> +#include <linux/cpuidle.h>
> +
> +#define MAX_PMIC_DATA 2
> +#define MAX_SEQ_DATA 64
> +
> +enum pm_sleep_mode {
> + PM_SLEEP_MODE_STBY,
> + PM_SLEEP_MODE_RET,
> + PM_SLEEP_MODE_SPC,
> + PM_SLEEP_MODE_PC,
> + PM_SLEEP_MODE_NR,
> +};
> +
> +struct spm_reg_data {
> + const u8 *reg_offset;
> + u32 spm_cfg;
> + u32 spm_dly;
> + u32 pmic_dly;
> + u32 pmic_data[MAX_PMIC_DATA];
> + u8 seq[MAX_SEQ_DATA];
> + u8 start_index[PM_SLEEP_MODE_NR];
> +};
> +
> +struct spm_driver_data {
> + void __iomem *reg_base;
> + const struct spm_reg_data *reg_data;
> +};
> +
> +void spm_set_low_power_mode(struct spm_driver_data *drv,
> + enum pm_sleep_mode mode);
> +
> +#endif /* __SPM_H__ */
> --
> 2.32.0
>