Re: [PATCH v6 1/2] iio: frequency: adrf6780: add support for ADRF6780

From: Jonathan Cameron
Date: Sat Jul 17 2021 - 09:56:38 EST


On Fri, 16 Jul 2021 14:42:09 +0300
Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx> wrote:

> The ADRF6780 is a silicon germanium (SiGe) design, wideband,
> microwave upconverter optimized for point to point microwave
> radio designs operating in the 5.9 GHz to 23.6 GHz frequency
> range.
>
> Datasheet:
> https://www.analog.com/media/en/technical-documentation/data-sheets/ADRF6780.pdf
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx>

Hmm. I didn't really take my time to read the datasheet properly until now
so wasn't totally sure what this device is doing. Sorry about that!

Anyhow, I'd definitely likes some descriptive comments or stuff in the
patch description to explain what the channels are actually mapping to.
This is a rather different device than most of the frequency related
devices we've seen before.

I 'think' there is effectively only one output channel for this device
and the things about it we can control are
"phase" indirectly by tweaking the phase of the LO path.

The linearize control doesn't seem to be directly related the scale of
any channel, so not sure that's appropriate to map that way.

The ADC is not reading a voltage as is specified here, but rather something
that is almost linearly related to RF output power in dBm.

Perhaps if you give a listing of the resulting sysfs ABI and what it
controls here in the patch description of v7 we can see if we can figure
out a more appropriate mapping to existing ABI (or extension of the defined
ABI if necessary). I'm not totally convinced all the stuff in device tree
belongs there either - the LO x2 for example feels like it might be
more appropriate exposed to userspace in some fashion (it was this that
got me spending the time to work out what the device actually does!)


