[PATCH 6/8] staging: r8188eu: remove RT_TRACE calls from hal/rtl8188e_mp.c
From: Phillip Potter
Date: Tue Aug 03 2021 - 19:05:54 EST
Remove RT_TRACE macro calls from hal/rtl8188e_mp.c, so that ultimately the
macro definition itself can eventually be removed.
Signed-off-by: Phillip Potter <phil@xxxxxxxxxxxxxxxx>
---
drivers/staging/r8188eu/hal/rtl8188e_mp.c | 43 +++--------------------
1 file changed, 4 insertions(+), 39 deletions(-)
diff --git a/drivers/staging/r8188eu/hal/rtl8188e_mp.c b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
index 510906cc6007..8f3cccfc23f4 100644
--- a/drivers/staging/r8188eu/hal/rtl8188e_mp.c
+++ b/drivers/staging/r8188eu/hal/rtl8188e_mp.c
@@ -13,17 +13,11 @@ s32 Hal_SetPowerTracking(struct adapter *padapter, u8 enable)
struct hal_data_8188e *pHalData = GET_HAL_DATA(padapter);
struct odm_dm_struct *pDM_Odm = &(pHalData->odmpriv);
- if (!netif_running(padapter->pnetdev)) {
- RT_TRACE(_module_mp_, _drv_warning_,
- ("SetPowerTracking! Fail: interface not opened!\n"));
+ if (!netif_running(padapter->pnetdev))
return _FAIL;
- }
- if (!check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE)) {
- RT_TRACE(_module_mp_, _drv_warning_,
- ("SetPowerTracking! Fail: not in MP mode!\n"));
+ if (!check_fwstate(&padapter->mlmepriv, WIFI_MP_STATE))
return _FAIL;
- }
if (enable)
pDM_Odm->RFCalibrateInfo.bTXPowerTracking = true;
@@ -262,10 +256,6 @@ void Hal_SetCCKTxPower(struct adapter *pAdapter, u8 *TxPower)
write_bbreg(pAdapter, rTxAGC_B_CCK11_A_CCK2_11, bMaskByte0, TxPower[RF_PATH_B]);
tmpval = (TxPower[RF_PATH_B]<<16) | (TxPower[RF_PATH_B]<<8) | TxPower[RF_PATH_B];
write_bbreg(pAdapter, rTxAGC_B_CCK1_55_Mcs32, 0xffffff00, tmpval);
-
- RT_TRACE(_module_mp_, _drv_notice_,
- ("-SetCCKTxPower: A[0x%02x] B[0x%02x]\n",
- TxPower[RF_PATH_A], TxPower[RF_PATH_B]));
}
void Hal_SetOFDMTxPower(struct adapter *pAdapter, u8 *TxPower)
@@ -514,23 +504,17 @@ void Hal_SetAntenna(struct adapter *pAdapter)
break;
}
}
-
- RT_TRACE(_module_mp_, _drv_notice_, ("-SwitchAntenna: finished\n"));
}
s32 Hal_SetThermalMeter(struct adapter *pAdapter, u8 target_ther)
{
struct hal_data_8188e *pHalData = GET_HAL_DATA(pAdapter);
- if (!netif_running(pAdapter->pnetdev)) {
- RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter! Fail: interface not opened!\n"));
+ if (!netif_running(pAdapter->pnetdev))
return _FAIL;
- }
- if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false) {
- RT_TRACE(_module_mp_, _drv_warning_, ("SetThermalMeter: Fail! not in MP mode!\n"));
+ if (check_fwstate(&pAdapter->mlmepriv, WIFI_MP_STATE) == false)
return _FAIL;
- }
target_ther &= 0xff;
if (target_ther < 0x07)
@@ -568,7 +552,6 @@ void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart)
pAdapter->mppriv.MptCtx.bSingleCarrier = bStart;
if (bStart) {
/* Start Single Carrier. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test start\n"));
/* 1. if OFDM block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
@@ -586,8 +569,6 @@ void Hal_SetSingleCarrierTx(struct adapter *pAdapter, u8 bStart)
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {
/* Stop Single Carrier. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleCarrierTx: test stop\n"));
-
/* Turn off all test modes. */
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
@@ -627,7 +608,6 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
pAdapter->mppriv.MptCtx.bSingleTone = bStart;
if (bStart) {
