Re: [PATCH v2] arm64: dts: imx8mp: Add dsp node

From: Shawn Guo
Date: Fri Jul 23 2021 - 04:02:12 EST


On Fri, Jul 16, 2021 at 03:47:19PM +0300, Daniel Baluta wrote:
> From: Daniel Baluta <daniel.baluta@xxxxxxx>
>
> i.MX8 MPlus SoC integrates Cadence HIFI4 DSP. This core runs either a
> custom firmware or the open source SOF firmware [1]
>
> DSP device is handled by SOF OF driver found in
> sound/soc/sof/sof-of-dev.c
>
> Notice that the DSP node makes use of:
> - dsp_reserved, a reserved memory region for various Audio
> resources (e.g firmware loading, audio buffers, etc).
> - Messaging Unit (mu2) for passing notifications betweem ARM
> core and DSP.
>
> [1] https://thesofproject.github.io/latest/platforms/index.html
> Signed-off-by: Daniel Baluta <daniel.baluta@xxxxxxx>
> ---
> Changes since v1:
> * mark MU2 node as disabled, because mu2 clock support is not yet upstream.
>
> arch/arm64/boot/dts/freescale/imx8mp.dtsi | 29 +++++++++++++++++++++++
> 1 file changed, 29 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> index 9f7c7f587d38..fb0ac85c8473 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
> @@ -135,6 +135,17 @@ clk_ext4: clock-ext4 {
> clock-output-names = "clk_ext4";
> };
>
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + dsp_reserved: dsp@92400000 {
> + reg = <0 0x92400000 0 0x2000000>;
> + no-map;
> + };
> + };
> +
> pmu {
> compatible = "arm,cortex-a53-pmu";
> interrupts = <GIC_PPI 7
> @@ -698,6 +709,14 @@ mu: mailbox@30aa0000 {
> #mbox-cells = <2>;
> };
>
> + mu2: mailbox@30e60000 {
> + compatible = "fsl,imx8mp-mu", "fsl,imx6sx-mu";
> + reg = <0x30e60000 0x10000>;
> + interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
> + #mbox-cells = <2>;
> + status = "disabled";
> + };
> +
> i2c5: i2c@30ad0000 {
> compatible = "fsl,imx8mp-i2c", "fsl,imx21-i2c";
> #address-cells = <1>;
> @@ -938,5 +957,15 @@ usb_dwc3_1: usb@38200000 {
> snps,dis-u2-freeclk-exists-quirk;
> };
> };
> + dsp: dsp@3b6e8000 {

Please have a newline between nodes.

Shawn

> + compatible = "fsl,imx8mp-dsp";
> + reg = <0x3b6e8000 0x88000>;
> + mbox-names = "txdb0", "txdb1",
> + "rxdb0", "rxdb1";
> + mboxes = <&mu2 2 0>, <&mu2 2 1>,
> + <&mu2 3 0>, <&mu2 3 1>;
> + memory-region = <&dsp_reserved>;
> + status = "disabled";
> + };
> };
> };
> --
> 2.27.0
>