Jonathan




> ---
> changes in v6:
> - fix warning detected by kernel test robot
> drivers/iio/frequency/Kconfig | 12 +
> drivers/iio/frequency/Makefile | 1 +
> drivers/iio/frequency/adrf6780.c | 474 +++++++++++++++++++++++++++++++
> 3 files changed, 487 insertions(+)
> create mode 100644 drivers/iio/frequency/adrf6780.c
>
> diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig
> index 240b81502512..2c9e0559e8a4 100644
> --- a/drivers/iio/frequency/Kconfig
> +++ b/drivers/iio/frequency/Kconfig
> @@ -49,5 +49,17 @@ config ADF4371
>
> To compile this driver as a module, choose M here: the
> module will be called adf4371.
> +
> +config ADRF6780
> + tristate "Analog Devices ADRF6780 Microwave Upconverter"
> + depends on SPI
> + depends on COMMON_CLK
> + help
> + Say yes here to build support for Analog Devices ADRF6780
> + 5.9 GHz to 23.6 GHz, Wideband, Microwave Upconverter.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called adrf6780.
> +
> endmenu
> endmenu
> diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile
> index 518b1e50caef..ae3136c79202 100644
> --- a/drivers/iio/frequency/Makefile
> +++ b/drivers/iio/frequency/Makefile
> @@ -7,3 +7,4 @@
> obj-$(CONFIG_AD9523) += ad9523.o
> obj-$(CONFIG_ADF4350) += adf4350.o
> obj-$(CONFIG_ADF4371) += adf4371.o
> +obj-$(CONFIG_ADRF6780) += adrf6780.o
> diff --git a/drivers/iio/frequency/adrf6780.c b/drivers/iio/frequency/adrf6780.c
> new file mode 100644
> index 000000000000..6643dbc541c7
> --- /dev/null
> +++ b/drivers/iio/frequency/adrf6780.c
> @@ -0,0 +1,474 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * ADRF6780 driver
> + *
> + * Copyright 2021 Analog Devices Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/bits.h>
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/clk-provider.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +#include <linux/mod_devicetable.h>
> +#include <linux/spi/spi.h>
> +
> +#include <asm/unaligned.h>
> +
> +/* ADRF6780 Register Map */
> +#define ADRF6780_REG_CONTROL 0x00
> +#define ADRF6780_REG_ALARM_READBACK 0x01
> +#define ADRF6780_REG_ALARM_MASKS 0x02
> +#define ADRF6780_REG_ENABLE 0x03
> +#define ADRF6780_REG_LINEARIZE 0x04
> +#define ADRF6780_REG_LO_PATH 0x05
> +#define ADRF6780_REG_ADC_CONTROL 0x06
> +#define ADRF6780_REG_ADC_OUTPUT 0x0C
> +
> +/* ADRF6780_REG_CONTROL Map */
> +#define ADRF6780_PARITY_EN_MSK BIT(15)
> +#define ADRF6780_SOFT_RESET_MSK BIT(14)
> +#define ADRF6780_CHIP_ID_MSK GENMASK(11, 4)
> +#define ADRF6780_CHIP_ID 0xA
> +#define ADRF6780_CHIP_REVISION_MSK GENMASK(3, 0)
> +
> +/* ADRF6780_REG_ALARM_READBACK Map */
> +#define ADRF6780_PARITY_ERROR_MSK BIT(15)
> +#define ADRF6780_TOO_FEW_ERRORS_MSK BIT(14)
> +#define ADRF6780_TOO_MANY_ERRORS_MSK BIT(13)
> +#define ADRF6780_ADDRESS_RANGE_ERROR_MSK BIT(12)
> +
> +/* ADRF6780_REG_ENABLE Map */
> +#define ADRF6780_VGA_BUFFER_EN_MSK BIT(8)
> +#define ADRF6780_DETECTOR_EN_MSK BIT(7)
> +#define ADRF6780_LO_BUFFER_EN_MSK BIT(6)
> +#define ADRF6780_IF_MODE_EN_MSK BIT(5)
> +#define ADRF6780_IQ_MODE_EN_MSK BIT(4)
> +#define ADRF6780_LO_X2_EN_MSK BIT(3)
> +#define ADRF6780_LO_PPF_EN_MSK BIT(2)
> +#define ADRF6780_LO_EN_MSK BIT(1)