/* Start Single Tone. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test start\n"));
/* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
reg58 = PHY_QueryRFReg(pAdapter, RF_PATH_A, LNA_Low_Gain_3, bRFRegOffsetMask);
@@ -660,8 +640,6 @@ void Hal_SetSingleToneTx(struct adapter *pAdapter, u8 bStart)
} else {
/* Stop Single Tone. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetSingleToneTx: test stop\n"));
-
/* <20120326, Kordan> To amplify the power of tone for Xtal calibration. (asked by Edlu) */
/* <20120326, Kordan> Only in single tone mode. (asked by Edlu) */
if (IS_HARDWARE_TYPE_8188E(pAdapter)) {
@@ -695,7 +673,6 @@ void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart)
pAdapter->mppriv.MptCtx.bCarrierSuppression = bStart;
if (bStart) {
/* Start Carrier Suppression. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test start\n"));
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
/* 1. if CCK block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
@@ -718,7 +695,6 @@ void Hal_SetCarrierSuppressionTx(struct adapter *pAdapter, u8 bStart)
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {
/* Stop Carrier Suppression. */
- RT_TRACE(_module_mp_, _drv_alert_, ("SetCarrierSuppressionTx: test stop\n"));
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M) {
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, 0x1); /* turn on scramble setting */
@@ -739,9 +715,6 @@ void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart)
u32 cckrate;
if (bStart) {
- RT_TRACE(_module_mp_, _drv_alert_,
- ("SetCCKContinuousTx: test start\n"));
-
/* 1. if CCK block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bCCKEn, bEnable);/* set CCK block on */
@@ -760,9 +733,6 @@ void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart)
write_bbreg(pAdapter, rFPGA0_XA_HSSIParameter1, bMaskDWord, 0x01000500);
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {
- RT_TRACE(_module_mp_, _drv_info_,
- ("SetCCKContinuousTx: test stop\n"));
-
write_bbreg(pAdapter, rCCK0_System, bCCKBBMode, 0x0); /* normal mode */
write_bbreg(pAdapter, rCCK0_System, bCCKScramble, bEnable); /* turn on scramble setting */
@@ -782,7 +752,6 @@ void Hal_SetCCKContinuousTx(struct adapter *pAdapter, u8 bStart)
void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart)
{
if (bStart) {
- RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test start\n"));
/* 1. if OFDM block on? */
if (!read_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn))
write_bbreg(pAdapter, rFPGA0_RFMOD, bOFDMEn, bEnable);/* set OFDM block on */
@@ -802,7 +771,6 @@ void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart)
write_bbreg(pAdapter, rFPGA0_XB_HSSIParameter1, bMaskDWord, 0x01000500);
} else {
- RT_TRACE(_module_mp_, _drv_info_, ("SetOFDMContinuousTx: test stop\n"));
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMContinueTx, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleCarrier, bDisable);
write_bbreg(pAdapter, rOFDM1_LSTF, bOFDMSingleTone, bDisable);
@@ -823,9 +791,6 @@ void Hal_SetOFDMContinuousTx(struct adapter *pAdapter, u8 bStart)
void Hal_SetContinuousTx(struct adapter *pAdapter, u8 bStart)
{
- RT_TRACE(_module_mp_, _drv_info_,
- ("SetContinuousTx: rate:%d\n", pAdapter->mppriv.rateidx));
-
pAdapter->mppriv.MptCtx.bStartContTx = bStart;
if (pAdapter->mppriv.rateidx <= MPT_RATE_11M)
Hal_SetCCKContinuousTx(pAdapter, bStart);
--
2.31.1