Re: [PATCH v2 rdma-next] RDMA/mlx5: Enable Relaxed Ordering by default for kernel ULPs

[Leon Romanovsky]

On Thu, Jun 24, 2021 at 02:06:46AM +0300, Max Gurtovoy wrote:
> 
> On 6/9/2021 2:05 PM, Leon Romanovsky wrote:
> > From: Avihai Horon <avihaih@xxxxxxxxxx>
> > 
> > Relaxed Ordering is a capability that can only benefit users that support
> > it. All kernel ULPs should support Relaxed Ordering, as they are designed
> > to read data only after observing the CQE and use the DMA API correctly.
> > 
> > Hence, implicitly enable Relaxed Ordering by default for kernel ULPs.
> > 
> > Signed-off-by: Avihai Horon <avihaih@xxxxxxxxxx>
> > Signed-off-by: Leon Romanovsky <leonro@xxxxxxxxxx>
> > ---
> > Changelog:
> > v2:
> >   * Dropped IB/core patch and set RO implicitly in mlx5 exactly like in
> >     eth side of mlx5 driver.
> > v1: https://lore.kernel.org/lkml/cover.1621505111.git.leonro@xxxxxxxxxx
> >   * Enabled by default RO in IB/core instead of changing all users
> > v0: https://lore.kernel.org/lkml/20210405052404.213889-1-leon@xxxxxxxxxx
> > ---
> >   drivers/infiniband/hw/mlx5/mr.c | 10 ++++++----
> >   drivers/infiniband/hw/mlx5/wr.c |  5 ++++-
> >   2 files changed, 10 insertions(+), 5 deletions(-)
> > 
> > diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
> > index 3363cde85b14..2182e76ae734 100644
> > --- a/drivers/infiniband/hw/mlx5/mr.c
> > +++ b/drivers/infiniband/hw/mlx5/mr.c
> > @@ -69,6 +69,7 @@ static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
> >   					  struct ib_pd *pd)
> >   {
> >   	struct mlx5_ib_dev *dev = to_mdev(pd->device);
> > +	bool ro_pci_enabled = pcie_relaxed_ordering_enabled(dev->mdev->pdev);
> >   	MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
> >   	MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
> > @@ -78,10 +79,10 @@ static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
> >   	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
> >   		MLX5_SET(mkc, mkc, relaxed_ordering_write,
> > -			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
> > +			 acc & IB_ACCESS_RELAXED_ORDERING && ro_pci_enabled);
> >   	if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
> >   		MLX5_SET(mkc, mkc, relaxed_ordering_read,
> > -			 !!(acc & IB_ACCESS_RELAXED_ORDERING));
> > +			 acc & IB_ACCESS_RELAXED_ORDERING && ro_pci_enabled);
> 
> Jason,
> 
> If it's still possible to add small change, it will be nice to avoid
> calculating "acc & IB_ACCESS_RELAXED_ORDERING && ro_pci_enabled" twice.

The patch is part of for-next now, so feel free to send followup patch.

Thanks

diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index c1e70c99b70c..c4f246c90c4d 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -69,7 +69,8 @@ static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
                                          struct ib_pd *pd)
 {
        struct mlx5_ib_dev *dev = to_mdev(pd->device);
-       bool ro_pci_enabled = pcie_relaxed_ordering_enabled(dev->mdev->pdev);
+       bool ro_pci_enabled = acc & IB_ACCESS_RELAXED_ORDERING &&
+                             pcie_relaxed_ordering_enabled(dev->mdev->pdev);

        MLX5_SET(mkc, mkc, a, !!(acc & IB_ACCESS_REMOTE_ATOMIC));
        MLX5_SET(mkc, mkc, rw, !!(acc & IB_ACCESS_REMOTE_WRITE));
@@ -78,11 +79,9 @@ static void set_mkc_access_pd_addr_fields(void *mkc, int acc, u64 start_addr,
        MLX5_SET(mkc, mkc, lr, 1);

        if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_write))
-               MLX5_SET(mkc, mkc, relaxed_ordering_write,
-                        (acc & IB_ACCESS_RELAXED_ORDERING) && ro_pci_enabled);
+               MLX5_SET(mkc, mkc, relaxed_ordering_write, ro_pci_enabled);
        if (MLX5_CAP_GEN(dev->mdev, relaxed_ordering_read))
-               MLX5_SET(mkc, mkc, relaxed_ordering_read,
-                        (acc & IB_ACCESS_RELAXED_ORDERING) && ro_pci_enabled);
+               MLX5_SET(mkc, mkc, relaxed_ordering_read, ro_pci_enabled);

        MLX5_SET(mkc, mkc, pd, to_mpd(pd)->pdn);
        MLX5_SET(mkc, mkc, qpn, 0xffffff);
(END)


> 
>