> +#define ADRF6780_UC_BIAS_EN_MSK BIT(0)
> +
> +/* ADRF6780_REG_LINEARIZE Map */
> +#define ADRF6780_RDAC_LINEARIZE_MSK GENMASK(7, 0)
> +
> +/* ADRF6780_REG_LO_PATH Map */
> +#define ADRF6780_LO_SIDEBAND_MSK BIT(10)
> +#define ADRF6780_Q_PATH_PHASE_ACCURACY_MSK GENMASK(7, 4)
> +#define ADRF6780_I_PATH_PHASE_ACCURACY_MSK GENMASK(3, 0)
> +
> +/* ADRF6780_REG_ADC_CONTROL Map */
> +#define ADRF6780_VDET_OUTPUT_SELECT_MSK BIT(3)
> +#define ADRF6780_ADC_START_MSK BIT(2)
> +#define ADRF6780_ADC_EN_MSK BIT(1)
> +#define ADRF6780_ADC_CLOCK_EN_MSK BIT(0)
> +
> +/* ADRF6780_REG_ADC_OUTPUT Map */
> +#define ADRF6780_ADC_STATUS_MSK BIT(8)
> +#define ADRF6780_ADC_VALUE_MSK GENMASK(7, 0)
> +
> +struct adrf6780_dev {
> + struct spi_device *spi;
> + struct clk *clkin;
> + /* Protect against concurrent accesses to the device */
> + struct mutex lock;
> + bool vga_buff_en;
> + bool lo_buff_en;
> + bool if_mode_en;
> + bool iq_mode_en;
> + bool lo_x2_en;
> + bool lo_ppf_en;
> + bool lo_en;
> + bool uc_bias_en;
> + bool lo_sideband;
> + bool vdet_out_en;
> + u8 data[3] ____cacheline_aligned;
> +};
> +
> +static int adrf6780_spi_read(struct adrf6780_dev *dev, unsigned int reg,
> + unsigned int *val)
> +{
> + int ret;
> + struct spi_transfer t = {0};
> +
> + dev->data[0] = 0x80 | (reg << 1);
> + dev->data[1] = 0x0;
> + dev->data[2] = 0x0;
> +
> + t.rx_buf = &dev->data[0];
> + t.tx_buf = &dev->data[0];
> + t.len = 3;
> +
> + ret = spi_sync_transfer(dev->spi, &t, 1);
> + if (ret)
> + return ret;
> +
> + *val = (get_unaligned_be24(&dev->data[0]) >> 1) & GENMASK(15, 0);
> +
> + return ret;
> +}
> +
> +static int adrf6780_spi_write(struct adrf6780_dev *dev,
> + unsigned int reg,
> + unsigned int val)
> +{
> + put_unaligned_be24((val << 1) | (reg << 17), &dev->data[0]);
> +
> + return spi_write(dev->spi, &dev->data[0], 3);
> +}
> +
> +static int adrf6780_spi_update_bits(struct adrf6780_dev *dev, unsigned int reg,
> + unsigned int mask, unsigned int val)
> +{
> + int ret;
> + unsigned int data, temp;
> +
> + ret = adrf6780_spi_read(dev, reg, &data);
> + if (ret)
> + return ret;
> +
> + temp = (data & ~mask) | (val & mask);
> +
> + return adrf6780_spi_write(dev, reg, temp);
> +}
> +
> +static int adrf6780_read_voltage_raw(struct adrf6780_dev *dev, unsigned int *read_val)
> +{
> + int ret;
> +
> + mutex_lock(&dev->lock);
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,
> + ADRF6780_ADC_EN_MSK |
> + ADRF6780_ADC_CLOCK_EN_MSK |
> + ADRF6780_ADC_START_MSK,
> + FIELD_PREP(ADRF6780_ADC_EN_MSK, 1) |
> + FIELD_PREP(ADRF6780_ADC_CLOCK_EN_MSK, 1) |
> + FIELD_PREP(ADRF6780_ADC_START_MSK, 1));
> + if (ret)
> + goto exit;
> +
> + usleep_range(200, 250);
> +
> + ret = adrf6780_spi_read(dev, ADRF6780_REG_ADC_OUTPUT, read_val);
> + if (ret)
> + goto exit;
> +
> + if (!(read_val & ADRF6780_ADC_STATUS_MSK)) {
> + ret = -EINVAL;
> + goto exit;
> + }
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,
> + ADRF6780_ADC_START_MSK,
> + FIELD_PREP(ADRF6780_ADC_START_MSK, 0));
> + if (ret)
> + goto exit;
> +
> + ret = adrf6780_spi_read(dev, ADRF6780_REG_ADC_OUTPUT, read_val);
> +
> +exit:
> + mutex_unlock(&dev->lock);
