[PATCH v7 00/10] Add support for Hikey 970 PCIe

From: Mauro Carvalho Chehab
Date: Wed Jul 21 2021 - 04:56:17 EST


This series depends on this one:
https://lore.kernel.org/lkml/cover.1626515862.git.mchehab+huawei@xxxxxxxxxx/

It is available, with its patch dependencies against v5.14-rc1 at:
https://github.com/mchehab/linux/commits/pcie-alternate

This series add support at the pcie-kirin dirver for it to use a separate PHY driver.

Yet, in order to preserve the existing DT schema for Kirin 960, it keeps the
Kirin 960 PHY inside the pci driver. I tried to find a way to split it while keeping
the DT schema backward-compatible, but currently the PHY core doesn't allow
that, as it relies on a "phy" property at the pcie node in order to recognize the
PHY driver.

Once the pci-kiring is modified to support an external PHY driver, add a
Kirin 970 PHY and add the needed properties for the HiKey 970 board to
detect the PCIe.

It should be noticed that the HiKey 970 design uses 4 different GPIO pins, one
for each PERST# signal for each PCIe bus device:

- GPIO 56 has a pullup logic from 1V8 to 2V5
connected to a PCIe bridge chip (PEX 8606);
- GPIO 25 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the M.2 slot;
- GPIO 220 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the PCIe mini slot;
- GPIO 203 has a pullup logic from 1V8 to 3V3
connected to the PERST# pin at the Ethernet chipset.

At the first versions, those were mapped as part of the pci-bus, but the
pci-bus.yaml schema only allows a single PERST# GPIO. So, on v5, those
were moved to the PHY DT schema. However, as Rob complained, on this
version, I opted to add a separate patch (the last one) that moves those
back to the PCIe of-node.

If such patch 09/09 is accepted, then this patch for the DT schema should
also be accepted:

https://github.com/devicetree-org/dt-schema/pull/56

Tested on Hikey970:

$ lspci
00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3670 (rev 01)
01:00.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:01.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:04.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:05.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:07.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
02:09.0 PCI bridge: PLX Technology, Inc. PEX 8606 6 Lane, 6 Port PCI Express Gen 2 (5.0 GT/s) Switch (rev ba)
06:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07)

$ ethtool enp6s0
Settings for enp6s0:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Advertised pause frame use: Symmetric Receive-only
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Auto-negotiation: on
master-slave cfg: preferred slave
master-slave status: slave
Port: Twisted Pair
PHYAD: 0
Transceiver: external
MDI-X: Unknown
netlink error: Operation not permitted
Link detected: yes

Also tested that Hikey 960 keeps being supported:

$ lspci
00:00.0 PCI bridge: Huawei Technologies Co., Ltd. Device 3660 (rev 01)

---

v7:
- Moved kirin_pcie_match to be closer to the probe function;
- Improved patch description for:
"PCI: kirin: add support for a PHY layer"
- Added missing MODULE_*() macros on both PCI and PHY drivers;
- Fixed a warning at hisilicon,phy-hi3670-pcie.yaml reported by
Rob Herring's bot.

v6:
- Use an alternative approach, in order to keep the Kirin 960 PHY internal to
the driver, in order to not break the DT schema. The PHY-specific code
were made self-contained at pcie-kirin, in order to make easier to split
it in the future, if needed.

v5:
- added "static" to hi3670_pcie_get_eyeparam() declaration on patch 6/8

v4:

- dropped the DTS patch, as it depends on a PMIC-related patch series;
- minor changes at the patch description;
- HiKey and HiSilicon are now using the preferred CamelCase format.


Manivannan Sadhasivam (1):
arm64: dts: HiSilicon: Add support for HiKey 970 PCIe controller
hardware

Mauro Carvalho Chehab (9):
PCI: kirin: Reorganize the PHY logic inside the driver
PCI: kirin: Add support for a PHY layer
PCI: kirin: Use regmap for APB registers
PCI: kirin: Add MODULE_* macros
dt-bindings: PCI: kirin: Fix compatible string
dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY
phy: HiSilicon: Add driver for Kirin 970 PCIe PHY
dt-bindings: PCI: kirin-pcie.txt: Convert it to yaml
phy-hi3670-pcie: Move reset-gpios to the PCIe DT schema

.../bindings/pci/hisilicon,kirin-pcie.yaml | 87 ++
.../devicetree/bindings/pci/kirin-pcie.txt | 50 -
.../devicetree/bindings/pci/snps,dw-pcie.yaml | 2 +-
.../phy/hisilicon,phy-hi3670-pcie.yaml | 88 ++
MAINTAINERS | 2 +-
arch/arm64/boot/dts/hisilicon/hi3670.dtsi | 70 ++
.../boot/dts/hisilicon/hikey970-pmic.dtsi | 1 -
drivers/pci/controller/dwc/pcie-kirin.c | 413 +++++---
drivers/phy/hisilicon/Kconfig | 10 +
drivers/phy/hisilicon/Makefile | 1 +
drivers/phy/hisilicon/phy-hi3670-pcie.c | 902 ++++++++++++++++++
11 files changed, 1429 insertions(+), 197 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
create mode 100644 drivers/phy/hisilicon/phy-hi3670-pcie.c

--
2.31.1