Re: [PATCH 1/4] dt-bindings: mfd: ricoh,rn5t618: ADC related nodes and properties

[Jonathan Cameron]

On Sat,  3 Jul 2021 10:42:21 +0200
Andreas Kemnade <andreas@xxxxxxxxxxxx> wrote:

> Add ADC related nodes and properties. This will allow to wire
> up ADC channels to consumers, especially to measure input voltages
> by the power subdevice.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  .../bindings/mfd/ricoh,rn5t618.yaml           | 53 +++++++++++++++++++
>  1 file changed, 53 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
> index 032a7fb0b4a7..185f87a14a54 100644
> --- a/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
> +++ b/Documentation/devicetree/bindings/mfd/ricoh,rn5t618.yaml
> @@ -73,6 +73,48 @@ properties:
>      description: |
>        See Documentation/devicetree/bindings/power/power-controller.txt
>  
> +  adc:
> +    type: object
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - ricoh,rn5t618-adc
> +          - ricoh,rc5t619-adc
> +
> +      "#io-channel-cells":
> +        const: 1
> +
> +    additionalProperties: false
> +
> +    required:
> +      - compatible
> +      - "#io-channel-cells"

Strictly required?  If not used below (where it is optional)
then why do we require the ADC driver to provided the services?

I don't mind you leave it as it is though if you prefer - it doesn't
do any harm!

> +
> +  power:
> +    type: object
> +
> +    properties:
> +      compatible:
> +        enum:
> +          - ricoh,rn5t618-power
> +          - ricoh,rc5t619-power
> +
> +      io-channels:
> +        items:
> +          - description: ADP Voltage Channel
> +          - description: USB Voltage Channel
> +
> +      io-channel-names:
> +        items:
> +          - const: vadp
> +          - const: vusb
> +
> +    additionalProperties: false
> +
> +    required:
> +      - compatible
> +
>    regulators:
>      type: object
>  
> @@ -96,6 +138,17 @@ examples:
>          interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
>          system-power-controller;
>  
> +        rn5t618_adc: adc {
> +          compatible = "ricoh,rn5t618-adc";
> +          #io-channel-cells = <1>;
> +        };
> +
> +        power {
> +          compatible = "ricoh,rn5t618-power";
> +          io-channels = <&rn5t618_adc 2>, <&rn5t618_adc 3>;
> +          io-channel-names = "vadp", "vusb";
> +        };
> +
>          regulators {
>            DCDC1 {
>              regulator-min-microvolt = <1050000>;