> + return ret;
> +}
> +
> +static int adrf6780_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val, int *val2, long info)
> +{
> + struct adrf6780_dev *dev = iio_priv(indio_dev);
> + unsigned int data;
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_RAW:
> + ret = adrf6780_read_voltage_raw(dev, &data);
> + if (ret)
> + return ret;
> +
> + *val = data & ADRF6780_ADC_VALUE_MSK;
> +
> + return IIO_VAL_INT;
> +
> + case IIO_CHAN_INFO_SCALE:
> + ret = adrf6780_spi_read(dev, ADRF6780_REG_LINEARIZE, &data);
> + if (ret)
> + return ret;
> +
> + *val = data & ADRF6780_RDAC_LINEARIZE_MSK;
> +
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_PHASE:
> + ret = adrf6780_spi_read(dev, ADRF6780_REG_LO_PATH, &data);
> + if (ret)
> + return ret;
> +
> + switch (chan->channel2) {
> + case IIO_MOD_I:
> + *val = data & ADRF6780_I_PATH_PHASE_ACCURACY_MSK;
> +
> + return IIO_VAL_INT;
> + case IIO_MOD_Q:
> + *val = FIELD_GET(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, data);
> +
> + return IIO_VAL_INT;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adrf6780_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long info)
> +{
> + struct adrf6780_dev *dev = iio_priv(indio_dev);
> + int ret;
> +
> + switch (info) {
> + case IIO_CHAN_INFO_SCALE:
> + return adrf6780_spi_write(dev, ADRF6780_REG_LINEARIZE, val);
> + case IIO_CHAN_INFO_PHASE:
> + switch (chan->channel2) {
> + case IIO_MOD_I:
> + mutex_lock(&dev->lock);
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,
> + ADRF6780_I_PATH_PHASE_ACCURACY_MSK,
> + FIELD_PREP(ADRF6780_I_PATH_PHASE_ACCURACY_MSK, val));
> + mutex_unlock(&dev->lock);
> +
> + return ret;
> + case IIO_MOD_Q:
> + mutex_lock(&dev->lock);
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,
> + ADRF6780_Q_PATH_PHASE_ACCURACY_MSK,
> + FIELD_PREP(ADRF6780_Q_PATH_PHASE_ACCURACY_MSK, val));
> + mutex_unlock(&dev->lock);
> +
> + return ret;
> + default:
> + return -EINVAL;
> + }
> + default:
> + return -EINVAL;
> + }
> +}
> +
> +static int adrf6780_reg_access(struct iio_dev *indio_dev,
> + unsigned int reg,
> + unsigned int write_val,
> + unsigned int *read_val)
> +{
> + struct adrf6780_dev *dev = iio_priv(indio_dev);
> +
> + if (read_val)
> + return adrf6780_spi_read(dev, reg, read_val);
> + else
> + return adrf6780_spi_write(dev, reg, write_val);
> +}
> +
> +static const struct iio_info adrf6780_info = {
> + .read_raw = adrf6780_read_raw,
> + .write_raw = adrf6780_write_raw,
> + .debugfs_reg_access = &adrf6780_reg_access,
> +};
> +
> +#define ADRF6780_CHAN(_channel) { \
> + .type = IIO_VOLTAGE, \
> + .output = 1, \
> + .indexed = 1, \
> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
> + BIT(IIO_CHAN_INFO_SCALE) \
> +}
> +
> +#define ADRF6780_CHAN_IQ(_channel, rf_comp) { \
> + .type = IIO_ALTVOLTAGE, \
> + .modified = 1, \
> + .output = 1, \
> + .indexed = 1, \
> + .channel2 = IIO_MOD_##rf_comp, \
> + .channel = _channel, \
> + .info_mask_separate = BIT(IIO_CHAN_INFO_PHASE) \
> +}
> +
> +static const struct iio_chan_spec adrf6780_channels[] = {
> + ADRF6780_CHAN(0),
> + ADRF6780_CHAN_IQ(0, I),
> + ADRF6780_CHAN_IQ(0, Q),
> +};




> +
> +static int adrf6780_reset(struct adrf6780_dev *dev)
> +{
> + int ret;
> + struct spi_device *spi = dev->spi;
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_CONTROL,
> + ADRF6780_SOFT_RESET_MSK,
> + FIELD_PREP(ADRF6780_SOFT_RESET_MSK, 1));
> + if (ret) {
> + dev_err(&spi->dev, "ADRF6780 SPI software reset failed.\n");
> + return ret;
> + }
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_CONTROL,
> + ADRF6780_SOFT_RESET_MSK,
> + FIELD_PREP(ADRF6780_SOFT_RESET_MSK, 0));
> + if (ret) {
> + dev_err(&spi->dev, "ADRF6780 SPI software reset disable failed.\n");
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static int adrf6780_init(struct adrf6780_dev *dev)
> +{
> + int ret;
> + unsigned int chip_id, enable_reg, enable_reg_msk;
> + struct spi_device *spi = dev->spi;
> +
> + /* Perform a software reset */
> + ret = adrf6780_reset(dev);
> + if (ret)
> + return ret;
> +
> + ret = adrf6780_spi_read(dev, ADRF6780_REG_CONTROL, &chip_id);
> + if (ret)
> + return ret;
> +
> + chip_id = FIELD_GET(ADRF6780_CHIP_ID_MSK, chip_id);
> + if (chip_id != ADRF6780_CHIP_ID) {
> + dev_err(&spi->dev, "ADRF6780 Invalid Chip ID.\n");
> + return -EINVAL;
> + }
> +
> + enable_reg_msk = ADRF6780_VGA_BUFFER_EN_MSK |
> + ADRF6780_DETECTOR_EN_MSK |
> + ADRF6780_LO_BUFFER_EN_MSK |
> + ADRF6780_IF_MODE_EN_MSK |
> + ADRF6780_IQ_MODE_EN_MSK |
> + ADRF6780_LO_X2_EN_MSK |
> + ADRF6780_LO_PPF_EN_MSK |
> + ADRF6780_LO_EN_MSK |
> + ADRF6780_UC_BIAS_EN_MSK;
> +
> + enable_reg = FIELD_PREP(ADRF6780_VGA_BUFFER_EN_MSK, dev->vga_buff_en) |
> + FIELD_PREP(ADRF6780_DETECTOR_EN_MSK, 1) |
> + FIELD_PREP(ADRF6780_LO_BUFFER_EN_MSK, dev->lo_buff_en) |
> + FIELD_PREP(ADRF6780_IF_MODE_EN_MSK, dev->if_mode_en) |
> + FIELD_PREP(ADRF6780_IQ_MODE_EN_MSK, dev->iq_mode_en) |
> + FIELD_PREP(ADRF6780_LO_X2_EN_MSK, dev->lo_x2_en) |
> + FIELD_PREP(ADRF6780_LO_PPF_EN_MSK, dev->lo_ppf_en) |
> + FIELD_PREP(ADRF6780_LO_EN_MSK, dev->lo_en) |
> + FIELD_PREP(ADRF6780_UC_BIAS_EN_MSK, dev->uc_bias_en);
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_ENABLE, enable_reg_msk, enable_reg);
> + if (ret)
> + return ret;
> +
> + ret = adrf6780_spi_update_bits(dev, ADRF6780_REG_LO_PATH,
> + ADRF6780_LO_SIDEBAND_MSK,
> + FIELD_PREP(ADRF6780_LO_SIDEBAND_MSK, dev->lo_sideband));
> + if (ret)
> + return ret;
> +
> + return adrf6780_spi_update_bits(dev, ADRF6780_REG_ADC_CONTROL,
> + ADRF6780_VDET_OUTPUT_SELECT_MSK,
> + FIELD_PREP(ADRF6780_VDET_OUTPUT_SELECT_MSK, dev->vdet_out_en));
> +}
> +
> +static void adrf6780_clk_disable(void *data)
> +{
> + clk_disable_unprepare(data);
> +}
> +
> +static void adrf6780_dt_parse(struct adrf6780_dev *dev)
> +{
> + struct spi_device *spi = dev->spi;
> +
> + dev->vga_buff_en = device_property_read_bool(&spi->dev, "adi,vga-buff-en");
> + dev->lo_buff_en = device_property_read_bool(&spi->dev, "adi,lo-buff-en");
> + dev->if_mode_en = device_property_read_bool(&spi->dev, "adi,if-mode-en");
> + dev->iq_mode_en = device_property_read_bool(&spi->dev, "adi,iq-mode-en");
> + dev->lo_x2_en = device_property_read_bool(&spi->dev, "adi,lo-x2-en");
> + dev->lo_ppf_en = device_property_read_bool(&spi->dev, "adi,lo-ppf-en");
> + dev->lo_en = device_property_read_bool(&spi->dev, "adi,lo-en");
> + dev->uc_bias_en = device_property_read_bool(&spi->dev, "adi,uc-bias-en");
> + dev->lo_sideband = device_property_read_bool(&spi->dev, "adi,lo-sideband");
> + dev->vdet_out_en = device_property_read_bool(&spi->dev, "adi,vdet-out-en");
> +}
> +
> +static int adrf6780_probe(struct spi_device *spi)
> +{
> + struct iio_dev *indio_dev;
> + struct adrf6780_dev *dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*dev));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + dev = iio_priv(indio_dev);
> +
> + indio_dev->info = &adrf6780_info;
> + indio_dev->name = "adrf6780";
> + indio_dev->channels = adrf6780_channels;
> + indio_dev->num_channels = ARRAY_SIZE(adrf6780_channels);
> +
> + dev->spi = spi;
> +
> + adrf6780_dt_parse(dev);
> +
> + dev->clkin = devm_clk_get(&spi->dev, "lo_in");
> + if (IS_ERR(dev->clkin))
> + return PTR_ERR(dev->clkin);
> +
> + ret = clk_prepare_enable(dev->clkin);
> + if (ret < 0)
> + return ret;
> +
> + ret = devm_add_action_or_reset(&spi->dev, adrf6780_clk_disable, dev->clkin);
> + if (ret < 0)
> + return ret;
> +
> + mutex_init(&dev->lock);
> +
> + ret = adrf6780_init(dev);
> + if (ret)
> + return ret;
> +
> + return devm_iio_device_register(&spi->dev, indio_dev);
> +}
> +
> +static const struct spi_device_id adrf6780_id[] = {
> + { "adrf6780", 0 },
> + {}
> +};
> +MODULE_DEVICE_TABLE(spi, adrf6780_id);
> +
> +static const struct of_device_id adrf6780_of_match[] = {
> + { .compatible = "adi,adrf6780" },
> + {}
> +};
> +MODULE_DEVICE_TABLE(of, adrf6780_of_match);
> +
> +static struct spi_driver adrf6780_driver = {
> + .driver = {
> + .name = "adrf6780",
> + .of_match_table = adrf6780_of_match,
> + },
> + .probe = adrf6780_probe,
> + .id_table = adrf6780_id,
> +};
> +module_spi_driver(adrf6780_driver);
> +
> +MODULE_AUTHOR("Antoniu Miclaus <antoniu.miclaus@xxxxxxxxxx");
> +MODULE_DESCRIPTION("Analog Devices ADRF6780");
> +MODULE_LICENSE("GPL v2");